EN IEC 62561-6-2018 en Lightning protection system components (LPSC) - Part 6 Requirements for lightning strike counters (LSC).pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Lightning protection system components (LPSC)Part 6: Requirements for lightning strike counters (LSC)BS EN IEC 62561-6:2018Incorporating corrigendum April 2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 625

2、61-6 March 2018 ICS 29.020; 91.120.40 Supersedes EN 62561-6:2011 English Version Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) (IEC 62561-6:2018) Composants des systmes de protection contre la foudre (CSPF) - Partie 6: Exigences pour les com

3、pteurs de coups de foudre (LSC) (IEC 62561-6:2018) Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzhler (LSC) (IEC 62561-6:2018) This European Standard was approved by CENELEC on 2018-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipula

4、te the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European

5、 Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC member

6、s are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norwa

7、y, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre:

8、 Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62561-6:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62561-6:2018, incorporating corrigendum April 2

9、018. It is identical to IEC 62561-6:2018. It supersedes BS EN 62561-6:2011, which will be withdrawn on 1 March 2021.The UK participation in its preparation was entrusted to Technical Committee GEL/81, Protection against lightning.A list of organizations represented on this committee can be obtained

10、on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 539 00795 4ICS 91.120.40; 29.020Compliance

11、with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affected31 May 2018 Implementation of CENELEC corrige

12、ndum April 2018: DOW corrected in CENELEC ForewordBRITISH STANDARDBS EN IEC 62561-6:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62561-6 March 2018 ICS 29.020; 91.120.40 Supersedes EN 62561-6:2011 English Version Lightning protection system components (LPSC) - Part 6: Requirements fo

13、r lightning strike counters (LSC) (IEC 62561-6:2018) Composants des systmes de protection contre la foudre (CSPF) - Partie 6: Exigences pour les compteurs de coups de foudre (LSC) (IEC 62561-6:2018) Blitzschutzsystembauteile (LPSC) - Teil 6: Anforderungen an Blitzzhler (LSC) (IEC 62561-6:2018) This

14、European Standard was approved by CENELEC on 2018-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refer

15、ences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

16、 CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yug

17、oslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechn

18、ical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref.

19、 No. EN IEC 62561-6:2018 E BS EN IEC 62561-6:2018EN IEC 62561-6:2018 (E) 2 European foreword The text of document 81/575/FDIS, future edition 2 of IEC 62561-6, prepared by IEC/TC 81 “Lightning protection“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62561-6:2018.

20、The following dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2018-12-01 latest date by which the nationalstandards conflicting with thedocument have to be withdrawn(dow) 2021-03-01 This d

21、ocument supersedes EN 62561-6:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC

22、 62561-6:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60060-1 NOTE Harmonized as EN 60060-1. IEC 61000-6-2 NOTE Harmonized as EN 61000-6-2. IEC 61180-1 NO

23、TE Harmonized as EN 61180-1. IEC 62305-1:2010 NOTE Harmonized as EN 62305-1:2011 (modified). IEC 62475 NOTE Harmonized as EN 62475. ISO 4892-2 NOTE Harmonized as EN ISO 4892-2. BS EN IEC 62561-6:2018EN IEC 62561-6:2018 (E) 3 Annex ZA (normative) Normative references to international publications wit

24、h their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the reference

25、d document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: w

26、ww.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-52 1996 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 1996 IEC 60068-2-75 1997 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 1997 IEC 60529 -

27、 Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 61000-6-4 - Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments EN 61000-6-4 - ISO 6988 1985 Metallic and other non-organic coatings - Sulfur dioxide test with general con

28、densation of moisture EN ISO 6988 1994 BS EN IEC 62561-6:2018 2 IEC 62561-6:2018 IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Classification . 9 5 Requirements 9 5.1 General . 9 5.2 Documentation 9 5.3 Marking . 9 5.4 Design 10 6 Test

29、s . 10 6.1 General test conditions . 10 6.1.1 General . 10 6.1.2 Impulse discharge current count for LSCs Type I . 11 6.1.3 Nominal discharge current count for LSCs Type II . 12 6.2 UV (Ultraviolet) light resistance . 13 6.2.1 General . 13 6.2.2 Pass criteria 13 6.3 Resistance tests to corrosion (fo

30、r metallic parts) . 13 6.4 Mechanical tests . 13 6.5 Index of protection confirmation (IP Code) 15 6.6 Electrical tests 15 6.6.1 General conditions for tests . 15 6.6.2 Minimum discharge current counting test Iimp min. 15 6.6.3 Threshold current test 16 6.6.4 Maximum current counting test 16 6.6.5 P

31、erformance verification test . 17 6.6.6 Multi pulse test 17 6.7 Marking test 17 7 Electromagnetic compatibility (EMC) . 18 7.1 Electromagnetic immunity . 18 7.2 Electromagnetic emission . 18 8 Structure and content of the test report 18 8.1 General . 18 8.2 Report identification 18 8.3 Specimen desc

32、ription 19 8.4 Standards and references . 19 8.5 Test procedure 19 8.6 Testing equipment description 19 8.7 Measuring instruments description 19 8.8 Results and parameters recorded . 19 8.9 Statement of pass/fail . 19 Annex A (normative) Resistance to ultraviolet light 20 A.1 General . 20 A.2 Test 2

33、0 BS EN IEC 62561-6:2018IEC 62561-6:2018 IEC 2018 3 A.3 First alternative test to Clause A.2 20 A.4 Second alternative test to Clause A.2 . 20 Annex B (normative) Conditioning/ageing for LSCs 21 B.1 General . 21 B.2 Salt mist test . 21 B.3 Humid sulphurous atmosphere test . 21 B.4 Ammonia atmosphere

34、 treatment 21 Annex C (normative) Flow chart for testing LSC 22 Bibliography 23 Figure 1 Pendulum hammer test apparatus 14 Figure C.1 Flow chart for testing of LSC 22 Table 1 Preferred parameters for impulse discharge currents counted (Iimp) . 12 Table 2 Preferred parameters for nominal discharge cu

35、rrents counted (In) 12 BS EN IEC 62561-6:2018 4 IEC 62561-6:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 6: Requirements for lightning strike counters (LSC) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide

36、organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activit

37、ies, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject de

38、alt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determine

39、d by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees

40、. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they

41、 are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication an

42、d the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not respo

43、nsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical com

44、mittees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publicat

45、ions. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of pat

46、ent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62561-6 has been prepared by IEC technical committee 81: Lightning protection. This second edition cancels and replaces the first edition published in 2011. This edition constitute

47、s a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) removal of previous classification and introduction of a simple division into Type I for impulses (direct lightning current detection) and Type II for lightning surge cu

48、rrent detection, with appropriate testing for each type; b) modification and addition of terms and definitions; c) addition of a new Annex C (tests flow chart). BS EN IEC 62561-6:2018IEC 62561-6:2018 IEC 2018 5 The text of this International Standard is based on the following documents: FDIS Report

49、on voting 81/575/FDIS 81/578/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62561 series, published under the general title Lightning protection system components (LPSC), can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until t