EN IEC 62688-2018 en Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification (IEC 62688:2017)BS EN IEC 62688:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62688 February 2018 ICS 27.160 English Version C

2、oncentrator photovoltaic (CPV) modules and assemblies - Safety qualification (IEC 62688:2017) Modules et ensembles photovoltaques concentration - Qualification de la scurit (IEC 62688:2017) Konzentrator-Photovoltaik (CPV-)Module und -Anordnungen - Sicherheitsqualifikation (IEC 62688:2017) This Europ

3、ean Standard was approved by CENELEC on 2017-10-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

4、 concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENE

5、LEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav

6、 Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical

7、Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No.

8、EN IEC 62688:2018 E National forewordThis British Standard is the UK implementation of EN IEC 62688:2018. It is identical to IEC 62688:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/82, Photovoltaic Energy Systems.A list of organizations represented on this com

9、mittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 74540 9ICS 27.16

10、0Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 62688

11、:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62688 February 2018 ICS 27.160 English Version Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification (IEC 62688:2017) Modules et ensembles photovoltaques concentration - Qualification de la scurit (IEC 62688:2017)

12、Konzentrator-Photovoltaik (CPV-)Module und -Anordnungen - Sicherheitsqualifikation (IEC 62688:2017) This European Standard was approved by CENELEC on 2017-10-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Stan

13、dard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (En

14、glish, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees

15、of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,

16、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN

17、ELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62688:2018 E BS EN IEC 62688:2018EN IEC 62688:2018 2 European foreword The text of document 82/1299/FDIS, future edition 1 of IEC 62688, prepared by IEC/TC 82 “Solar photovoltaic ener

18、gy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62688:2018. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-02 latest

19、 date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-02 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent

20、 rights. Endorsement notice The text of the International Standard IEC 62688:2017 was approved by CENELEC as a European Standard without any modification. BS EN IEC 62688:2018EN IEC 62688:2018 3 Annex ZA (normative) Normative references to international publications with their corresponding European

21、 publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amen

22、dments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Yea

23、r Title EN/HD Year - - Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests EN 13501-1:2007 +A1:2009 - IEC 60060-1 - High-voltage test techniques - Part 1: General definitions and test requirements EN 60060-1 - IEC 60065 -

24、 Audio, video and similar electronic apparatus - Safety requirements EN 60065 - IEC 60112 - Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 - IEC 60216-5 - Electrical insulating materials - Thermal endurance properties - Part 5: D

25、etermination of relative thermal endurance index (RTE) of an insulating material EN 60216-5 - IEC 60243-2 - Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage EN 60243-2 - IEC 60417-DB - Graphical symbols for use on equipment - -

26、 IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC/TR 60664-2-1 2011 Insulation coordination for equipment within low-voltage

27、 systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing - - BS EN IEC 62688:2018EN IEC 62688:2018 4 Publication Year Title EN/HD Year IEC 60664-3 2016 Insulation coordination for equipment within low-voltage system

28、s - Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 2017 IEC 60695-1-10 - Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines EN 60695-1-10 - IEC 60695-1-11 - Fire hazard testing - Part 1-11

29、: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment EN 60695-1-11 - IEC 60695-2-10 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure EN 60695-2-10 - IEC 60695-11-20 - Fire hazard testing -

30、 Part 11-20: Test flames - 500 W flame test method EN 60695-11-20 - IEC 60904-3 - Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data EN 60904-3 - IEC 60947-1 - Low-voltage switchgear and controlgear - Part 1:

31、General rules EN 60947-1 - IEC 60950-1 (mod) 2005 Information technology equipment - Safety - Part 1: General requirements EN 60950-1 +A11 +AC +A12 2006 2009 2011 2011 IEC 61032 - Protection of persons and equipment by enclosures - Probes for verification EN 61032 - IEC 61140 2016 Protection against

32、 electric shock - Common aspects for installation and equipment EN 61140 2016 IEC 61215-2 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures EN 61215-2 - IEC 61508 Series Functional safety of electrical/electronic/programmable electronic safety

33、-related systems EN 61508 Series IEC 61730-1 2016 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction EN 61730-1 2016 IEC 61730-2 2016 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing EN 61730-2 2016 IEC/TS 61836 - Solar photovoltaic

34、energy systems - Terms, definitions and symbols - - BS EN IEC 62688:2018EN IEC 62688:2018 5 Publication Year Title EN/HD Year IEC 62108 2016 Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval EN 62108 2016 IEC 62305-2 - Protection against lightning - Part

