EN 62841-2-9-2015 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 2-9 Particular requirements for hand-held tappers and.pdf

1、Electric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 2-9: Particular requirements for hand-held tappers and threaders (IEC 62841-2-9:2015, modified)BS EN 62841-2-9:2015BS EN 62841-2-9:2015 Incorporating corrigenda October 2015BSI Standards PublicationWB

2、11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-9 April 2015 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-9: Particular requirements for ha

3、nd-held tappers and threaders (IEC 62841-2-9:2015 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-9: Exigences particulires pour les taraudeuses et les fileteuses Portatives (IEC 62841-2-9:2015 , modifie) Elektrische motorbetrieben

4、e handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-9: Besondere Anforderungen fr handgefhrte Gewindebohrer und Gewindeschneider (IEC 62841-2-9:2015 , modifiziert) This European Standard was approved by CENELEC on 2015-01-12. CENELEC members are boun

5、d to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CE

6、N-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management

7、Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland,

8、Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee

9、fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-9:2015 E BS EN 62841-2-9:2015 BRITISH STANDARDNational forewordThis British S

10、tandard is the UK implementation of EN 62841-2-9:2015, incorporating corrigendum October 2015. It is derived from IEC 62841-2-9:2015. It supersedes BS EN 60745-2-9:2009, which will be withdrawn on 21 August 2019.NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61029 series a

11、nd parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 62841-3 series.T

12、he CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tool

13、s.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 92426 2ICS 25.140.20Compliance with a British Standard cannot co

14、nfer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2015.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Correction to supersession details in national foreword30 Novemb

15、er 2016 Implementation of IEC corrigendum October 2015: Table 4 in 18.8 and Table 4 in K.18.8 updatedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-2-9 April 2015 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Sa

16、fety - Part 2-9: Particular requirements for hand-held tappers and threaders (IEC 62841-2-9:2015 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 2-9: Exigences particulires pour les taraudeuses et les fileteuses Portatives (IEC 62841

17、-2-9:2015 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 2-9: Besondere Anforderungen fr handgefhrte Gewindebohrer und Gewindeschneider (IEC 62841-2-9:2015 , modifiziert) This European Standard was approved by

18、CENELEC on 2015-01-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national sta

19、ndards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own langu

20、age and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc

21、e, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Norm

22、alisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-2-9:2015 E EN 62841-2-9:2015 - 2

23、 - Foreword The text of document 116/199/FDIS, future edition 1 of IEC 62841-2-9, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-9:2015. A draft amendment, which covers common modifications to IEC

24、62841-2-9 (116/199/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 20

25、15-10-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-12 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identify

26、ing any or all such patent rights. This document supersedes EN 60745-2-9:2009. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Dir

27、ective(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 62841-2-9:2015 was approved by CENELEC as a European Standard with agreed common modifications. The Bibliography of EN 62841-1:201X is applicable. BS EN 62841

28、-2-9:2015- 3 - EN 62841-2-9:2015 BS EN 62841-2-9:2015Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its applicat

29、ion. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. This

30、annex from EN 62841-1:201X is applicable with the following addition: Publication Year Title EN/HD Year ISO 7-1 1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation - - ISO 65 1981 Carbon steel tubes suitable for screwing in accordanc

31、e with ISO 7-1 - - Annex ZZ (informative) Coverage of Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant E

32、ssential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products

33、 falling within the scope of this standard. EN 62841-2-9:2015 - 2 - Foreword The text of document 116/199/FDIS, future edition 1 of IEC 62841-2-9, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-9:2

34、015. A draft amendment, which covers common modifications to IEC 62841-2-9 (116/199/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publica

35、tion of an identical national standard or by endorsement (dop) 2015-10-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-01-12 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent righ

36、ts. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 60745-2-9:2009. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential

37、requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 62841-2-9:2015 was approved by CENELEC as a European Standard with agreed common modification

38、s. The Bibliography of EN 62841-1:201X is applicable. BS EN 62841-2-9:2015- 3 - EN 62841-2-9:2015 BS EN 62841-2-9:2015Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively r

39、eferenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common mod

40、ifications, indicated by (mod), the relevant EN/HD applies. This annex from EN 62841-1:201X is applicable with the following addition: Publication Year Title EN/HD Year ISO 7-1 1994 Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions, tolerances and designation - -

41、ISO 65 1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 - - Annex ZZ (informative) Coverage of Essential Requirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade As

42、sociation and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requi

43、rements and other EU Directives may be applicable to the products falling within the scope of this standard. 4 IEC 62841-2-9:2015 IEC 2015 CONTENTS FOREWORD . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General requirements 8 5 General conditions for the tests . 8 6 Radiation, t

44、oxicity and similar hazards . 9 7 Classification . 9 8 Marking and instructions 9 9 Protection against access to live parts .10 10 Starting . 10 11 Input and current . 10 12 Heating 10 13 Resistance to heat and fire 11 14 Moisture resistance .11 15 Resistance to rusting .11 16 Overload protection of

45、 transformers and associated circuits 11 17 Endurance .11 18 Abnormal operation .11 19 Mechanical hazards . 12 20 Mechanical strength 12 21 Construction 13 22 Internal wiring 13 23 Components 13 24 Supply connection and external flexible cords . 13 25 Terminals for external conductors 13 26 Provisio

46、n for earthing 13 27 Screws and connections 13 28 Creepage distances, clearances and distances through insulation . 14 Annexes . 16 Annex I (informative) Measurement of noise and vibration emissions . 16 Annex K (normative) Battery tools and battery packs . 19 Bibliography 20 Figure 101 Threader wit

47、h support device . 14 Figure 102 Set-up for testing the support device 15 Figure I.101 Position of transducers for tappers . 17 Figure I.102 Position of transducers for threaders 18 BS EN 62841-2-9:2015IEC 62841-2-9:2015 IEC 2015 5 Table 101 Load torque .11 Table 4 Required performance levels . 12 T

48、able I.101 Operating conditions for tappers and threaders . 17 Table 4 Required performance levels . 19 BS EN 62841-2-9:2015 4 IEC 62841-2-9:2015 IEC 2015 CONTENTS FOREWORD . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General requirements 8 5 General conditions for the tests .

49、8 6 Radiation, toxicity and similar hazards . 9 7 Classification . 9 8 Marking and instructions 9 9 Protection against access to live parts .10 10 Starting . 10 11 Input and current . 10 12 Heating 10 13 Resistance to heat and fire 11 14 Moisture resistance .11 15 Resistance to rusting .11 16 Overload protection of transformers and associated circuits 11 17 Endurance .11 18 Abnormal operation .11 19 Mechanical hazards . 12 20 Mechanical strength 12 21 Construction 13 22 Internal wiring 13 23 Com