EN 62841-3-13-2017 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery - Safety - Part 3-13 Particular requirements for transportable drill.pdf

1、Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery SafetyPart 3-13: Particular requirements for transportable drillsBS EN 62841-3-13:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISC

2、HE NORM EN 62841-3-13 June 2017 ICS 25.120.40 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-13: Particular requirements for transportable drills (IEC 62841-3-13:2017 , modified) Outils lectroportatifs moteur, outils porta

3、bles et machines pour jardins et pelouses - Scurit - Partie 3-13: Exigences particulires pour les perceuses transportables (IEC 62841-3-13:2017 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-13: Besondere Anf

4、orderungen fr transportable Bohrmaschinen (IEC 62841-3-13:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-03-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n

5、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German)

6、. A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, B

7、ulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swed

8、en, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploit

9、ation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-13:2017 E National forewordThis British Standard is the UK implementation of EN 62841-3-13:2017. It is identical to IEC 62841-3-13:2017.The UK participation in its preparation was entrusted to Technical Co

10、mmittee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The B

11、ritish Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93490 2ICS 25.120.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 Au

12、gust 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62841313:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-3-13 June 2017 ICS 25.120.40 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machin

13、ery - Safety - Part 3-13: Particular requirements for transportable drills (IEC 62841-3-13:2017 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-13: Exigences particulires pour les perceuses transportables (IEC 62841-3-13:2017 , mod

14、ifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-13: Besondere Anforderungen fr transportable Bohrmaschinen (IEC 62841-3-13:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-03-13. CENELEC m

15、embers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applic

16、ation to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENE

17、LEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice

18、land, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniq

19、ue Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-13:2017 E BS EN 62841313:2017EN 62841-3-13:2017 2 Euro

20、pean foreword The text of document 116/309/FDIS, future edition 1 of IEC 62841-3-13, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-3-13:2017. A draft amendment, which covers common modifications to

21、IEC 62841-3-13 (116/309/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (do

22、p) 2018-03-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-13 This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this stan

23、dard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This

24、Part 3-13 is to be used in conjunction with EN 62841-1:2015. This Part 3-13 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for transportable drills. Where a particular subclause of Part 1 is not mentioned

25、in this Part 3-13, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - no

26、tes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-1

27、3:2017 are prefixed “Z”. This European Standard follows the overall requirements of EN ISO 12100. BS EN 62841313:2017EN 62841-3-13:2017 2 European foreword The text of document 116/309/FDIS, future edition 1 of IEC 62841-3-13, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was subm

28、itted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-3-13:2017. A draft amendment, which covers common modifications to IEC 62841-3-13 (116/309/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: la

29、test date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-03-13 This European Standard is divide

30、d into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either

31、supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-13 is to be used in conjunction with EN 62841-1:2015. This Part 3-13 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to con

32、vert it into the European Standard: Particular requirements for transportable drills. Where a particular subclause of Part 1 is not mentioned in this Part 3-13, that subclause applies as far as relevant. When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part

33、 1 is to be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in

34、 Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-13:2017 are prefixed “Z”. This European Standard follows the overall requirements of EN ISO 12100. EN 62841-3-13:2017 3 Attention is drawn to the possibility t

35、hat some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and

36、supports essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 3-13 provides one means of conforming with the essential health and safet

37、y requirements of the Directive concerned. BS EN 62841313:2017EN 62841-3-13:2017 4 Endorsement notice The text of the International Standard IEC 62841-3-13:2017 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 1 Scope Replace Note 103 with the fol

38、lowing: NOTE 103 Radial arm drills and stationary drilling machines are covered by EN 12717. 8 Marking and instructions Add the following after 8.14.2 b): 8.14.2 Za) Replacement of items 3, 4 and 5 with the following: 3) The following information: that the declared noise emission value(s) have been

39、measured in accordance with a standard test method and may be used for comparing one tool with another; that the declared noise emission value(s) may also be used in a preliminary assessment of exposure. 4) A warning: that the noise emissions during actual use of the power tool can differ from the d

40、eclared values depending on the ways in which the tool is used especially what kind of workpiece is processed; and of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use. BS EN 62841313:2017EN 62841-3-13:2017 4 Endo

41、rsement notice The text of the International Standard IEC 62841-3-13:2017 was approved by CENELEC as a European Standard with agreed common modifications. COMMON MODIFICATIONS 1 Scope Replace Note 103 with the following: NOTE 103 Radial arm drills and stationary drilling machines are covered by EN 1

42、2717. 8 Marking and instructions Add the following after 8.14.2 b): 8.14.2 Za) Replacement of items 3, 4 and 5 with the following: 3) The following information: that the declared noise emission value(s) have been measured in accordance with a standard test method and may be used for comparing one to

43、ol with another; that the declared noise emission value(s) may also be used in a preliminary assessment of exposure. 4) A warning: that the noise emissions during actual use of the power tool can differ from the declared values depending on the ways in which the tool is used especially what kind of

44、workpiece is processed; and of the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use. EN 62841-3-13:2017 5 18 Abnormal operation Replace the existing Subclause 18.8 with the following: 18.8 Replacement of Table 4 by t

45、he following: Table 4 Required performance levels Type and purpose of SCF Minimum Performance Level (PL) Power switch - prevent unwanted switch-on b Power switch - provide desired switch-off b Any electronic control to pass the test of 18.3 a Prevent output speed from exceeding 130 % of rated no-loa

46、d speed without accessories mounted a Provide desired direction of rotation Not an SCF Prevent exceeding thermal limits as in Clause 18 a Prevent self-resetting as required in 23.3 b Provide run-down time as required by 19.103 a Stopping as required by 19.104 a Restart prevention as required by 19.1

47、04 b Restart prevention as required by 21.18.2.1 a 21 Construction Replace the existing Subclause 21.18.2.1 with the following: 21.18.2.1 Addition: The tool shall not restart after an interruption of the mains supply without releasing and re-actuating the power switch. Annex I Replace the title of A

48、nnex I with the following: Annex I (normative) Measurement of noise and vibration emissions and delete the note. BS EN 62841313:2017EN 62841-3-13:2017 6 Add the following annex: Annex ZZ (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC

49、2006 OJ L157 aimed to be covered This European Standard has been prepared under a Commissions standardisation request M/396 to provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within th