EN IEC 60286-5-2018 en Packaging of components for automatic handling - Part 5 Matrix trays.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Packaging of components for automatic handlingPart 5: Matrix traysBS EN IEC 602865:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60286-5 June 2018 ICS 31.020 Supersedes EN 60286-5:2004 English Version Pac

2、kaging of components for automatic handling - Part 5: Matrix trays (IEC 60286-5:2018) Emballage de composants pour oprations automatises - Partie 5: Supports matriciels (IEC 60286-5:2018) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung - Teil 5: Flachmagazine (IEC 60286-5:201

3、8) This European Standard was approved by CENELEC on 2018-05-30. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographic

4、al references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

5、ity of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Fo

6、rmer Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Elec

7、trotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Membe

8、rs. Ref. No. EN IEC 60286-5:2018 E National forewordThis British Standard is the UK implementation of EN IEC 602865:2018. It is identical to IEC 602865:2018. It supersedes BS EN 602865:2004+A1:2009, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/4

9、0X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The Brit

10、ish Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 95883 0ICS 31.020Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 20

11、18.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 602865:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60286-5 June 2018 ICS 31.020 Supersedes EN 60286-5:2004 English Version Packaging of components for automatic handling - Part 5: Matrix tra

12、ys (IEC 60286-5:2018) Emballage de composants pour oprations automatises - Partie 5: Supports matriciels (IEC 60286-5:2018) Gurtung und Magazinierung von Bauelementen fr automatische Verarbeitung - Teil 5: Flachmagazine (IEC 60286-5:2018) This European Standard was approved by CENELEC on 2018-05-30.

13、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained

14、 on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to th

15、e CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu

16、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Elec

17、trotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60286-5:2018 E BS EN IEC 602865:2018EN IEC 6

18、0286-5:2018 (E) 2 European foreword The text of document 40/2556/CDV, future edition 3 of IEC 60286-5, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60286-5:2018. The following dates are fixe

19、d: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-02-28 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-05-30 This document supersedes EN

20、 60286-5:2004. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60286-5:2018 was app

21、roved by CENELEC as a European Standard without any modification. BS EN IEC 602865:2018 2 IEC 60286-5:2018 IEC 2018 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviated terms 7 3.1 Terms and definitions 7 3.2 Abbreviated terms . 7 4 Material . 8 4.1 Electrost

22、atic dissipative requirements . 8 4.2 Effect of properties . 8 4.3 Recycling and rigidity 8 5 Mechanical stability . 8 5.1 Loaded tray . 8 5.2 Empty tray 8 5.3 Outer edges 8 6 Tray design, dimensions and other physical properties 8 6.1 Tray design . 8 6.1.1 Number of pockets . 8 6.1.2 Orientation of

23、 pockets 8 6.1.3 Design rules for pocket density 9 6.2 Overall tray dimensions 10 6.3 Cell dimensions 10 6.4 Tray vacuum pick-up sites 11 6.4.1 Size . 11 6.4.2 Centre . 11 6.4.3 Perimeter . 11 6.5 Detail features 11 6.6 Weight 12 6.7 Movement of components . 12 6.8 Dimensional information 12 7 Polar

24、ity and orientation of components in the tray . 15 7.1 Pin one . 15 7.2 Loading . 15 8 Tray stacking . 15 8.1 Bundling . 15 8.2 Top protection . 16 8.3 Partial filling 16 8.4 Protrusion of components . 16 8.5 Stack-up . 16 8.6 Damaging of components 16 8.7 Warpage . 16 9 Missing components 16 10 Mar

25、king . 16 Annex A (informative) List of existing matrix trays with wide anticipated use in the electronic industries 17 A.1 Matrix trays (for different packages) 17 BS EN IEC 602865:2018IEC 60286-5:2018 IEC 2018 3 A.2 Matrix trays for PGA packages 25 A.2.1 Dimensional information 25 A.2.2 Variation

26、sheet PGA (pin grid array package) 28 Annex B (normative) Measurement methodology of the tray dimensions 29 B.1 General . 29 B.2 Definition of the dimensions 29 B.2.1 Outline dimensions 29 B.2.2 Tray thickness (A) 30 B.2.3 Dimensions of the stacking feature 31 B.2.4 Warpage 31 B.3 Measuring instrume

27、nt 31 B.4 Measurement conditions . 31 B.5 Measurement methodology . 31 B.5.1 Outline dimensions 31 B.5.2 Tray thickness (A) 32 B.5.3 Dimensions of the stacking feature 33 B.5.4 Warpage 33 Annex C (normative) Matrix trays General considerations for design (design value) 34 C.1 Lateral movement of lea

28、ded devices . 34 C.2 Lateral movement of un-leaded devices 34 C.3 Lead protection . 35 Figure 1 Sample of leaded packages . 11 Figure 2 Sample of grid array packages . 11 Figure 3 Tray main view . 13 Figure 4 Tray stacking details 14 Figure 5 Tray tolerances 14 Figure A.1 Thin tray . 18 Figure A.2 T

29、hick matrix 26 Figure B.1 Cross-sections of the outline dimensions 30 Figure B.2 Tray thickness 30 Figure B.3 Examples of tray warpage . 31 Figure B.4 Top view of a tray showing the measurement locations for the outline dimensions . 32 Figure B.5 Measurement locations for tray thickness 32 Figure B.

30、6 Holding position in calliper jaws for measurement 32 Figure B.7 Correction of a lift of the tray at the measurement point 32 Figure B.8 Measurement locations for the stackable design . 33 Figure B.9 Measurement points for warpage 33 Figure C.1 Lateral movement of leaded devices A to I . 34 Figure

31、C.2 Lateral movement of un-leaded devices check points A to C . 34 Figure C.3 Lateral movement of un-leaded devices check points D to F . 35 Figure C.4 Lead protection gap 35 Table 1 P and W dimension 9 Table 2 Height dimensions . 10 BS EN IEC 602865:2018 4 IEC 60286-5:2018 IEC 2018 Table 3 Notes re

32、lated to Figures 3 and 4 . 15 Table A.1 Variations 19 Table A.2 Notes related to Figures A.1 and A.2 27 Table A.3 PGA variations . 28 BS EN IEC 602865:2018IEC 60286-5:2018 IEC 2018 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING Part 5: Matrix trays FOREW

33、ORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the elec

34、trical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to tec

35、hnical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Orga

36、nization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technica

37、l committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publicat

38、ions is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their nationa

39、l and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment servic

40、es and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servan

41、ts or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication

42、, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility t

43、hat some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60286-5 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment

44、. This third edition cancels and replaces the second edition published in 2003 and Amendment 1:2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) The generic rules for the design of matrix tr

45、ays are given in this document. Newly developed trays which follow these rules will not be listed individually. Only those trays which conform to the design rules set forth herein are classified as “standard trays“ and are thus preferred for use. b) An update of the matrix trays, which do not confor

46、m to the design rules set forth herein, are considered as “non-standard trays“ and are not preferred for use, is listed in Annex A. BS EN IEC 602865:2018 6 IEC 60286-5:2018 IEC 2018 The text of this International Standard is based on the following documents: CDV Report on voting 40/2556/CDV 40/2597/

47、RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60286 series, published under the gen

48、eral title Packaging of components for automatic handling, can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific docum

49、ent. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN IEC 602865:2018IEC 60286-5:2018 IEC 2018 7 PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING Part 5: Matrix trays 1 Scope This part of IEC 60286 describes the common dimensions, tolerances and characteristics of the tray. It includes only those dimensions tha