EN ISO 2898-1-2000 en Plastics - Plasticized Poly(Vinyl Chloride) (PVC-P) Moulding and Extrusion Materials - Part 1 Designation System and Basis for Specifications《塑料 增塑聚氯乙烯(PVC-P).pdf

1、STD-BSI BS EN IS0 2898-L-ENGL I Lb2ibbS 0879932 594 I BRITISH STANDARD Plastics - Plasticized poly(viny1 chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications The European Standrd EN IS0 2898-1:1999 has the status of a British Standard. ICs 83.0

2、80.20 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS EN IS0 I, 8 9 8-1 : 2 O00 ncorporat ing Imendment No. 1 to renumbers the BS IS0 as 3S IS0 2898- 1 :I 996 3S EN IS0 2898-1:2000) STD.BSI BS EN IS0 2878-1-ENGL 0 Lb2Libb7 0877733 V20 BS EN IS0 2898-1 :20O Committees respon

3、sible for this British Standard The preparation of this British Standard was entrusted to Technical Committee PRI/34, Vinyl materials, upon which the following bodies were represented British Plastics Federation British Rubber Manufacturers Association Ltd. Packaging and Industrial Films Association

4、 S A T R A Footwear Technology Centre This British Standard, having been prepared under the direction of the Sector Board for Materials and Chemicals, was published under the authority of the Standards Board and comes into effect on 16 December 1996 O BSI 10-2000 Amendments issued since publication

5、Amd. No. IDate 1 Comments 10726 Implementation of the European Standard. The following BSI references relate to the work on this standard: Committee reference PRY34 Draft for comment 94/342008 DC ISBN O 580 26820 9 National foreword This British Standard is the English language version of EN IS0 289

6、8-1:1999. It is identical with IS0 2898-1:1996. This British Standard is published under the direction of the Sector Board for Materials and Chemicals whose Technical Committee PRI134 has the responsibility to: - aid enquirers to understand the text; - present to the responsible international commit

7、tee any enquiries on interpretation, or proposals for change, and keep UK interests informed; - monitor related international and European developments and promulgate them in the UK. NOTE International and European Standards, as well as overseas standards, are available from Customer Senrices, BSI,

8、389 Chiswick High Road, London W4 4AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Cross-references The British Standards which implement international or European publications re

9、ferred to in this document may be found in the BSI Standards Catalogue under the section entitled ?International Standards Correspondence Index,? or by using the ?Find? facility of the BSI Standards Electronic Catalogue. Compliance with a British Standard does not of itself confer immunity from lega

10、l obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the the EN title page, the EN foreword, the IS0 title page, page ii, pages 2 to 9 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last i

11、ssued. 8 BSI 10-2000 i STD-BSI BS EN IS0 2898-1-ENGL Lb24bb9 0879935 2T3 EUROPEAN STANDARD EN IS0 2898-1 NORME EUROPENNE EUROPISCHE NORM June 1999 ICs 83.080.20 English version Plastics - Plasticized poly(viny1 chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis

12、 for specifications (IS0 2898-11996) Plastiques - Matriaux base de poly(ch1orure de vinyle) plastifi (PVC-P) pour moulage et extrusion - Partie 1: Systme de dsignation et base de Kunststoffe - Weichmacherhaltige Polyvinylchlorid (PVC-P)-Formassen - Teil 1: Bezeichnungssystem und Basis fr Spezifikati

13、onen spcification (IS0 2898-1:1996) (IS0 2898-11996) This European Standard was approved by CEN on 6 May 1999. CEN members are bound to comply with the CENICENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alte

14、ration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by trans

15、lation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the offical versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, I

16、taly, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secreatariat: rue de Stassart, 36 B-1050 Brussels O 1999 CEN All rights of exploitation in

17、any form and by any means reserved worldwide for CEN national Members. Ref. No. EN IS0 2898-1:1999 E STD-BSI OS EN IS0 2878-L-ENGL = lb24bb7 087773b L3T = EN IS0 2898-1:1999 Foreword The text of the International Standard from Technical Committee ISO/TC 61, Plastics, of the International Organizatio

18、n for Standardization OSO) has been taken over as a European Standard by Technical Committee CEN/TC 249, Plastics, the Secretariat of which is held by IBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the la

19、test by December 1999, and conflicting national standards shall be withdrawn at the latest by December 1999. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republ

20、ic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom NOTE Normative references to International Standards are listed in Annex ZA (normative). O BSI 10-2000 STD.BSI BS EN IS0 2878-1-ENGL m

21、Lb24bb7 0877737 07b m INTERNATIONAL STANDARD IS0 Third edition 1996-08-1 5 Plastics - Plasticized poly(viny1 chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specif cations Plastiques - Matriaux base de polyichlorure de vinyle) plastifi (PVC-PI pour moula

22、ge et extrusion - Partie I: Systme de dbsignation et base de spcification Reference number IS0 2898-1 :1996(E) STD*SI BS EN IS0 2898-l-ENGL LbZLibb9 0879938 TO2 = EN IS0 2898-1:lyyy Foreword IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodi

23、es (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations

24、, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated

25、 to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 2898-1 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastics. This third edition cancels

26、and replaces the second edition (IS0 2898-1:1986) and includes the following changes: the text has been brought into line with latest version of the so-called “frame text”; “tape manufacture” has been added in data block 2 as a possible application. IS0 2898 consists of the following parts, under th

27、e general title Plastics - Plasticized poly(viny1 chloride) (PVC-P) moulding and extrusion materials: - Part 1: Designation system and basis for specifications; - Part 2: Preparation of test specimens and determination of properties. 2 O BSI 10-2000 STD-BSI BS EN IS0 2898-1-ENGL m Lb2YbbS 0879939 94