35、 2: Risk management EN 62305-2 - IEC 62305-3 - Protection against lightning - Part 3: Physical damage to structures and life hazard EN 62305-3 - IEC 62548 - Photovoltaic (PV) arrays - Design requirements - - IEC 62670-1 - Photovoltaic concentrators (CPV) - Performance testing - Part 1: Standard cond

36、itions EN 62670-1 - IEC 62790 - Junction boxes for photovoltaic modules - Safety requirements and tests EN 62790 - IEC 62852 2014 Connectors for DC-application in photovoltaic systems - Safety requirements and tests EN 62852 2015 ISO 179-1 - Plastics - Determination of Charpy impact properties - Par

37、t 1: Non-instrumented impact test EN ISO 179-1 - ISO 261 - ISO general-purpose metric screw threads - General plan - - ISO 262 - ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts - - ISO 527 Series Plastics - Determination of tensile properties EN ISO 527 Series IS

38、O 834-1 - Fire-resistance tests - Elements of building construction - Part 1: General requirements - - ISO/TR 834-3 - Fire-resistance tests - Elements of building construction - Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test - - ISO 1456 -

39、 Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium EN ISO 1456 - ISO 1461 - Hot dip galvanized coatings on fabricated iron and steel articles_- Specifications and test methods EN ISO 1461 - IS

40、O 2081 - Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel EN ISO 2081 - ISO 2093 - Electroplated coatings of tin; Specification and test methods - - BS EN IEC 62688:2018EN IEC 62688:2018 6 Publication Year Title EN/HD Year ISO 4892

41、-2 - Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps EN ISO 4892-2 - ISO 5657 - Reaction to fire tests - Ignitability of building products using a radiant heat source - - ISO 8124-1 - Safety of toys - Part 1: Safety aspects related to mechanical and physical prop

42、erties - - ENV 1187-1 to -4 Test methods for roof coverings under the influence of a thermal attack of burning brands and radiant heat ANSI/UL 790 2004 Standard for Standard Test Methods for Fire Tests of Roof Coverings - - ANSI/UL 746B - Standard for Polymeric Materials - Long Term Property Evaluat

43、ions - - ANSI/UL 746C - Standard for Polymeric Materials - Use in Electrical Equipment Evaluations - - ANSI/UL 1703 - Standard for Flat-Plate Photovoltaic Modules and Panels - - ASTM E162-13 - Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source - - ASTM D375

44、5-14 - Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress - - ASTM D257-14 - Standard Test Methods for DC Resistance or Conductance of Insulating Materials - - ASTM D1002-10 - Standard Test Method for App

45、arent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) - - BS EN IEC 62688:2018 2 IEC 62688:2017 IEC 2017 CONTENTS FOREWORD . 8 1 Scope 10 2 Normative references 10 3 Terms and definitions 13 4 Sampling . 15 5 Marking . 20 5.1 Nameplate 20 5.2

46、Hazards 21 5.2.1 High intensity light . 21 5.2.2 Field connections. 21 5.2.3 Hot surfaces 22 6 Report . 22 7 Requirements for construction Module application classes . 23 7.1 General . 23 7.2 Class II general access, hazardous voltage, current and power, double insulated/reinforced insulation. 23 7.

47、2.1 Electrical output . 23 7.2.2 Protection 23 7.2.3 Application . 24 7.3 Class 0 Restricted access, hazardous voltage, current and power basic insulation only with no protection from faults . 24 7.3.1 Electrical output . 24 7.3.2 Protection 24 7.3.3 Application . 24 7.4 Class 0-X additional fire or

48、 concentrated light hazard . 24 7.5 Class III general access limited voltage, current and power . 24 7.5.1 Electrical output . 24 7.5.2 Protection 24 7.5.3 Application . 24 7.6 Fire safety. 25 8 Construction 25 9 Modifications . 25 10 Requirements for supplied documents . 25 10.1 General . 25 10.2 F

49、ire . 25 10.3 Electrical . 25 10.4 Mechanical . 26 10.5 Temperature . 26 10.6 Field assembly 26 10.7 Component ratings 26 11 Overcurrent protection . 26 12 Metal parts 27 12.1 Combinations of metals . 27 12.2 Corrosion protection . 27 12.3 Edges . 27 13 Polymeric materials . 27 BS EN IEC 62688:2018IEC 62688:2017 IEC 2017 3 13.1 General . 27 13.1.1 Overview . 27 13.1.2 Solid insulation and cemented joints 27 13.1.3 Requirements for polymers 28 13.1.4 Operat