1、 STD.BS1 BS EN IS0 LOS-Z3-ENGL 1978 m Lb24bb9 0709530 831 m BRITISH STANDARD Textiles - Tests for colour fastness - Part 203: Intercompatibility of basic dyes for acrylic fibres BS EN IS0 105-203:1998 The European Standard EN IS0 105203: 1998 has the status of a British Standard ICs 59.080.01: 59.08
2、0.10 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW STD-BSI BS EN IS0 1DS-ZU3-ENGL 1998 Lb24bb7 0707531 778 Amd. No. BS EN IS0 106-203:1998 Date Text affected National foreword This British Standard is the English language version of EN IS0 105203: 1998. It is identical with
3、IS0 105-203:1996. The UK participation in its preparation was entrusted by Technical Committee TCE5, Chemical properties, to Subcommittee TCI/25/-/10, Colour fastness, which has the responsibility to: - aid enquirem to understand the text; - present to the responsible internationaVEuropean committee
4、 any enquiries on the interpretation, or proposals for change, and keep the UK interests informed - monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-refer
5、ences Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement these international or European publications may be found
6、 in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index“, or by using the “Find“ facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards
7、are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN IS0 title page, the EN IS0 foreword page, the IS0 title page, page ii, pa
8、ges 1 to 3, the annex ZA page, an inside back cover and a back cover. This British Standard, having been prepared under the direction of the Sector Board for Materiais and Chemicals, was published under the authority of the Standards Board and comes into effect on 15 July 1998 O BSI 1998 ISBN O 680
9、29978 3 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IS0 105-203 March 1998 ICs 59.080.01 Descriptors: see IS0 document English version Textiles - Tests for colour fastness - Part 203: Intercompatibility of basic dyes for acrylic fibres (IS0 105-ZO3:1996) Textiles - Essais de solMite des tei
10、ntures - Partie 203: Intercompatibilit des colorants basiques pour fibres acryliques (IS0 105-203:1996) Textilien - Farbechtheitsprungen -Teil 203: Kombinierbarkeit von basischen Farbstoffen fr Acryifasem (IS0 105-203:1996) This European Standard was approved by CEN on 14 Febniaty 1998. CEN members
11、are bound to comply with the CEWCENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
12、 the Central Secretariat or to any CEN member. This European Standard exists in three offlciai versions (English, French, German). A version in any other language made by translation under aie responsibility of a CEN member into its own language and notified to the Central Secretariat has the same s
13、tatus as aie official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzedand and United Kingdom. EUROPEAN COMMEE FOR STANARDi
14、ZAON COMITE EUROPEEN DE NORMALISATION EUROPISCHES KOMITEE PUR NORMUNG Central Secretaria: rue de Stassart, 36 B-1050 BNS CD 1998 CEN All rights of exploitation in any form and by any means resewed worldwide for CEN national Members. Ref. No. EN Is0 105-203:1998 E STD-BSI BS EN IS0 LOS-ZO3-ENGL 1998
15、Lb24bb7 0707533 540 EN IS0 105-203:1998 Foreword The text of the International Standard from Technical Committee ISOTTC 38 “Textiles“ of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 248 “Textiles and textile produc
16、ts“, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 1998, and conflicting national standards shall be withdrawn at the latest by September 1998.
17、 According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Por
18、tugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard IS0 105203: 1996 has been approved by CEN as a European Standard without any modification. NOTE: Normative references to International Standards are listed in annex ZA (normative). EN
19、IS0 105-203:1998 INTERNATIONAL STANDARD IS0 105-203 First edition 1 996-09- 15 Textiles - Tests for colour fastness - Part 203: Intercompatibility of basic dyes for acrylic fibres Textiles - Essais de solidit des teintures - Partie 203: Intercompatibilit des colorants basiques pour fibres acryliques
20、 Reference number IS0 105-203:1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body
21、 interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrote
22、chnical Commission (IEC) on all matters of electrotechnical standardization. Drat International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vot
23、e. International Standard IS0 105-203 was prepared by Technical Committee ISOTTC 38, Textdes, Subcommittee SC 1, Tests for coloured textiles and colorants. IS0 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A), with publication dates between 1978 and 1985.
