1、BS EN ISO9241-307:2008ICS 13.180; 35.180NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDErgonomics of human-system interactionPart 307: Analysis and compliance testmethods for electronic visual displays(ISO 9241-307:2008)This British Standard was published under
2、 the authority of the Standards Policy and Strategy Committee on 31 January2010 BSI 2010ISBN 978 0 580 54346 3Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 9241-307:2008National forewordThis British Standard is the UK implementation of EN ISO 9241-307:2008. Together with BS EN
3、 ISO 9241-302:2008, BS EN ISO 9241-303:2008, BS EN ISO 9241-304:2008 and BS EN ISO 9241-305:2008, it supersedes BS EN ISO 13406-1:1999, BS EN ISO 13406-2:2002, BS EN 29241-3:1993, BS EN ISO 9241-7:1998 and BS EN ISO 9241-8:1998, which are withdrawn.The UK participation in its preparation was entrust
4、ed to Technical Committee PH/9, Applied ergonomics.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance w
5、ith a British Standard cannot confer immunity from legal obligations.EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 9241-307November 2008ICS 13.180; 35.180 Supersedes EN 29241-3:1993, EN ISO 13406-2:2001, ENISO 9241-7:1998 English VersionErgonomics of human-system interaction - Part 307: Anal
6、ysisand compliance test methods for electronic visual displays (ISO9241-307:2008)Ergonomie de linteraction homme-systme - Partie 307:Mthodes dessais danalyse et de conformit pour cransde visualisation lectroniques (ISO 9241-307:2008)Ergonomie der Mensch-System-Interaktion - Teil 307:Analyse- und Kon
7、formittsverfahren fr elektronischeoptische Anzeigen (ISO 9241-307:2008)This European Standard was approved by CEN on 21 March 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standa
8、rd without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other lan
9、guage made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland
10、,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE F
11、R NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2008 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 9241-307:2008: EBS EN ISO 9241-307:2008EN ISO 9241-307:2008 (E) 3 Foreword This document (EN ISO 9241-307:2008) ha
12、s been prepared by Technical Committee ISO/TC 159 “Ergonomics“ in collaboration with Technical Committee CEN/TC 122 “Ergonomics“, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorse
13、ment, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by May 2009. This document supersedes EN 29241-3:1993, EN ISO 13406-2:2001, EN ISO 9241-7:1998. Attention is drawn to the possibility that some of the elements of this document may be the subject of
14、patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
15、 Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of I
16、SO 9241-307:2008 has been approved by CEN as a EN ISO 9241-307:2008 without any modification. BS EN ISO 9241-307:2008ISO 9241-307:2008(E) ISO 2008 All rights reserved iiiContents Page Foreword. x Introduction xii 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Guiding principles
17、2 5 Compliance routes 2 5.1 CRT displays for indoor use Display laboratory method . 2 5.1.1 Intended context of use 2 Table 1 Intended context of use CRT displays 3 5.1.2 Information about the technology. 6 Table 2 Basic physical attributes of CRT visual displays. 6 5.1.3 Compliance assessment metho
18、d 6 Table 3 Viewing conditions 7 Table 4 Assessment and reporting for design viewing direction 8 Table 5 Viewing conditions 9 Table 6 Display luminance . 10 Table 7 Assessment and reporting for display luminance Artificial information 10 Table 8 Assessment and reporting for display luminance Reality
19、 information. 10 Table 9 Luminance 11 Table 10 Assessment and reporting for luminance and contrast adjustment 13 Table 11 Special physical environments 13 Table 12 Visual artefacts 14 Table 13 Assessment and reporting for luminance non-uniformity 15 Table 14 Visual artefacts 15 Table 15 Assessment a
20、nd reporting for colour non-uniformity. 16 Table 16 Visual artefacts 16 Table 17 Visual artefacts 17 Table 18 Assessment and reporting for unwanted reflections Artificial information . 19 Table 19 Assessment and reporting for unwanted reflections Reality information 19 Table 20 Visual artefacts 20 T
21、able 21 Legibility and readability. 20 Table 22 Assessment and reporting for luminance contrast Artificial information 21 Table 23 Assessment and reporting for luminance contrast Reality information. 22 Table 24 Legibility and readability. 22 BS EN ISO 9241-307:2008ISO 9241-307:2008(E) iv ISO 2008 A
22、ll rights reservedTable 25 Legibility of information coding . 26 Table 26 Assessment and reporting for luminance coding Artificial information. 26 Table 27 Legibility of information coding . 27 Table 28 Assessment and reporting for colour coding Artificial information 27 Table 29 Legibility of infor
23、mation coding . 28 Table 30 Legibility of graphics. 28 Table 31 Fidelity. 30 Table 32 Assessment and reporting for colour gamut and reference white Artificial information. 32 Table 33 Assessment and reporting for colour gamut and reference white Reality information. 33 Table 34 Fidelity. 34 Table 35
24、 Assessment and reporting for electro-optical transfer functions and grey scale Artificial information . 35 Table 36 Assessment and reporting for electro-optical transfer functions and grey scale Reality information 35 Table 37 Fidelity. 36 5.2 Emissive flat-panel LCD for indoor use Display laborato
25、ry method. 38 5.2.1 Intended context of use 38 Table 38 Intended context of use Emissive flat-panel LCD 39 Table 39 Design viewing direction range 41 5.2.2 Information about the technology. 46 Table 40 Basic physical attributes of emissive flat-panel LCD 46 5.2.3 Compliance assessment 46 Table 41 Vi
26、ewing conditions 47 Table 42 Assessment and reporting for design viewing direction. 48 Table 43 Viewing conditions 52 Table 44 Luminance 52 Table 45 Assessment and reporting for display luminance Artificial information and isotropic visual displays 53 Table 46 Assessment and reporting for display lu
27、minance Artificial information and anisotropic visual displays 53 Table 47 Assessment and reporting for display luminance Reality information and isotropic visual displays. 53 Table 48 Assessment and reporting for display luminance Reality information and anisotropic visual displays 54 Table 49 Lumi
28、nance 54 Table 50 Assessment and reporting for luminance and contrast adjustment 55 Table 51 Special physical environments 56 Table 52 Visual artefacts. 57 Table 53 Assessment and reporting for luminance non-uniformity Artificial information Isotropic visual displays 58 BS EN ISO 9241-307:2008ISO 92
29、41-307:2008(E) ISO 2008 All rights reserved vTable 54 Assessment and reporting for luminance non-uniformity Artificial information Anisotropic visual displays . 58 Table 55 Assessment and reporting for luminance non-uniformity Reality information Isotropic visual displays 59 Table 56 Assessment and
30、reporting for luminance non-uniformity Reality information Anisotropic visual displays . 59 Table 57 Visual artefacts 60 Table 58 Assessment and reporting for colour non-uniformity Artificial information Isotropic visual displays 60 Table 59 Assessment and reporting for colour non-uniformity Artific
31、ial information Anisotropic visual displays . 61 Table 60 Assessment and reporting for colour non-uniformity Reality information Isotropic visual displays 62 Table 61 Assessment and reporting for colour non-uniformity Reality information Anisotropic visual displays . 62 Table 62 Visual artefacts 63
32、Table 63 Pixel fault classification 64 Table 64 Visual artefacts 65 Table 65 Assessment and reporting for unwanted reflections Artificial information Isotropic visual displays 67 Table 66 Assessment and reporting for unwanted reflections Artificial information Anisotropic visual displays . 67 Table
33、67 Assessment and reporting for unwanted reflections Reality information Isotropic visual displays 68 Table 68 Assessment and reporting for unwanted reflections Reality information Anisotropic visual displays . 68 Table 69 Visual artefacts 69 Table 70 Legibility and readability. 70 Table 71 Assessme
34、nt and reporting for luminance contrast Artificial information Isotropic visual displays 71 Table 72 Assessment and reporting for luminance contrast Artificial information Anisotropic visual displays . 71 Table 73 Assessment and reporting for luminance contrast Reality information Isotropic visual d
35、isplays 72 Table 74 Assessment and reporting for luminance contrast Reality information Anisotropic visual displays . 72 Table 75 Legibility and readability. 73 Table 76 Legibility of information coding. 75 Table 77 Assessment and reporting for luminance coding Artificial information Isotropic visua
36、l displays 76 Table 78 Assessment and reporting for luminance coding Artificial information Anisotropic visual displays . 76 Table 79 Legibility of information coding. 77 Table 80 Assessment and reporting for colour coding Artificial information . 77 Table 81 Legibility of information coding. 78 BS
37、EN ISO 9241-307:2008ISO 9241-307:2008(E) vi ISO 2008 All rights reservedTable 82 Legibility of graphics. 78 Table 83 Fidelity. 80 Table 84 Assessment and reporting for colour gamut and reference white Artificial information. 82 Table 85 Assessment and reporting for colour gamut and reference white R
38、eality information 83 Table 86 Fidelity. 84 Table 87 Assessment and reporting for electro-optical transfer functions and grey scale Artificial information Isotropic visual displays . 85 Table 88 Assessment and reporting for electro-optical transfer functions and grey scale Artificial information Ani
39、sotropic visual displays 86 Table 89 Assessment and reporting for electro-optical transfer functions and grey scale Reality information Isotropic visual displays 86 Table 90 Assessment and reporting for electro-optical transfer functions and grey scale Reality information Anisotropic visual displays
40、 . 87 Table 91 Fidelity. 87 5.3 PDP for indoor use Display laboratory method 89 5.3.1 Intended context of use 89 Table 92 Intended context of use PDP 90 5.3.2 Information about the technology. 92 Table 93 Basic physical attributes of PDP 92 5.3.3 Compliance assessment method 93 Table 94 Viewing cond
41、itions 93 Table 95 Assessment and reporting for design viewing direction. 94 Table 96 Viewing conditions 94 Table 97 Luminance 95 Table 98 Assessment and reporting for display luminance Artificial information 95 Table 99 Assessment and reporting for display luminance Reality information. 96 Table 10
42、0 Luminance 96 Table 101 Assessment and reporting for luminance and contrast adjustment 98 Table 102 Special physical environments 99 Table 103 Visual artefacts. 99 Table 104 Assessment and reporting for luminance non-uniformity 100 Table 105 Visual artefacts. 101 Table 106 Assessment and reporting
43、for colour non-uniformity . 101 Table 107 Visual artefacts. 102 Table 108 Pixel fault classification 103 Table 109 Visual artefacts. 104 Table 110 Assessment and reporting for unwanted reflections Artificial information 106 Table 111 Assessment and reporting for unwanted reflections Reality informat
44、ion 106 Table 112 Visual artefacts. 107 Table 113 Legibility and readability. 108 BS EN ISO 9241-307:2008ISO 9241-307:2008(E) ISO 2008 All rights reserved viiTable 114 Assessment and reporting for luminance contrast Artificial information 109 Table 115 Assessment and reporting for luminance contrast
45、 Reality information. 109 Table 116 Legibility and readability. 110 Table 117 Legibility of information coding. 112 Table 118 Assessment and reporting for luminance coding Artificial information. 113 Table 119 Legibility of information coding. 113 Table 120 Assessment and reporting for colour coding
46、 Artificial information . 114 Table 121 Legibility of information coding. 114 Table 122 Legibility of graphics. 115 Table 123 Fidelity 117 Table 124 Assessment and reporting for colour gamut and reference white Artificial information 119 Table 125 Assessment and reporting for colour gamut and refere
47、nce white Reality information 120 Table 126 Fidelity 121 Table 127 Assessment and reporting for electro-optical transfer functions and grey scale Artificial information. 122 Table 128 Assessment and reporting for electro-optical transfer functions and grey scale Reality information . 123 Table 129 F
48、idelity 123 5.4 Front-screen projection visual displays with fixed resolution for indoor use Display laboratory method 125 5.4.1 Intended context of use 125 Table 130 Intended context of use Front-screen projection visual displays with fixed resolution. 126 5.4.2 Information about the technology. 129 Table 131 Basic physical attributes of front-screen projection visual displays with fixed resolution. 129 5.4.3 Compliance asses
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1