EN 62952-2-2016 en Power sources for a wireless communication device - Part 2 Profile for power modules with batteries.pdf

1、Power sources for a wireless communication devicePart 2: Profile for power modules with batteriesBS EN 62952-2:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62952-2:2016. It isidentical to IE

2、C 62952-2:2016.The UK participation in its preparation was entrusted by Technical Com-mittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purpor

3、t to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 88956 1ICS 29.220.10; 33.040.40Compliance with a British Standard cannot confer immunity fromlegal o

4、bligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62952-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62952-2 December

5、2016 ICS 33.040.40; 29.220.10 English Version Power sources for a wireless communication device - Part 2: Profile for power modules with batteries (IEC 62952-2:2016) Sources dnergie pour un appareil de communication sans fil - Partie 2: Profil des modules dalimentation batteries (IEC 62952-2:2016) E

6、nergiequellen fr ein Funkkommunikationsgert - Teil 2: Profil fr Energiemodule mit Batterien (IEC 62952-2:2016) This European Standard was approved by CENELEC on 2016-11-09. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu

7、ropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official v

8、ersions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical

9、committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovak

10、ia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENE

11、LEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62952-2:2016 E BS EN 62952-2:2016EN 62952-2:2016 2 European foreword The text of document 65B/1054/FDIS, future edition 1 of IEC 62952-2, prepared by SC 65B “Measurement and control device

12、s” of IEC/TC 65 “Industrial process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62952-2:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical

13、national standard or by endorsement (dop) 2017-08-09 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-09 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CE

14、N shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62952-2:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be

15、 added for the standards indicated: IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2015. IEC 60086-1:2015 NOTE Harmonized as EN 60086-1:2016. BS EN 62952-2:2016EN 62952-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The

16、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Whe

17、n an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62952

18、-1 2016 Power sources for a wireless communication device - Part 1: General requirements of power modules - - BS EN 62952-2:2016 2 IEC 62952-2:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references. 6 3 Terms, definitions, abbreviated terms, acronyms and conventions 6

19、3.1 Terms and definitions 6 3.2 Abbreviated terms and acronyms . 6 3.3 Convention for profiles 6 4 Profile for power modules with batteries . 7 Bibliography . 9 Table 1 Layout of profile (sub)clause selection tables . 6 Table 2 Contents of (sub)clause selection tables 7 Table 3 General power module

20、profile selection 8 BS EN 62952-2:2016IEC 62952-2:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE Part 2: Profile for power modules with batteries FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization

21、 for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC pub

22、lishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may

23、 participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreeme

24、nt between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Pub

25、lications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or

26、 for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corres

27、ponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for a

28、ny services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and

29、IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Att

30、ention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.

31、IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62952-2 has been prepared by subcommittee 65B: Measurement and control devices, of IEC technical committee 65: Industrial-process measurement, control and automation. This standard is to be us

32、ed in conjunction with IEC 62952-1:2016. BS EN 62952-2:2016 4 IEC 62952-2:2016 IEC 2016 The text of this standard is based on the following documents: FDIS Report on voting 65B/1054/FDIS 65B/1057/RVD Full information on the voting for the approval of this standard can be found in the report on votin

33、g indicated in the above table. A list of all parts of the IEC 62952, under the general title Power source for a wireless communication device, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the con

34、tents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 62952-2

35、:2016IEC 62952-2:2016 IEC 2016 5 INTRODUCTION This Part 2 of IEC 62952 deals with a power module based on batteries. It provides one profile of IEC 62952-1 and a specific selection of batteries specified in other International Standards. It does not specify a battery. BS EN 62952-2:2016 6 IEC 62952-

36、2:2016 IEC 2016 POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE Part 2: Profile for power modules with batteries 1 Scope IEC 62952-2:2016 specifies a profile for a power module containing batteries used as power source for wireless communication devices. 2 Normative references The following docume

37、nts are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62952-1:2016,

38、 Power sources for a wireless communication device Part 1: General requirements of power sources 3 Terms, definitions, abbreviated terms, acronyms and conventions 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 62952-1 apply. ISO and IEC maintain t

39、erminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.2 Abbreviated terms and acronyms For the purposes of this document, the abbreviated terms and a

40、cronyms given in IEC 62952-1 apply. 3.3 Convention for profiles The profile is a selection of (sub)clause of one or more documents defined in tables, as shown in Table 1 and Table 2. The selected base specifications are indicated just before the selection table(s). Selection is done at the highest (

41、sub)clause level possible to define the profile selection unambiguously. Table 1 Layout of profile (sub)clause selection tables Clause Header Presence Constraints BS EN 62952-2:2016IEC 62952-2:2016 IEC 2016 7 Table 2 Contents of (sub)clause selection tables Column Text Meaning Clause Next clauses Ne

42、xt Annexes (sub)clause number of the base specifications any following clauses up to the last clause of the base specification any following annexes up to the last annex of the base specification Header (sub)clause title of the base specifications Presence NO This (sub)clause is not included in the

43、profile YES This (sub)clause is fully (100 %) included in the profile in this case no further detail is given Presence is defined in the following subclauses Partial Parts of this (sub)clause is included in the profile Constraints See Constraints/remarks are defined in the given subclause, table or

44、figure of this profile document No constraints other than given in the reference document (sub)clause, or not applicable The text defines the constraint directly, for longer text table footnotes or table notes may be used If sequences of (sub)clauses do not match the profile, then the numbers are co

45、ncatenated. EXAMPLE 1 concatenated subclauses 3.4 3.7 NO EXAMPLE 2 concatenated clauses up to the last clause Next clauses NO EXAMPLE 3 concatenated annexes up to the last annex Next annexes NO 4 Profile for power modules with batteries The general requirements for the power modules are specified in

46、 IEC 62952-1. Table 3 specifies a general power module profile selection within IEC 62952-1. BS EN 62952-2:2016 8 IEC 62952-2:2016 IEC 2016 Table 3 General power module profile selection (Sub)Clause Header Presence Constraints 1 Scope YES 2 Normative references YES 3 Terms, definitions, abbreviated

47、terms, acronyms and conventions YES 4 General requirements 4.1 General YES 4.2 Compliance YES 4.3 Design YES 4.4 Logistics 4.4.1 Storage and marking YES 4.4.2 Maintenance YES 4.4.3 Transportation in a plant YES 4.4.4 Disposal YES 4.5 Protection for explosive atmospheres YES Optional 4.5.1 General YE

48、S 4.5.2 Transportation and replacement YES 4.5.3 Battery requirements YES 4.5.4 Temperature YES 4.5.5 Air pressure YES 4.6 Harsh environment 4.6.1 General YES 4.6.2 Vibration and shock YES Optional 4.6.3 Humidity YES Optional 4.6.4 Temperature YES Optional 4.6.5 Corrosive environment YES Optional 4.

49、6.6 Air pressure YES Optional 4.7 Interchangeability 4.7.1 General YES 4.7.2 Electrical interface YES 4.7.3 Mechanical interface YES 4.8 Electrical parameters YES BS EN 62952-2:2016IEC 62952-2:2016 IEC 2016 9 Bibliography IEC 60086-1:2015, Primary batteries Part 1: General IEC 60086-2:2015, Primary batteries Part 2: Physical and electrical specifications VDI/VDE 2185 Blatt 3, available at _