24、Each part contained a series of “sections”, each designated by the respective part letter and by a two-digit cena1 number (e.g. “Section A01”). These sections are now being republished as separate documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A compl
25、ete list of these parts is given in IS0 105-A01. Descriptors: telitiles, acrylic fibres, dyeing, colour fastness, dyes, tests, colour-fastness tests, compatibility ii - STD-BSI BS EN IS0 LOS-ZO3-ENGL 1998 Lb24bb 070753b 25T EN IS0 105-203:1998 Textiles - Tests for colour fastness - Part 203: Interco
26、mpatibility of basic dyes for acrylic fibres 1 Scope This International Standard specifies a method for de- termining the behaviour of a basic dye in relation to its compatibility with other basic dyes when applied to acrylic fibres in the presence of those basic dyes. - - e = - _I - 2 Normative ref
27、erence ic ic rn The following standard contains provisions which, through reference in this text, constitute provisions of this pari of IS0 105. At the time of publication, the edition indicated was valid. All standards are subject to revision, and parties to agreements based on this part of IS0 105
28、 are encouraged to investigate the possi- bility of applying the most recent edition of the stan- dard indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 3696:1987, Water fur analytical laboratory use - Specification and fest methods. 3 Princip
29、le In the dyeing of acrylic fibres with basic dyes, the classic parameters, e.g. the time of half-dyeing, of individual dyes do not give a true indication of their dyeing behaviour in admixture with other basic dyes. Since, under normal dyeing conditions, basic dyes show virtually no migration in ac
30、rylic fibres, compatibility is of major importance in selecting dye combinations with optimum, level, dyeing behaviour. Compatibility is assessed against one of two defined five-step scales: a yellow scale and a blue scale. The assessments are made using the scale showing the greatest difference in
31、hue from that of the dye under test. The compatibility value of the dye is assessed by de- termining its dyeing behaviour in combination with each of a series of reference dyes in the relevant scale. NOTE- The recommended reference dyes have been chosen because they form two series encompassing the
32、compatibility be- haviour of nearly all basic dyes recommended for wtyk fib res; the dyes in a series are spaced to produce approxi- mately equal visual effects; the corresponding reference dyes from both scales are compatible. Safety precautions NOTE - These safety precautions are for information p
33、ur- poses only. The precautions are ancillary to the test pro- cedures and are not intended to be ali-inclusive. it is the users responsibility to use safe and proper techniques in handling materials in this test method. Consult manufac- turers for specific details such as material safety data sheet
34、s and other recommendations. 4.1 Follow good laboratory practice. Wear safety glasses in all laboratory areas and a single-use dust respirator while handling powder dyes. 1 STD-BSI BS EN IS0 LOS-ZO3-ENGL 1798 w Lb24bb9 0707537 Lb Blue scale CI Basic Blue 69 CI Basic Blue 45 1 CI Basic Blue 47 200 %
35、(omf) CI Basic Blue 77 CI Basic Blue 22 200 % (omf) EN IS0 105-203:1998 0,55 1 ,o 2,7 2,o 0,6 3,O 0,6 40 12 5,O 4.2 Handle all chemicals with care. 4.3 Use chemical goggles or a face shield, imper- vious gloves and an impervious apron during handling of concentrated acetic acid. 4.4 Ensure that an e
36、yewash/safety shower is located nearby and an organic-vapour respirator with full face- piece is readily available for emergency use. 4.5 The basic dyes listed in this method belong to the following classes: we CI Basic Orange 42 CI Basic Yellow 29 CI Basic Yellow 28 CI Basic Yellow 15 CI Basic Oran
37、ge 48 CI Basic Blue 69 CI Basic Blue 45 CI Basic Blue 47 CI Basic Blue 22 CI Basic Blue 77 Class Azo-met h ine-azo Methine Monoazo Monoazo Azo Methine Anthraquinone Anthraquinone Anthraquinone Triarylmethane 4.6 Any national and local safety regulations should also be complied with. 5 Apparatus and
38、materials During the test, use only reagents of recognized ana- lytical grade and only grade 3 water as defined in IS0 3696. 5.1 Apparatus for dyeing at a 40:l 1iquor:goods ratio at the required constant temperature. 5.2 Reference dyes). The constitution of the scales, and the recommended amounts of
39、 reference dyes to be used in the test, are shown in table 1. The percentages given produce dyeings approxi- mately 1/2 of 1/1 standard depth on most acrylic fibres. NOTE- For ease of visual assessment, it is recom- mended that the dyes under test and the reference dyes be used in a concentration wh
40、ich produces approximately 1/2 of 111 standard depth when dyed on most acrylic fibres. It should be understood, however, that it is not critical that the compatibility is assessed at standard depth, since identical values are obtained at other depths and in other ratios of ref- erence and test dyes.
