EN IEC 62386-333-2018 en Digital addressable lighting interface - Part 333 Particular requirements for control devices - Manual configuration (feature type 33).pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Digital addressable lighting interfacePart 333: Particular requirements for control devices - Manual configuration (feature type 33)BS EN IEC 62386333:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62386-3

2、33 June 2018 ICS 29.140.50; 29.140.99 English Version Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33) (IEC 62386-333:2018) Interface dclairage adressable numrique - Partie 333 : Exigences particulires pour les di

3、spositifs de commande - Configuration manuelle (type caractristique 33) (IEC 62386-333:2018) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 333: Besondere Anforderungen fr Eingabegerte - Manuelle Konfiguration (Gertetyp 33) (IEC 62386-333:2018) This European Standard was approved by C

4、ENELEC on 2018-05-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national stan

5、dards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own langua

6、ge and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France

7、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen

8、de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62386-333:2018 E Nation

9、al forewordThis British Standard is the UK implementation of EN IEC 62386333:2018. It is identical to IEC 62386333:2018.The UK participation in its preparation was entrusted to Technical Committee CPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committee can be obtained o

10、n request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 89949 2ICS 29.140.99; 29.140.50Complianc

11、e with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62386333:2018EUROPE

12、AN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62386-333 June 2018 ICS 29.140.50; 29.140.99 English Version Digital addressable lighting interface - Part 333: Particular requirements for control devices - Manual configuration (feature type 33) (IEC 62386-333:2018) Interface dclairage adressable

13、numrique - Partie 333 : Exigences particulires pour les dispositifs de commande - Configuration manuelle (type caractristique 33) (IEC 62386-333:2018) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 333: Besondere Anforderungen fr Eingabegerte - Manuelle Konfiguration (Gertetyp 33) (IE

14、C 62386-333:2018) This European Standard was approved by CENELEC on 2018-05-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists an

15、d bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

16、the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Eston

17、ia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Com

18、mittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide fo

19、r CENELEC Members. Ref. No. EN IEC 62386-333:2018 E BS EN IEC 62386333:2018EN IEC 62386-333:2018 (E) 2 European foreword The text of document 34C/1267/CDV, future edition 1 of IEC 62386-333, prepared by IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and approv

20、ed by CENELEC as EN IEC 62386-333:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-02-15 latest date by which the national standards conflicting with the docume

21、nt have to be withdrawn (dow) 2021-05-15 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standar

22、d IEC 62386-333:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61347 (series) NOTE Harmonized as EN 61347 (series). IEC 61347-1 NOTE Harmonized as EN 61347-

23、1. BS EN IEC 62386333:2018EN IEC 62386-333:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of

24、 this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD

25、applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62386-101 2014 Digital addressable lighting interface - Part 101: General requirements - System components EN 62386-10

26、1 2014 + A11- + A12- IEC 62386-103 2014 Digital addressable lighting interface - Part 103: General requirements - Control devices EN 62386-103 2014 + A13- + A14- 1Under preparation. Stage at the time of publication: IEC CCDV 62386-101/AMD1:2018. 2Under preparation. Stage at the time of publication:

27、EN 62386-101:2014/prA1:2017. 3Under preparation. Stage at the time of publication: IEC RFDIS 62386-103/AMD1:2018. 4Under preparation. Stage at the time of publication: EN 62386-103:2014/prA1:2017. BS EN IEC 62386333:2018This page deliberately left blank 2 IEC 62386-333:2018 IEC 2018 CONTENTS FOREWOR

28、D . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 9 5 Electrical specification . 9 6 Interface power supply 9 7 Transmission protocol structure . 9 7.1 General . 9 7.2 Frame format for event messages

29、. 9 8 Timing . 10 9 Method of operation . 10 9.1 General . 10 9.2 Feature type . 10 9.3 Events 10 9.3.1 General . 10 9.3.2 Priority use 10 9.3.3 Bus usage . 10 9.3.4 Encoding . 11 9.3.5 Event generation . 11 9.3.6 Power interruption . 12 9.3.7 Manual configuration affecting multiple variables . 12 9

