1、BS EN ISO4254-6:2009ICS 65.060.25; 65.060.40NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAgriculturalmachinery SafetyPart 6: Sprayers and liquid fertilizerdistributors (ISO 4254-6:2009)IncorporatingcorrigendumOctober 2010This British Standard was published un
2、der the authority of the Standards Policy and Strategy Committee on 28 February 2010 BSI 201ISBN 978 0 580 BS EN ISO 4254-6:2009National forewordThis British Standard is the UK implementation of EN ISO 4254-6:2009,The UK participation in its preparation was entrusted to Technical Committee AGE/15, E
3、quipment for crop protection and application of liquid fertilizer.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicati
4、on.Compliance with a British Standard cannot confer immunity from legal obligations.incorporating corrigendum October 2010. It supersedes BS EN 907:1997 which is withdrawn.Amendments/corrigenda issued since publicationDate Comments 28 February 2011 Implementation of CEN corrigendum October 2010: rep
5、lacement of text in EN foreword, 173592 9paragraphs 5 7EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 4254-6 September 2009 ICS 65.060.40 Supersedes EN 907:1997English Version Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009) Matriel ag
6、ricole - Scurit - Partie 6: Pulvrisateurs et distributeurs dengrais liquides (ISO 4254-6:2009) Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgerte (ISO/FDIS 4254-6:2009) This European Standard was approved by CEN on 26 August 2009. CEN members are bound to comply with the CEN/CENELEC Internal R
7、egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. T
8、his European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members ar
9、e the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switze
10、rland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. E
11、N ISO 4254-6:2009: EBS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) 3 Foreword This document (EN ISO 4254-6:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry”, the secretariat of which is held by AFNOR, in collaboration with Technical Committe
12、e ISO/TC 23 “Tractors and machinery for agriculture and forestry“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest b
13、y March 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 907:1997. This second edition cancels and re
14、places the first edition (EN 907:1997), which has been technically revised. The following major changes were introduced: revision of the requirements related to the folding/unfolding of the boom in relation to the height of the power lines (5.3.2); addition of requirements related to the draining (5
15、.4.3); addition of requirements related to the clearance zone for hitching operations (5.11); addition of a clause for safe maintenance and servicing on pumps and filters (5.12); addition of a noise clause (5.13); addition of Annexes ZA and ZB; deletion of the requirements related to the guarding of
16、 moving parts for power transmission dealt with in EN 15811: “Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool (ISO/TS 28923:2007); deletion of the requirements related to the handheld spraying devices; This document has been prepared under a mandate g
17、iven to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of the Machinery Directive 2006/42/EC. It is intended to be used together with EN ISO 4254-1:2009, Agricultural machinery Safety Part 1: General requirements (ISO 4254-1:2008) and EN 1
18、5811:2009, Agricultural machinery Guards for moving parts of power transmission Guard opening with tool (ISO/TS 28923:2007 modifi ed).For relationship with EU Directives, see informative Annex ZA and ZB, which are integral parts of this document. This standard has been developed to support the Machi
19、nery Directive 2006/42/EC. However, other directives can apply to the sprayers such as: Pressure Equipment Directives for sprayers where the functioning depends on putting pressure on the spray tank or for sprayers with piping exceeding DN 200 or exceeding the product pressure DN x PS of 2000 for DN
20、 between 25 to 200; Electromagnetic Compatibility (EMC) Directive for sprayers including electronic functions. 4 deletion of EN 1553:1999 “Agricultural machinery - Agricultural self-propelled, mounted, semi-mounted and trailed machines - Common safety requirements“ and replacement with EN ISO 4254-1
21、: “Agricultural machinery - Safety Part 1: General requirements“ (ISO 4254-1:2008). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, De
22、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) 5 Annex ZA (inf
23、ormative) Relationship between this International Standard and the Essential Requirements of EU Directive Machinery Directive 98/37/EC, amended by Directive 98/79/EC This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Asso
24、ciation to provide one means of conforming to Essential Requirements of the New Approach Directive Machinery Directive 98/37/EC, amended by Directive 98/79/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standa
25、rd in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive, except Essential Requirements 1.2.1, 1.2.7, 1.3.1 (for roll-over a
26、nd tip-over hazard for self-propelled machines), 1.3.7 (limited to moving parts for power transmission), 1.3.8 A, 1.4 (limited to moving parts for power transmission), 1.5.2, 1.5.5, 1.5.9, 1.5.11, 1.5.13 (1st paragraph), 3.2.2 (2nd par., 2nd sentence), 3.3.3 (for self-propelled machines), 3.3.5 (for
