EN ISO 5267-1-2000 en Pulps - Determination of drainability - Part 1 Schopper-Riegler method (Incorporating Corrigendum July 2002)《纸浆 排水能力的测定 第1部分 朔珀－瑞格勒法 合并勘误表-2002年7月 ISO 5267-1-.pdf

1、BRITISH STANDARD BS EN ISO 5267-1:2001 Incorporating Technical Corrigendum No. 1 Pulps Determination of drainability Part 1: Schopper-Riegler method The European Standard EN ISO 5267-1:2000 has the status of a British Standard ICS 85.040 BS EN ISO 5267-1:2001 This British Standard, having been prepa

2、red under the direction of the Sector Policy and Strategy Committee for Materials and Chemicals, was published under the authority of the Standards Policy and Strategy Committee on 3 September 2001 BSI 1 December 2003 ISBN 0 580 38422 5 National foreword This British Standard is the official English

3、 language version of EN ISO 5267-1:2000, including Corrigendum July 2002. It is identical with ISO 5267-1:1999 and its Technical Corrigendum 2001. It supersedes BS 6035-1:1981 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PAI/11, Test methods for pa

4、per, board and pulps, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI

5、 Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

6、ts correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK intere

7、sts informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, the EN foreword page, the ISO title page, page ii, pages 1 to 8, the annex ZA page and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments 14816 Corrigendum No. 1 1 December 2003 Technical change to Clause A.2