28、9 EN IS0 289 b) density; c) torsional-stiffness temperature at 300 MPa; and on information about physical form, intended application andor method of processing, important properties, additives and colorants. 1.3 This part of IS0 2898 is applicable to all plasticized compositions of homopolymers and

29、copolymers that contain at least 50 % (m/m) of vinyl chloride. It is also applicable to plasticized compositions containing chlorinated poly(viny1 chloride) and to plasticized compositions containing blends of one or more of the above-mentioned polymers, provided that the total amount of these polym

30、ers represents at least 50 % (m/m) of the polymer content of the composition. This part of IS0 2898 applies to materials ready for normal use in the form of powder (dry blends), granules or pellets, unmodified or modified by colorants, additives, fillers, etc. This part of IS0 2898 does not apply to

31、 cellular plastics or to paste compositions (plastisols). 1.4 It is not intended to imply that materials having the same designation give necessarily the same performance. This part of IS0 2898 does not provide engineering data, performance data or data on processing conditions which may be required

32、 to specify a material for a particular application and/or method of processing. Identity block International Individual-item block Number Data block Data block Data block Data block Data block block 1 2 3 4 6 If such additional properties are required, they shall be determined in accordance with th

33、e test methods specified in part 2 of this International Standard, if suitable. 1.5 In order to specify a thermoplastic material for a particular application or to ensure reproducible processing, additional requirements may be given in data block 5 (see clause 3, first paragraph). 2 Normative refere

34、nces The following standards contain provisions which, through reference in this text, constitute provisions of this part of IS0 2898. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this part of IS0 2898 are en

35、couraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid International Standards. IS0 1043-1: Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special charact

36、eristics. IS0 2898-2: Plastics - Plasticized poly(viny1 chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties. 3 Designation and specification system The designation and specification system for thermoplastics is based on the follo

37、wing standardized pattern: O BSI 10-2000 3 STD-BSI BS EN IS0 2878-L-ENGL Lb2qbb7 08779LiO bbO EN IS0 2898-1:1999 The designation consists of an optional description block, reading “Thermoplastics”, and an identity block comprising the International Standard number and an individual-item block. For u

38、nambiguous coding, the individual-item block is subdivided into 5 data blocks comprising the following information: Data block 1: Data block 2: Data block 3: Data block 4: Identifkation of the plastic by its symbol PVC-P in accordance with IS0 1043-1 and information about the polymerization process

39、or the composition of the polymer. Position 1: Intended application or method of processing (see 3.2). Positions 2 to 8: Important properties, additives and supplementary information (see 3.2). Designatory properties (see 3.3). Fillers or reinforcing materials and their nominal content (not included

40、 in this part of IS0 2898). Data block 5: For the purpose of specifications, a fih data block may be added containing additional information. The first character of the individual-item block shall be a hyphen. The data blocks shall be separated from each other by commas. If a data block is not used,

41、 this shall be indicated by doubling the separation sign, i.e. by two commas (,). 3.1 Data block 1 In this data block, after the hyphen, plasticized poly(viny1 chloride) plastics are identified by the symbol PVC-P, in accordance with IS0 1043-1. 3.2 Data block 2 In this data block, information about

42、 intended application and/or method of processing is given in position 1 and information about important properties, additives and colour in positions 2 to 8. The code-letters used are specified in Table 1. If information is presented in positions 2 to 8 and no specic information is given in positio

43、n 1, the letter X shall be inserted in position 1. Table 1 - Code-letters used in data block 2 4 8 BSI 10-2000 STD-BSI BS EN IS0 2878-L-ENGL D Lb29bb7 0877993 5T7 EN IS0 2898-1:1999 3.3 Data block 3 In this data block, the Shore hardness is represented by a 2-figure code number (see 3.3.1), the rang

44、e of density by a 2-figure code number (see 3.3.2) and the range of torsional-stiffness temperature at 300 MPa by a 2-figure code-number (see 3.3.3). The code numbers are separated from each other by hyphens. If a property value falls on or near a range limit, the manufacturer shall state which rang

45、e will designate the material. If subsequent individual test values lie on, or on either side of, the limit, because of manufacturing tolerances, the designation is not affected. NOTE 1 Not all combinations of the values of designatory properties are provided in currently available polymers. 3.3.1 S

46、hore hardness The Shore A or D hardness shall be determined in accordance with IS0 2898-2. The value of the Shore hardness is represented by a 2-figure code-number as specified in Table 2. The scale used is indicated by a single code-letter (A or D) immediately preceding the code-number indicating t

47、he hardness value. 3.3.2 Density The density shall be determined in accordance with The possible values of density are divided into 17 ranges, each represented by a 2-figure code-number as specified in Table 2. 3.3.3 Torsional-stiffness temperature at 300 MPa The torsional-stiffness temperature at 3

48、00 MPa shall be determined in accordance with IS0 2898-2. The possible values of the torsional-stiffness temperature at 300 MPa are divided into 7 ranges, each represented by a 2-figure code-number as specified in Table 2. IS0 2898-2. Table 2 - Code-numbers used for designatory properties Shore hard

49、ness The Shore hardness is designated by the letter A or D ollowed by the hardness value, or example, A82 for a measured Shore A value of 82. A tolerance off 3 is permitted Use the D scale when the A scale value exceeds 85. Density Torsional-stiffness temperature at 300 MPa Code-number 15 20 25 30 35 40 45 50 55 60 65 70 76 80 85 90 95 Range gkm3 1,17 but G 1,22 1,22 but G 1,27 1,27 but 6 1,32 1,32 but 6 1,37 1,37 but 6 1,42 1,42 but 6 1,47 1,47 but 6 1,52 1,52 but 6 1,57 1,57 but 1,62 but G 1,67 1,67 but G 1,72 1,72 but 1,77 but 1,82 but 6 1,87