EN IEC 62024-1-2018 en High frequency inductive components - Electrical characteristics and measuring methods - Part 1 Nanohenry range chip inductor.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06High frequency inductive components - Electrical characteristics and measuring methodsPart 1: Nanohenry range chip inductor (IEC 62024-1:2017)BS EN IEC 62024-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IE

2、C 62024-1 March 2018 ICS 29.100.10 Supersedes EN 62024-1:2008 English Version High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (IEC 62024-1:2017) Composants inductifs haute frquence - Caractristiques lectriques et mthodes

3、de mesure - Partie 1: Inductance puce de lordre du nanohenry (IEC 62024-1:2017) Induktive Hochfrequenz-Bauelemente - Elektrische Eigenschaften und Messmethoden - Teil 1: Chipinduktivitten im Nanohenry-Bereich (IEC 62024-1:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC me

4、mbers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applica

5、tion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENEL

6、EC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icel

7、and, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniqu

8、e Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62024-1:2018 E National forewordThis British Standard i

9、s the UK implementation of EN IEC 620241:2018. It is identical to IEC 620241:2017. It supersedes BS EN 620241:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/51, Transformers, inductors, magnetic components and ferrite materials.A list of org

10、anizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2

11、018ISBN 978 0 580 96180 9ICS 29.100.10Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affe

12、ctedBRITISH STANDARDBS EN IEC 620241:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62024-1 March 2018 ICS 29.100.10 Supersedes EN 62024-1:2008 English Version High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor

13、 (IEC 62024-1:2017) Composants inductifs haute frquence - Caractristiques lectriques et mthodes de mesure - Partie 1: Inductance puce de lordre du nanohenry (IEC 62024-1:2017) Induktive Hochfrequenz-Bauelemente - Elektrische Eigenschaften und Messmethoden - Teil 1: Chipinduktivitten im Nanohenry-Ber

14、eich (IEC 62024-1:2017) This European Standard was approved by CENELEC on 2018-01-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date li

15、sts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

16、under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,

17、 Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Europe

18、an Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldw

19、ide for CENELEC Members. Ref. No. EN IEC 62024-1:2018 E BS EN IEC 620241:2018EN IEC 62024-1:2018 (E) 2 European foreword The text of document 51/1187/CDV, future edition 3 of IEC 62024-1, prepared by IEC/TC 51 “Magnetic components, ferrite and magnetic powder materials“ was submitted to the IEC-CENE

20、LEC parallel vote and approved by CENELEC as EN IEC 62024-1:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-10-17 latest date by which the national standards c

21、onflicting with the document have to be withdrawn (dow) 2021-01-17 This document supersedes EN 62024-1:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such pat

22、ent rights. Endorsement notice The text of the International Standard IEC 62024-1:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 620241:2018EN IEC 62024-1:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their correspond

23、ing European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

24、ing any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Pub

25、lication Year Title EN/HD Year IEC 61249-2-7 - Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad EN 61249-2-7 - IEC 62025-1 - Hi

26、gh frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductor for use in electronic and telecommunication equipment EN 62025-1 - ISO 6353-3 - Reagents for chemical analysis; Part 3 : Specifications; Second series - - ISO 9453 - Sof

27、t solder alloys - Chemical compositions and forms EN ISO 9453 - BS EN IEC 620241:2018 2 IEC 62024-1:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Inductance, Q-factor and impedance . 6 4.1 Inductance 6 4.1.1 Measuring method . 6 4.1.2 Measuring ci

28、rcuit . 6 4.1.3 Mounting the inductor for the test 7 4.1.4 Measuring method and calculation formula 8 4.1.5 Notes on measurement 9 4.2 Quality factor 10 4.2.1 Measuring method . 10 4.2.2 Measuring circuit . 10 4.2.3 Mounting the inductor for test 10 4.2.4 Measuring methods and calculation formula 10

29、 4.2.5 Notes on measurement 11 4.3 Impedance 11 4.3.1 Measuring method . 11 4.3.2 Measuring circuit . 11 4.3.3 Mounting the inductor for test 11 4.3.4 Measuring method and calculation . 11 4.3.5 Notes on measurement 11 5 Resonance frequency 12 5.1 Self-resonance frequency . 12 5.2 Minimum output met

30、hod 12 5.2.1 General . 12 5.2.2 Measuring circuit . 12 5.2.3 Mounting the inductor for test 12 5.2.4 Measuring method and calculation formula 13 5.2.5 Note on measurement . 13 5.3 Reflection method . 13 5.3.1 General . 13 5.3.2 Measuring circuit . 14 5.3.3 Mounting the inductor for test 14 5.3.4 Mea

31、suring method . 15 5.3.5 Notes on measurement 15 5.4 Measurement by analyser . 16 5.4.1 Measurement by impedance analyser 16 5.4.2 Measurement by network analyser . 16 6 DC resistance 16 6.1 Voltage-drop method. 16 6.1.1 Measuring circuit . 16 6.1.2 Measuring method and calculation formula 17 6.2 Br

32、idge method 17 6.2.1 Measuring circuit . 17 BS EN IEC 620241:2018IEC 62024-1:2017 IEC 2017 3 6.2.2 Measuring method and calculation formula 17 6.3 Notes on measurement . 18 6.4 Measuring temperature . 18 Annex A (normative) Mounting method for a surface mounting coil 19 A.1 Overview. 19 A.2 Mounting

33、 printed-circuit board and mounting land . 19 A.3 Solder . 19 A.4 Preparation . 19 A.5 Pre-heating . 19 A.6 Soldering 19 A.7 Cleaning . 19 Figure 1 Example of circuit for vector voltage/current method 7 Figure 2 Fixture A 7 Figure 3 Fixture B 8 Figure 4 Short device shape 10 Figure 5 Example of test

34、 circuit for the minimum output method . 12 Figure 6 Self-resonance frequency test board (minimum output method) . 13 Figure 7 Example of test circuit for the reflection method . 14 Figure 8 Self-resonance frequency test board (reflection method) 15 Figure 9 Suitable test fixture for measuring self-

35、resonance frequency 16 Figure 10 Example of test circuit for voltage-drop method 17 Figure 11 Example of test circuit for bridge method 18 Table 1 Dimensions of l and d 8 Table 2 Short device dimensions and inductances . 10 BS EN IEC 620241:2018 4 IEC 62024-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHN

36、ICAL COMMISSION _ HIGH FREQUENCY INDUCTIVE COMPONENTS ELECTRICAL CHARACTERISTICS AND MEASURING METHODS Part 1: Nanohenry range chip inductor FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical commit

37、tees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical

38、Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental a

39、nd non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreeme

40、nts of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and

41、 are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote i

42、nternational uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated

43、in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All

44、users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or

45、other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publicatio

46、n. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such pa

47、tent rights. International Standard IEC 62024-1 has been prepared by IEC technical committee 51: Magnetic components, ferrite and magnetic powder materials. This third edition cancels and replaces the second edition published in 2008. This edition constitutes a technical revision. This edition inclu

48、des the following significant technical changes with respect to the previous edition: a) addition of voltage-drop method of DC resistance measuring; b) unification of technical terms. BS EN IEC 620241:2018IEC 62024-1:2017 IEC 2017 5 The text of this International Standard is based on the following d

49、ocuments: CDV Report on voting 51/1187/CDV 51/1202/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62024 series, published under the general title High frequency inductive components Electrical characteristics and measuring methods, can be found o