EN 62841-2-17-2017 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-17 Particular requirements for hand-held routers.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery SafetyPart 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017, modified)BS EN 62841-2-17:2017National fore

2、wordThis British Standard is the UK implementation of EN 62841-2-17:2017. It is derived from IEC 62841-2-17:2017. It supersedes BS EN 60745-2-17:2010, which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common

3、modification is indicated in the text by tags .The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not pur

4、port to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 92312 8ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obligat

5、ions.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62841-2-17:2017EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 62841-2-17December 20

6、17ICS 25.140.20 Supersedes EN 60745-2-17:2010CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC Ref. No. EN 62841-2-17:2017: EAll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Electric motor-operated hand-held tools, transportab

7、le tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017, modified)Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-17: Exigences particulires pour les dfonceuses portatives

8、 (IEC 62841-2-17:2017, modifie)Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-17: Besondere Anforderungen fr handgefhrte Oberfrsen (IEC 62841-2-17:2017, modifiziert)This European Standard was approved by CENELEC on 2017

9、-08-28. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be ob

10、tained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified

11、to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece

12、, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.English VersionEuropean Committee for Electrotechnical Standardization Comit Europen de

13、Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung EN 62841-2-17:2017 (E)European forewordThe text of document 116/335/FDIS, future edition 1 of IEC 62841-2-17, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vot

14、e and approved by CENELEC as EN 62841-2-17:2017.A draft amendment, which covers common modifications to IEC 62841-2-17 (116/335/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC.The following dates are fixed: latest date by which the document has to

15、be implemented at national level by publication of an identical national standard or by endorse-ment(dop) 2018-06-15 latest date by which the national standards conflicting with the doc-ument have to be withdrawn(dow) 2021-12-15EN 62841-2-17:2017 supersedes EN 60745-2-17:2010.This European Standard

16、is divided into four parts:Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard;Part 2, 3 or 4: Requirements for particular types of tools which

17、either supplement or modify the re-quirements given in Part 1 to account for the particular hazards and characteristics of these specific tools.This Part 2-17 is to be used in conjunction with EN 62841-1:2015.This Part 2-17 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as

18、to convert it into the European Standard: Particular requirements for hand-held routers.Where a particular subclause of Part 1 is not mentioned in this Part 2-17, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Pa

19、rt 1 is to be adapted accordingly.The following print types are used: requirements; in roman type test specifications: in italic type; notes: in smaller roman type.The terms defined in Clause 3 are printed in bold typeface.Subclauses, notes, tables and figures which are additional to those in Part 1

20、 are numbered starting from 101.Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-17:2017 are prefixed “Z”.This European Standard follows the overall requirements of EN ISO 12100.Attention is drawn to the possibility that some of the elements of thi

21、s document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.2BS EN 62841-2-17:2017EN 62841-2-17:2017 (E)This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Asso

22、ciation and supports essential requirements of EU Directive.For the relationship with EU Directive, see informative Annex ZZ, which is an integral part of this document.Compliance with the clauses of Part 1 together with this Part 2-17 provides one means of conforming with the essential health and s

23、afety requirements of the Directive concerned.Endorsement noticeThe text of the International Standard IEC 62841-2-17:2017 was approved by CENELEC as a European Standard with agreed common modifications.3BS EN 62841-2-17:2017EN 62841-2-17:2017 (E)Annex ZZ (informative) Relationship between this Euro

24、pean Standard and the essential requirements of Directive 2006/42/EC 2006 OJ L157 aimed to be coveredThis European Standard has been prepared under a Commissions standardisation request M/396 to provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the Europe

25、an Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC.Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the s

26、cope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations.Table ZZ.1 Correspondence between this European Standard and Annex I of Directive 2006/42/ECEssential Requirements of Directive 2006/42/ECClause(s) / su

27、b-clause(s) of this EN Remarks / NotesAnnex I All clausesAll corresponding requirements are covered by complying with all clauses.WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the

28、European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union.WARNING 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard.4BS EN 62841-2-17:2017FOREWORD . 61 Scope . 12 Nor

29、mative references 13 Terms and definitions . 14 General requirements . 25 General conditions for the tests 26 Radiation, toxicity and similar hazards 27 Classification 28 Marking and instructions 29 Protection against access to live parts . 310 Starting . 311 Input and current 312 Heating 313 Resist

30、ance to heat and fire . 314 Moisture resistance . 315 Resistance to rusting 316 Overload protection of transformers and associated circuits 417 Endurance 418 Abnormal operation . 419 Mechanical hazards . 420 Mechanical strength 621 Construction 622 Internal wiring 623 Components . 724 Supply connect

31、ion and external flexible cords . 725 Terminals for external conductors 726 Provision for earthing . 727 Screws and connections 728 Creepage distances, clearances and distances through insulation 7Annexes .11Annex I (normative) Measurement of noise and vibration emissions .12Annex K (normative) Batt

32、ery tools and battery packs .15Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources .17Bibliography .19IEC 62841-2-17:2017 ISO 2017 All rights reserved 5Contents PageBS EN 62841-2-17:2017EN 62841-2-17:2017 (E)FOREWORD1) The International Electrot

33、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To

34、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation

35、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO

36、) in accordance with conditions determined by agreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fro

37、m all interested IEC National Committees.3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be hel

38、d responsible for the way in which they are used or for any misinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any div

39、ergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC

40、marks of conformity. IEC is not responsible for any services carried out by independent certification bodies.6) All users should ensure that they have the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individual exper

41、ts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Pu

42、blication or any other IEC Publications.8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publ

43、ication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights.International Standard IEC 62841-2-17 has been prepared by IEC technical committee 116: Safety of motor-operated electric tools.The text of this standard is based on the follo

44、wing documents:FDIS Report on voting116/335/FDIS 116/342/RVDFull information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table.This document has been drafted in accordance with the ISO/IEC Directives, Part 2.This Part 2-17

45、 is to be used in conjunction with the first edition of IEC 62841-1 (2014).6BS EN 62841-2-17:2017EN 62841-2-17:2017 (E)This Part 2-17 supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC standard: Particular requirements for hand-held routers.Where a par

46、ticular subclause of Part 1 is not mentioned in this Part 2-17, that subclause applies as far as relevant. Where this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly.The following print types are used: requirements: in roman type;

47、 test specifications: in italic type; notes: in small roman type.The terms defined in Clause 3 are printed in bold typeface.Subclauses, notes and figures which are additional to those in Part 1 are numbered starting from 101.A list of all parts of the IEC 62841 series, under the general title: Elect

48、ric motor-operated hand-held tools, transportable tools and lawn and garden machinery Safety, can be found on the IEC website.The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the

49、data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended.NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests.It is the recommendation of the committee that the content