27、 self-propelled machines), 3.4.3 (operator at the driving station of a self-propelled machine), 3.4.7 for PTO drive transmission shaft, 3.4.8 (for self-propelled machines), 3.5.3 (limited to dust), 3.6.3.a) and associated EFTA regulations. WARNING Other requirements and other EU Directives may be ap
28、plicable to the product(s) falling within the scope of this standard. BS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) 6 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC This International Standard has been prepared under a manda
29、te given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive Machinery Directive 2006/42/EC. Once this standard is cited in the Official Journal of the European Union under that Directive
30、 and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive, except Essential Req
31、uirements 1.1.8 (4th par. 2ndsentence), 1.2.1, 1.3.1 (limited to roll-over and tip-over hazard for self-propelled machines), 1.3.7 (limited to moving parts for power transmission), 1.3.8.1, 1.4 (limited to moving parts for power transmission), 1.5.2, 1.5.5, 1.5.9, 1.5.11, 1.5.13 (1st paragraph), 3.3
32、.3 (for self-propelled machines), 3.3.5 (for self-propelled machines), 3.4.3 (operator at the driving station of a self-propelled machine), 3.4.7 for PTO drive transmission shaft, 3.5.3 (limited to dust), 3.6.3.1 and associated EFTA regulations. WARNING Other requirements and other EU Directives may
33、 be applicable to the product(s) falling within the scope of this standard. BS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) ISO 2011 All rights reserved iiiContents Page Foreword iv Introduction v 1 Scope . 1 2 Normative references . 2 3 Terms and definitions. 2 4 List of significant hazards . 2 5 Safet
34、y requirements and/or protective measures . 5 5.1 General. 5 5.2 Stability 5 5.3 Spray booms . 5 5.4 Spray tank 6 5.5 Pressure indicator (manometer) . 8 5.6 Protection against overpressure. 8 5.7 Fan 8 5.8 Spray liquid carrying hoses. 9 5.9 Manual spraying stop control 9 5.10 Clean water tank . 9 5.
35、11 Hitching and clearance zone . 9 5.12 Servicing and maintenance . 10 5.13 Noise reduction at the design stage. 11 6 Verification of the safety requirements and/or protective measures 11 7 Information for use . 12 7.1 Instruction handbook . 12 7.2 Marking 13 Bibliography . 15 BS EN ISO 4254-6:2009E
36、N ISO 4254-6:2009 (E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. E
37、ach member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Internati
38、onal Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standa
39、rds adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject
40、 of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 4254-6 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection. This second edition cancels and replace
41、s the first edition (ISO 4254-6:1995), which has been technically revised. ISO 4254 consists of the following parts, under the general title Agricultural machinery Safety: Part 1: General requirements Part 5: Power-driven soil-working machines Part 6: Sprayers and liquid fertilizer distributors Part
42、 7: Combine harvesters, forage harvesters and cotton harvesters Part 8: Solid fertilizer distributors Part 9: Seed drills Part 10: Rotary tedders and rakes Part 11: Pick-up balers Part 12: Rotary disc and drum mowers and flail mowers Part 2, Anhydrous ammonia applicators, has been withdrawn. Part 3,
43、 Tractors, has been cancelled and replaced by ISO 26322, Tractors for agriculture and forestry Safety Part 4, Forestry winches, has been cancelled and replaced by ISO 19472, Machinery for forestry Winches Dimensions, performance and safety BS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) ISO 2011 All rig
44、hts reserved vIntroduction The structure of safety standards in the field of machinery is as follows: a) type-A standards (basic standards) giving basic concepts, principles for design, and general aspects that can be applied to machinery; b) type-B standards (generic safety standards) dealing with
45、one safety aspect or one type of safeguards that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (e.g. safety distances, surface temperature, noise), type-B2 standards on safeguards (e.g. two-hand control devices, interlocking devices, pressure-sensitive
46、devices, guards); c) type-C standards (machinery safety standards) dealing with detailed safety requirements for a particular machine or group of machines. This document is a type-C standard as stated in ISO 12100. When requirements of this type-C standard are different from those which are stated i
47、n type-A or B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. The machinery concerned and the extent to which hazards, hazardous situ
48、ations and events are covered are indicated in the scope of this part of ISO 4254. These hazards are specific to sprayers and liquid fertilizer distributors. Significant hazards that are common to all the agricultural machines (self-propelled, mounted, semi-mounted and trailed) are dealt with in ISO
49、 4254-1. BS EN ISO 4254-6:2009EN ISO 4254-6:2009 (E) This page deliberately set blankINTERNATIONAL STANDARD ISO 2011 All rights reserved 1Agricultural machinery Safety Part 6: Sprayers and liquid fertilizer distributors 1 Scope This part of ISO 4254, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with pesticide products and liquid
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1