41、 5.3 Acetic acid, glacial. 5.4 Sodium acetate crystals (CH3COONa.3H20). 6 Procedure 6.1 Prepare 20 to 30 specimens (four to six for each dyebath), all of equal mass, each specimen consisting of one piece or skein of the acrylic fibre used for the test. 6.2 Pretreat the specimens of material to be us
42、ed in the test for 10 min at approximately 95 OC in an aqueous solution containing 1 % (omf) of glacial acetic acid (5.3) and 1 YO (omf) of sodium acetate crystals (5.4) (to give a pH-value of 4,5 k 0,2) at a 1iquor:goods ratio of 40:l. Then lightly squeeze the material out and keep it wet ready for
43、 use. Table 1 - Reference dyes Compatibility value Amount X of reference dye Yo iomf) Reference dye Yellow scale CI Basic Orange 42 CI Basic Yellow 29 (200 Yo (ornf) CI Basic Yellow 28 200 % (ornf) CI Basic Yellow 15 CI Basic Orange 48 0,45 0,25 0,15 0,75 0,65 1) For information on the source of sup
44、ply of sets of basic dyes (five blue and five yellow) and 111 standard depths, apply to the organizations listed in clause 8 of IS0 105401 : 1994, Textiles - Tests for colour fastness - Part AOI: General principles of resting. 2 STD-BSI BS EN IS0 105-ZO3-ENGL 1778 = Lb24bb7 0707538 O22 Compatibility
45、 value of yellow reference 1 ,o 2,o 3,O 40 5,o * * M Appearance of sequence of dyeings from each bath Progressively much bluer Progressively bluer On-tone Progressively yellower Progressively much yellower 6.3 Set five dyebaths, one for each of the reference dyes, at 95 OC, a 1iquor:goods ratio of 4
46、0:l and a pH- value of 4,5 k 0,2 with X % (omf) of the appropriate reference dye (blue or yellow), Y % (omf) of the dye under test, 1 % (omf) glacial acetic acid (5.3), 1 % (omf) sodium acetate crystals (5.4), where Y corresponds to the amount of dye under test required to give a dyeing approximatel
47、y 1/2 of 1/1 standard depth on the acrylic fibre chosen and X is as given in table 1. NOTE - These percentages and the 1iquor:goods ratio re- fer to the mass of an individual specimen as defined, .e. to one skein or piece, and not to the combined mass of the four to six specimens required for each d
48、yebath. 6.4 Four to six specimens of material are needed for each dyebath. Proceed with each of the prepared dye- baths as follows: Enter the first specimen into the dyebath at the re- quired temperature for the required time at this tem- perature (see note 1). Remove this specimen of material and d
49、ye the second specimen in the same way as the first. Repeat this procedure with the re- maining two to four specimens, except that the last specimen shall be dyed to complete exhaustion. NOTES 1 Acrylic fibres can vary widely in their dyeing character- istics. The test is conducted in such a manner that all avail- able dye is exhausted in approximately equal portions on to each of the five specimens used. In order to accomplish this, it may be necessary to adjust the dyeing temperature within the range 90 “C to 100 “C and/or the
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1