EN 62841-3-9-2015 en Electric motor-operated hand-held tools transportable tools and lawn and garden machinery C Safety C Part 3-9 Particular requirements for transportable mitre s.pdf

1、Electric motor-operated hand-held tools, transportabletools and lawn and gardenmachinery SafetyPart 3-9: Particular requirements for transportable mitre sawsBS EN 62841-3-9:2015Incorporating corrigendum August 2016(IEC 62841-3-9:2014, modified + COR1:2015)BSI Standards PublicationBS EN 62841-3-9:201

2、5 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 62841-3-9:2015. It is derived from IEC 62841-3-9:2015, incorporating corrigenda October 2015 and August 2016. It supersedes BS EN 61029-2-9:2012+A11:2013, which will be withdrawn on 21 July 2018.NOTE: The BS EN 6

3、2841 series supersedes the BS EN 60745 series, the BS EN 61029 series and parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-1:2009 will be fixed upon publi

4、cation of all standards in the BS EN 62841-2 and BS EN 62841-3 series.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags g65g66. IEC corrigendum October 2015 replaces Table 4.

5、The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of

6、 a contract. Users are responsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016ISBN 978 0 580 95954 7ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under

7、 the authority of the Standards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affected31 October 2016 Implementation of IEC corrigendum August 2016: Subclause 8.3 modifiedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-3-9 Decemb

8、er 2015 ICS 25.140.20 Supersedes EN 61029-2-9:2012English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 , modified + COR1:2015) Outils lectroportatifs mo

9、teur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-9: Exigences particulires pour les scies onglets transportables (IEC 62841-3-9:2014 , modifie + COR1:2015) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Siche

10、rheit - Teil 3-9: Besondere Anforderungen fr Gehrungskappsgen (IEC 62841-3-9:2014 , modifiziert + COR1:2015) This European Standard was approved by CENELEC on 2014-07-21. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

11、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official ver

12、sions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical co

13、mmittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia

14、, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELE

15、C All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-9:2015 EEN 62841-3-9:2015 - 2 - European foreword The text of document 116/181/FDIS, future edition 1 of IEC 62841-3-9, prepared by IEC/TC 116 “Safety of motor-operated electric tool

16、s“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-3-9:2015. A draft amendment, which covers common modifications to IEC 62841-3-9:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools” and approved by CENELEC. The following dates are fixed: g12

17、0 latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-18 g120 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2019-11-15 EN 62841-3-9:2015 sup

18、ersedes EN 61029-2-9:2012 + A11:2013. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which

19、is an integral part of this document. This European Standard is divided into four parts: Part 1: General requirements which are common to most electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or

20、 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-9 is to be used in conjunction with EN 62841-1:2015. This Part 3-9 supplements or modifies

21、the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for transportable mitre saws. Where a particular subclause of Part 1 is not mentioned in this Part 3-9, that subclause applies as far as relevant. Where this standard states “additio

22、n“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. Compliance with the clauses of Part 1 together with this Part 3 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements an

23、d other EU Directives can be applicable to the products falling within the scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. The following print types are used: - requirements; in roman type; - test specifications: in italic type; BS EN 62841-3-9:2015 2

24、 BS EN 62841-3-9:2015EN 62841-3-9:2015- 3 - EN 62841-3-9:2015 - notes: in small roman type. The terms defined in Clause 3 are printed in bold typeface. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, fi

25、gures and annexes which are additional to those in IEC 62841-3-9:2014 are prefixed “Z”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights

26、. Endorsement notice The text of the International Standard IEC 62841-3-9:2014 and COR1:2015 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 62841-3-9:2015 3 BS EN 62841-3-9:2015EN 62841-3-9:2015Annex ZA (normative) Normative references to international publica

27、tions with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced

28、 document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. This annex from Part 1 is applicable with the following addition: Publication Year Title EN/HD Year - - Tools for woodworkin

29、g - Safety requirements Part 1: Milling tools, circular saw blades EN 847-1 - ISO 180 - Plastics - Determination of Izod impact strength EN ISO 180 - 4 BS EN 62841-3-9:2015EN 62841-3-9:2015EN 62841-3-9:2015 - 6 - Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This

30、European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standar

31、d provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. BS EN 62841-3-9:2015 5 BS EN 62841-3-9:2015EN 62841-3-9:2015BS EN

32、 62841-3-9:2015IEC 62841-3-9:2014 IEC 2014 6 CONTENTSFOREWORD .81 Scope .102 Normative references .103 Terms and definitions 114 General requirements .125 General conditions for the tests 136 Radiation, toxicity and similar hazards 137 Classification 138 Marking and instructions .139 Protection agai

33、nst access to live parts 1610 Starting 1611 Input and current 1712 Heating 1713 Resistance to heat and fire .1714 Moisture resistance 1715 Resistance to rusting 1716 Overload protection of transformers and associated circuits 1717 Endurance 1718 Abnormal operation 1719 Mechanical hazards 1820 Mechan

34、ical strength .2221 Construction .2322 Internal wiring .2823 Components .2824 Supply connection and external flexible cables and cords .2825 Terminals for external conductors .2826 Provision for earthing2827 Screws and connections .2828 Creepage distances, clearances and distances through insulation

35、 .28Annex I (normative) Measurement of noise and vibration emissions 36Annex K (normative) Battery tools and battery packs 37Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolated sources .37Bibliography 38Figure 101 Mitre saw 29Figure 102 Saw blade quadra

36、nts 30Figure 103 Open guard construction .30Figure 104 Position of saw blade and lower guard relative to saw table 31Figure 105 Test probe 31Figure 106 Workpiece support dimensions .32BS EN 62841-3-9:2015IEC 62841-3-9:2014 IEC 2014 7 Figure 107 Minimum extension offence .33Figure 108 Distance betwee

37、n fence and saw blade .34Figure 109 Mitre saw with centre workpiece support .34Figure 110 Flange characteristics .35Table 4 Required performance levels 17Table I.101 Noise test conditions for mitre saws .36 4 IEC 62841-3-9:2014 IEC 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC MOTOR-OPER

38、ATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY SAFETY Part 3-9: Particular requirements for transportable mitre saws FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical commi

39、ttees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical

40、 Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental

41、and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreem

42、ents of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use an

43、d are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote

44、international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated

45、 in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All

46、 users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or

47、 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publicati

48、on. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such p

49、atent rights. International Standard IEC 62841-3-9 has been prepared by IEC technical committee 116: Safety of motor-operated electric tools. The text of this standard is based on the following documents: FDIS Report on voting 116/181/FDIS 116/192/RVDFull information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62841-3-9:2015BS EN 62841-3-9:2015IEC 6