EN ISO 105-E07-2010 en Textiles - Tests for colour fastness - Part E07 Colour fastness to spotting Water《纺织品 色牢度试验 第E07部分 耐水斑色牢度》.pdf

1、BS EN ISO 105-E07:2010ICS 59.080.01NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDTextiles Tests forcolour fastnessPart E07: Colour fastness to spotting:Water (ISO 105-E07:2010)This British Standardwas published under theauthority of the StandardsPolicy and Str

2、ategyCommittee on 31 May 2010 BSI 2010ISBN 978 0 580 65748 1Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 105-E07:2010National forewordThis British Standard is the UK implementation of EN ISO 105-E07:2010. It supersedes BS EN ISO 105-E07:1997 which is withdrawn.The UK particip

3、ation in its preparation was entrusted to TechnicalCommittee TCI/81, Colour fastness and colour measurement of textiles.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contr

4、act. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 105-E07 April 2010 ICS 59.080.01 Supersedes EN ISO 105-E07:1997English Version Textiles - Tests for colour f

5、astness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) Textiles - Essais de solidit des coloris - Partie E07: Solidit des coloris la goutte deau (ISO 105-E07:2010) Textilien - Farbechtheitsprfungen - Teil E07: Farbechtheit gegen Flecken: Wasser (ISO 105-E07:2010) This European Sta

6、ndard was approved by CEN on 22 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

7、such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own lang

8、uage and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lit

9、huania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010

10、 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 105-E07:2010: EBS EN ISO 105-E07:2010EN ISO 105-E07:2010 (E) 3 Foreword This document (EN ISO 105-E07:2010) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in colla

11、boration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2010, and conflicting

12、national standards shall be withdrawn at the latest by October 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document sup

13、ersedes EN ISO 105-E07:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

14、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 105-E07:2010 has been approved by CEN as a EN ISO 105-E07:2010 without

15、 any modification. BS EN ISO 105-E07:2010ISO 105-E07:2010(E) ISO 2010 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried

16、 out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO

17、 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Internation

18、al Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elem

19、ents of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 105-E07 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for coloured textiles and colorants. This fourth edition cancels a

20、nd replaces the third edition (ISO 105-E07:1989), of which Clauses 2 and 5 have been technically revised and instrumental measurement added to the appropriate clauses. It also incorporates ISO 105-E07:1989/Cor.1:2002. ISO 105 consists of many parts designated by a part letter and a two-digit serial

21、number (e.g. A01), under the general title Textiles Tests for colour fastness. A complete list of these parts is given in ISO 105-A01. BS EN ISO 105-E07:2010BS EN ISO 105-E07:2010INTERNATIONAL STANDARD ISO 105-E07:2010(E) ISO 2010 All rights reserved 1Textiles Tests for colour fastness Part E07: Col

22、our fastness to spotting: Water 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to spotting by water. 2 Normative references The following referenced documents are indispensable for the application of this documen

23、t. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 105-A02, Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour ISO 105-A05, Textiles Tests for colou

24、r fastness Part A05: Instrumental assessment of change in colour for determination of grey scale rating ISO 3696, Water for analytical laboratory use Specification and test methods 3 Principle Drops of water are worked into the specimen with a glass rod, and the change in colour of the textile is as

25、sessed with the grey scale or instrumentally after 2 min and after drying. 4 Apparatus 4.1 Pipette or dropper. 4.2 Glass rod, with a rounded end. 4.3 Grey scale for assessing change in colour, complying with ISO 105-A02. 4.4 Spectrophotometer or colorimeter for assessing change in colour, complying

26、with ISO 105-A05. 5 Reagents 5.1 Grade 3 water, complying with ISO 3696. BS EN ISO 105-E07:2010ISO 105-E07:2010(E) 2 ISO 2010 All rights reserved6 Test specimen 6.1 If the textile to be tested is fabric, use a specimen measuring (40 2) mm (100 2) mm. 6.2 If the textile to be tested is yarn, knit it

27、into fabric and use a specimen measuring (40 2) mm (100 2) mm, or make a wick of parallel lengths (100 2) mm long and about (5 2) mm in diameter, tied near both ends. 6.3 If the textile to be tested is loose fibre, comb and compress enough of it to form a sheet measuring (40 2) mm (100 2) mm. 7 Proc

28、edure 7.1 Spot the specimen at room temperature with grade 3 water (5.1) so that, after working the water into the specimen with the glass rod, a spot of diameter approximately 20 mm is formed. In the case of water-repellent fabrics, the amount of water shall not exceed 0,5 ml. 7.2 After 2 min, asse

29、ss the change in colour in the periphery of the spot with the grey scale (4.3) and/or instrumentally (see 4.4). 7.3 Dry the specimen in air at room temperature and again assess the change in colour with the grey scale (4.3) and/or instrumentally (see 4.4). 8 Test report The test report shall include

30、 the following information: a) a reference to this part of ISO 105 (ISO 105-E07:2010); b) all details necessary for the identification of the sample tested; c) the numerical grey scale rating and/or instrumental assessment for the change in colour of the specimen after 2 min and after drying; d) any

31、 deviation, by agreement or otherwise, from the procedure specified. BS EN ISO 105-E07:2010ISO 105-E07:2010(E) ISO 2010 All rights reserved 3Bibliography 1 ISO 105-A01, Textiles Tests for colour fastness Part A01: General principles of testing 2 ISO 105-J01, Textiles Tests for colour fastness Part J

32、01: General principles for measurement of surface colour 3 ISO 105-J03, Textiles Tests for colour fastness Part J03: Calculation of colour differences 4 AATCC TM 104, Colorfastness to Water Spotting BS EN ISO 105-E07:2010BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 899

33、6 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendm

34、ent or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of BSI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would in

35、form the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editi

36、ons of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response

37、 to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Standards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Lib

38、rary and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all its products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with

39、standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards via British Standards

40、Online can be found at http:/ information about BSI is available on the BSI website at http:/.CopyrightCopyright subsists in all BSI publications. BSI also holds the copyright, in theUK, of the publications of the international standardization bodies. Except aspermitted under the Copyright, Designs

41、and Patents Act 1988 no extract maybe reproduced, stored in a retrieval system or transmitted in any form or by anymeans electronic, photocopying, recording or otherwise without prior writtenpermission from BSI.This does not preclude the free use, in the course of implementing the standard,of necess

42、ary details such as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then theprior written permission of BSI must be obtained.Details and advice can be obtained from the Copyright and Licensing Manager.Tel: +44 (0)20 8996 7070 Email: