EN ISO 5395-3-2013 en Garden equipment - Safety requirements for combustionengine- powered lawnmowers - Part 3 Ride-on lawnmowers with seated operator (Incorporates Amendment A2 20.pdf

1、BSI Standards PublicationBS EN ISO 5395-3:2013Garden equipment Safetyrequirements for combustion-engine-powered lawnmowersPart 3: Ride-on lawnmowers with seatedoperator (ISO 5395-3:2013)BS EN ISO 5395-3:2013 Incorporating corrigendum December 2015BS EN ISO 5395-3:2013 BRITISH STANDARDNational forewo

2、rdThis British Standard is the UK implementation of EN ISO 5395-3:2013. Together with BS EN ISO 5395-1:2013 and BS EN ISO 5395-2:2013 it supersedes BS EN 836:1997+A4:2011, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/20, Powered lawn and garden

3、equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by

4、 BSI Standards Limited 2015ISBN 978 0 580 92636 5ICS 65.060.70Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2013.Amendments/corrigenda issued sinc

5、e publicationDate Text affected31 December 2015 Implementation of CEN Correction Notice 25 September 2013: Title of Annex ZA modifiedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 5395-3 September 2013 ICS 65.060.70 Supersedes EN 836:1997+A4:2011English Version Garden equipment - Safety re

6、quirements for combustion-engine-powered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) Matriel de jardinage - Exigences de scurit pour les tondeuses gazon moteur combustion interne - Partie 3: Tondeuses gazon conducteur assis (ISO 5395-3:2013) Gartengerte - Sicherhei

7、tsanforderungen fr verbrennungsmotorisch angetriebene Rasenmher - Teil 3: Rasenmher mit Fahrersitz mit sitzendem Benutzer (ISO 5395-3:2013) This European Standard was approved by CEN on 19 July 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit

8、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists

9、in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standa

10、rds bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slov

11、enia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved

12、 worldwide for CEN national Members. Ref. No. EN ISO 5395-3:2013: EEN ISO 5395-3:2013 (E)3ForewordThis document (EN ISO 5395-3:2013) has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry“ in collaboration with Technical Committee CEN/TC 144 “Tractors

13、 and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withd

14、rawn at the latest by September 2014.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.This document supersedes EN 836:1997+A4:2011.This

15、document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive.For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.According to the CE

16、N-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga

17、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 5395-3:2013 has been approved by CEN as EN ISO 5395-3:2013 without any mo

18、dification.BS EN ISO 5395-3:2013EN ISO 5395-3:2013 (E)EN ISO 5395-3:2013 (E)4Annex ZA(informative)Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC on machinery amended by 2009/127/ECThis European Standard has been prepared under a mandate given to

19、 CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC amended by 2009/127/EC.Once this standard is cited in the Official Journal of the European Union under that Directive and has be

20、en implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations.

21、WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.NOTE Compliance with Part 3, together with Part 1, is necessary to achieve presumption of conformity with the Essential Requirements of Directive 2006/42/EC and associated

22、 EFTA regulations.BS EN ISO 5395-3:2013EN ISO 5395-3:2013 (E)BS EN ISO 5395-3:2013ISO 5395-3:2013(E) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Requirements for ride-on lawnmowers . 24.1 General . 24.2 Control

23、s . 24.3 Operator presence control (OPC) . 64.4 Brakes . 64.5 Guards . 94.6 Stability . 114.7 Rollover protective structure (ROPS) . 124.8 Seat belts . 124.9 Seats and foot rests 134.10 Transport position of the cutting-means assembly .144.11 Separate fan for grass collection . 144.12 Hot surfaces 1

24、54.13 Exhaust fumes 154.14 Pressurized components of hydraulic systems 154.15 Liquid spillage 154.16 Electrical system . 164.17 Electromagnetic immunity 164.18 Noise . 174.19 Vibration 175 Particular requirements for ride-on rotary lawnmowers185.1 Cutting means . 185.2 Impact of the cutting means .

25、195.3 Cutting-means enclosure 195.4 Structural integrity . 235.5 Thrown objects 235.6 Grass catchers . 246 Particular requirements for ride-on cylinder lawnmowers 246.1 Cutting-means enclosure 246.2 Throw line 276.3 Stopping time of the cutting means . 277 Information for use .277.1 Instruction hand

26、book 277.2 Markings and warnings 30Annex A (normative) Ride-on lawnmower stability test 33Annex B (normative) Determination of contact with moving power-driven components 36Annex C (informative) List of significant hazards 40Bibliography .42BS EN ISO 5395-3:2013ISO 5395-3:2013(E)ForewordISO (the Int

27、ernational Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee ha

28、s been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical

29、standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies

30、for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or a

31、ll such patent rights.ISO 5395-3 was prepared by the European Committee for Standarization (CEN) Technical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry in collaboration with ISO Technical Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee

32、SC 13, Powered lawn and garden equipment, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition of ISO 5395-3, together with ISO 5395-1 and ISO 5395-2, cancels and replaces ISO 5395:1990, which has been technically revised. These three p

33、arts also incorporate the Amendment ISO 5395:1990/Amd.1:1992.ISO 5395 consists of the following parts, under the general title Garden equipment Safety requirements for combustion-engine-powered lawnmowers: Part 1: Terminology and common tests Part 2: Pedestrian-controlled lawnmowers Part 3: Ride-on

34、lawnmowers with seated operatoriv ISO 2013 All rights reservedBS EN ISO 5395-3:2013ISO 5395-3:2013(E)IntroductionThis document is a type-C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in th

35、e scope of this document.When requirements of this type-C standard are different from those which are stated in type-A or type-B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according t

36、o the requirements of this type-C standard. ISO 2013 All rights reserved vBS EN ISO 5395-3:2013BS EN ISO 5395-3:2013Garden equipment Safety requirements for combustion-engine-powered lawnmowers Part 3: Ride-on lawnmowers with seated operator1 Scope1.1 This part of ISO 5395 specifies safety requireme

37、nts and their verification for combustion-engine-powered ride-on (seated) rotary lawnmowers and cylinder lawnmowers (hereafter named “lawnmower”), and equipped with: metallic cutting means; and/or non-metallic cutting means with one or more cutting elements pivotally mounted on a generally circular

38、drive unit, where these cutting elements rely on centrifugal force to achieve cutting, and have a kinetic energy for each single cutting element of 10 J or more.This part of ISO 5395 does not apply to: robotic and remote-controlled lawnmowers, flail mowers, grassland mowers, sickle bar mowers, towed

39、/semi-mounted grass-cutting machines, and scrub-clearing machines; cutting-means assembly when used in combination with an agricultural tractor; electrically powered and battery-powered lawnmowers.1.2 This part of ISO 5395 deals with all significant hazards, hazardous situations or events (see Annex

40、 C) relevant to lawnmowers when used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer.1.3 This part of ISO 5395 is not applicable to lawnmowers which are manufactured before the date of publication of this document.2 Normative referencesThe followin

41、g documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.IEC 61032:1997, Prot

42、ection of persons and equipment by enclosures Probes for verificationISO 3776-2:2013, Tractors and machinery for agriculture Seat belts Part 2: Anchorage strength requirementsISO 3776-3:2009, Tractors and machinery for agriculture Seat belts Part 3: Requirements for assembliesISO 5353, Earth-moving

43、machinery, and tractors and machinery for agriculture and forestry Seat index pointISO 5395-1:2013, Garden equipment Safety requirements for combustion-engine-powered lawnmowers Part 1: Terminology and common testsISO 12100:2010, Safety of machinery General principles for design Risk assessment and

44、risk reductionISO 13849-1:2006, Safety of machinery Safety-related parts of control systems Part 1: General principles for designINTERNATIONAL STANDARD ISO 5395-3:2013(E) ISO 2013 All rights reserved 1BS EN ISO 5395-3:2013ISO 5395-3:2013(E)ISO 13857:2008, Safety of machinery Safety distances to prev

45、ent hazard zones being reached by upper and lower limbsISO 14119:1998, Safety of machinery Interlocking devices associated with guards Principles for design and selectionISO 14982:1998, Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteriaISO 17398:20

46、04, Safety colours and safety signs Classification, performance and durability of safety signsISO 21299:2009, Powered ride-on turf care equipment Roll-over protective structures (ROPS) Test procedures and acceptance criteria3 Terms and definitionsFor the purposes of this document, the terms and defi

47、nitions given in ISO 12100 and ISO 5395-1 apply.4 Requirements for ride-on lawnmowers4.1 GeneralThe lawnmower shall comply with the safety requirements and/or protective measures of this clause. The lawnmower shall be marked and carry warnings according to 7.2 and shall be provided with an instructi

48、on handbook which complies with 7.1.In addition, the lawnmower shall be designed according to the principles of ISO 12100 for relevant but not significant hazards which are not dealt with by this part of ISO 5395. An audible warning device (for example, a horn) is not required.Unless otherwise state

49、d, all tests shall be carried out at an ambient temperature between 15 C and 35 C.If not otherwise specified within this part of ISO 5395, the tests may be carried out in any order and on separate machines, cutting-means enclosures, and cutting-means components.When the order in which tests should be carried out and the number of permitted machines are not defined in this part of ISO 5395, these conditions should be determined by agreement between the persons carrying out the tests and the man