30、.4 Configuring the feature . 12 9.4.1 General . 12 9.4.2 Manual capability . 12 9.4.3 Enable/disable manual configuration . 14 9.4.4 Querying any manual configuration enabled 16 9.4.5 Manual configuration behaviour . 16 10 Declaration of variables . 17 11 Definition of commands . 18 11.1 General . 1

31、8 11.2 Overview sheets . 18 11.2.1 General . 18 11.2.2 Standard commands 18 11.3 Event messages . 20 11.3.1 General . 20 11.3.2 Manual configuration event 20 11.4 Device control instructions 20 11.5 Device configuration instructions . 20 11.5.1 General . 20 11.5.2 RESET 20 11.6 Device queries 20 2 I

32、EC 62386-333:2018 IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 8 4 General . 9 4.1 General . 9 4.2 Version number 9 4.3 Insulation 9 5 Electrical specification . 9 6 Interface power supply 9 7 Transmission protocol structure . 9 7.1 Gener

33、al . 9 7.2 Frame format for event messages . 9 8 Timing . 10 9 Method of operation . 10 9.1 General . 10 9.2 Feature type . 10 9.3 Events 10 9.3.1 General . 10 9.3.2 Priority use 10 9.3.3 Bus usage . 10 9.3.4 Encoding . 11 9.3.5 Event generation . 11 9.3.6 Power interruption . 12 9.3.7 Manual config

34、uration affecting multiple variables . 12 9.4 Configuring the feature . 12 9.4.1 General . 12 9.4.2 Manual capability . 12 9.4.3 Enable/disable manual configuration . 14 9.4.4 Querying any manual configuration enabled 16 9.4.5 Manual configuration behaviour . 16 10 Declaration of variables . 17 11 D

35、efinition of commands . 18 11.1 General . 18 11.2 Overview sheets . 18 11.2.1 General . 18 11.2.2 Standard commands 18 11.3 Event messages . 20 11.3.1 General . 20 11.3.2 Manual configuration event 20 11.4 Device control instructions 20 11.5 Device configuration instructions . 20 11.5.1 General . 20

36、 11.5.2 RESET 20 11.6 Device queries 20 BS EN IEC 62386333:2018IEC 62386-333:2018 IEC 2018 3 11.7 Instance control instructions . 20 11.8 Instance configuration instructions 20 11.9 Instance queries . 20 11.10 Special commands 20 11.11 Feature configuration instructions . 20 11.11.1 General . 20 11.

37、11.2 SET MANUAL CONFIGURATION 103 (DTR0) 21 11.11.3 SET MANUAL CONFIGURATION 3xx (DTR0) 21 11.11.4 SET MANUAL CONFIGURATION FEATURE 3xx (DTR0) . 21 11.12 Feature queries. 21 11.12.1 General . 21 11.12.2 QUERY MANUAL CONFIGURATION CAPABILITY 103 . 22 11.12.3 QUERY MANUAL CONFIGURATION CAPABILITY 3xx

38、22 11.12.4 QUERY MANUAL CONFIGURATION CAPABILITY FEATURE 3xx . 22 11.12.5 QUERY MANUAL CONFIGURATION 103 22 11.12.6 QUERY MANUAL CONFIGURATION 3xx 22 11.12.7 QUERY MANUAL CONFIGURATION FEATURE 3xx 23 11.12.8 QUERY ANY MANUAL CONFIGURATION ENABLED 23 Bibliography 24 Figure 1 IEC 62386 graphical overv

39、iew 6 Table 1 24-bit event message frame encoding manual configuration 10 Table 2 Event source information manual configuration 11 Table 3 “manualCapabilityDevice” encoding . 13 Table 4 “manualCapabilityInstance103” encoding 13 Table 5 “manualConfigDevice” encoding 14 Table 6 “manualConfigInstance10

40、3” encoding . 15 Table 7 Declaration of additions and restrictions to existing device variables . 17 Table 8 Declaration of additions and restrictions to existing instance variables 18 Table 9 Additional feature commands 19 BS EN IEC 62386333:2018 4 IEC 62386-333:2018 IEC 2018 INTERNATIONAL ELECTROT

41、ECHNICAL COMMISSION _ DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 333: Particular requirements for control devices Manual configuration (feature type 33) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotec

42、hnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specification

43、s, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, g

44、overnmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisio

45、ns or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for internat

46、ional use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order

47、 to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clear

48、ly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bo

49、dies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance