1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 1833-14:2010Textiles Quantitativechemical analysisPart 14: Mixtures of acetate and certainchlorofibres (method using acetic acid) (ISO1833-14:2006)BS EN ISO 1833-14:201
2、0 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO1833-14:2010. It is identical to ISO 1833-14:2006. It supersedes BS4407:1988 which will be withdrawn on publication of the otherparts of the BS EN ISO 1833 series.The UK participation in its preparation was en
3、trusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication
4、. BSI 2011ISBN 978 0 580 72135 9ICS 59.060.01; 59.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 28 February 2011.Amendments issued since publicationDate Te
5、xt affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 1833-14 October 2010 ICS 59.060.20 English Version Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) (ISO 1833-14:2006) Textiles - Analyse chimique quantitat
6、ive - Partie 14: Mlanges dactate et de certaines chlorofibres (mthode lacide actique) (ISO 1833-14:2006) Textilien - Quantitative chemische Analysen - Teil 14: Mischungen aus Acetatfasern und bestimmten Chlorfasern (Essigsure-Verfahren) (ISO 1833-14:2006) This European Standard was approved by CEN o
7、n 12 September 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards
8、 may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to th
9、e CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
10、ta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of expl
11、oitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1833-14:2010: EBS EN ISO 1833-14:2010EN ISO 1833-14:2010 (E) 3 Foreword The text of ISO 1833-14:2006 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for
12、Standardization (ISO) and has been taken over as EN ISO 1833-14:2010 by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by e
13、ndorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for ident
14、ifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germ
15、any, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1833-14:2006 has been approved by CEN as EN ISO 1833-14:2010
16、without any modification. BS EN ISO 1833-14:2010ISO 1833-14:2006(E) ISO 2006 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally
17、carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the wo
18、rk. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Inte
19、rnational Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of t
20、he elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 1833-14 was prepared by Technical Committee ISO/TC 38, Textiles. This first edition of ISO 1833-14 cancels and replaces Clause 13 of ISO 1833:1977. I
21、SO 1833:1977 will be cancelled and replaced by ISO 1833-1, ISO 1833-3, ISO 1833-4, ISO 1833-5, ISO 1833-6, ISO 1833-7, ISO 1833-8, ISO 1833-9, ISO 1833-10, ISO 1833-11, ISO 1833-12, ISO 1833-13, ISO 1833-14, ISO 1833-15, ISO 1833-16, ISO 1833-17, ISO 1833-18 and ISO 1833-19. ISO 1833 consists of the
22、 following parts, under the general title Textiles Quantitative chemical analysis: Part 1: General principles of testing Part 2: Ternary fibre mixtures Part 3: Mixtures of acetate and certain other fibres (method using acetone) Part 4: Mixtures of certain protein and certain other fibres (method usi
23、ng hypochlorite) Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) Part 8: Mixtures of acetate and triacetate fibres (method using acetone) Part 9: Mixtures of acetate and tria
24、cetate fibres (method using benzyl alcohol) Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres,
25、 certain elastanes and certain other fibres (method using dimethylformamide) Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) BS EN ISO 1833-14:2010ISO 1833-14:2006(E) iv ISO 2006 All rights reserved Part 14: Mixtures of acetate and certain c
26、hlorofibres (method using acetic acid) Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain
27、other fibres (method using sulfuric acid) Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) Part 19: Mixtures of cellulose fibres and asbestos (method by heating) Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other
28、fibres (method using cyclohexanone) The following parts are under preparation: Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetami
29、de) Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chlorate) Part 23: Mixtures of polyethylene and polypropylene (method using cyclohexanone) Part 24: Mixtures of polyester and some other fibres (method using phenol and t
30、etrachloroethane) BS EN ISO 1833-14:2010INTERNATIONAL STANDARD ISO 1833-14:2006(E) ISO 2006 All rights reserved 1Textiles Quantitative chemical analysis Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) 1 Scope This part of ISO 1833 specifies a method, using acetic aci
31、d, to determine the percentage of acetate, after removal of non-fibrous matter, in textiles made of mixtures of acetate and certain chlorofibres or after-chlorinated chlorofibres. 2 Normative references The following referenced documents are indispensable for the application of this document. For da
32、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1833-1, Textiles Quantitative chemical analysis Part 1: General principles of testing 3 Principle The acetate is dissolved out from a known dr
33、y mass of the mixture, with glacial acetic acid. The residue is collected, washed, dried and weighed; its corrected mass is expressed as a percentage of the dry mass of the mixture. The percentage of acetate is found by the difference. 4 Reagents Use the reagents described in ISO 1833-1 together wit
34、h that given in 4.1. 4.1 Glacial acetic acid, distilling at 117 C to 119 C. SAFETY PRECAUTIONS The harmful effects of this reagent shall be borne in mind, and full precautions shall be taken during use. BS EN ISO 1833-14:2010ISO 1833-14:2006(E) 2 ISO 2006 All rights reserved5 Apparatus Use the appar
35、atus described in ISO 1833-1 together with those given in 5.1 and 5.2. 5.1 Conical flask, minimum capacity 200 ml, glass-stoppered. 5.2 Mechanical shaker. 6 Test procedure Follow the general procedure given in ISO 1833-1, and then proceed as follows. To the specimen contained in the conical flask, a
36、dd 100 ml of glacial acetic acid per gram of specimen. Insert the stopper and shake the flask for 20 min on the mechanical shaker. Decant the supernatant liquid through the weighed filter crucible. Repeat the treatment twice using 100 ml of fresh reagent each time, making three extractions in all. T
37、ransfer the residue to the filter crucible, drain using suction, and rinse the crucible and residue with 100 ml of acetic acid and then three times with water. After each rinse, allow the liquor to drain through the crucible for 2 min before draining using suction. Finally, dry the crucible and resi
38、due, then cool and weigh them. 7 Calculation and expression of results Calculate the results as described in the general instructions of ISO 1833-1. The value of d is 1,00. 8 Precision On a homogeneous mixture of textile materials, the confidence limits of the results obtained by this method are not
39、 greater than 1 for the confidence level of 95 %. BS EN ISO 1833-14:2010This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British Standardsand other standards-related publications, information and services. It presents th
40、e UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendmen
41、t or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would
42、 inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest edi
43、tions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed t
44、o BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, it is BSI policy tosupply the BSI implementation of those that have been publishedas British Standards, unless otherwise requested.Information on standardsBSI provides a
45、 wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: Various BSI electronic information services are also available whichgive details on all its products and services. Tel: +44 (0)20 8996 7111
46、 Fax: +44 (0)20 8996 7048Email: BSI Subscribing Members are kept up to date with standardsdevelopments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Ad-ministration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Em
47、ail: Information regarding online access to British Standards via BritishStandards Online can be found at information about BSI is available on the BSI website at www.bsi- subsists in all BSI publications. BSI also holds the copyright,in the UK, of the publications of the international standardiza
48、tion bodies. Ex-cept as permitted under the Copyright, Designs and Patents Act 1988 no ex-tract may be reproduced, stored in a retrieval system or transmitted in anyform or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the freeuse, in the course of implementing the standard of necessary details such assymbols, and size, type or grade designations. If these details are to be usedfor any other purpose than implementation then the prior written permissionof BSI must b
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1