EN ISO 10077-1-2017 en Thermal performance of windows doors and shutters - Calculation of thermal transmittance - Part 1 General.pdf

1、Thermal performance of windows, doors and shutters - Calculation of thermal transmittancePart 1: General (ISO 10077-1:2017)BS EN ISO 10077-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10077-1 July 2017

2、 ICS 91.060.50; 91.120.10 Supersedes EN ISO 10077-1:2006English Version Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017) Performance thermique des fentres, portes et fermetures - Calcul du coefficient de transmission therm

3、ique - Partie 1: Gnralits (ISO 10077-1:2017)Wrmetechnisches Verhalten von Fenstern, Tren und Abschlssen - Berechnung des Wrmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO 10077-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/C

4、ENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centr

5、e or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the

6、official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherla

7、nds, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN Al

8、l rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10077-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 10077-1:2017. It is identical to ISO 10077-1:2017. It supersedes BS EN ISO 10077-1:2006 which is

9、withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540, Energy performance of materials components and buildings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all th

10、e necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91391 4ICS 91.060.50; 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations. This

11、British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 10077-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10077-1 July 2017 ICS 91.

12、060.50; 91.120.10 Supersedes EN ISO 10077-1:2006English Version Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017) Performance thermique des fentres, portes et fermetures - Calcul du coefficient de transmission thermique - P

13、artie 1: Gnralits (ISO 10077-1:2017)Wrmetechnisches Verhalten von Fenstern, Tren und Abschlssen - Berechnung des Wrmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO 10077-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC I

14、nternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to

15、any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official

16、 versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Nor

17、way, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights

18、 of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10077-1:2017 EBS EN ISO 10077-1:2017EN ISO 10777-1:2017 (E) 3 European foreword This document (EN ISO 10777-1:2017) has been prepared by Technical Committee CEN/TC 89 “Thermal performance of bu

19、ildings and building components”, the secretariat of which is held by SIS, in collaboration with Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“. This European Standard shall be given the status of a national standard, either by publication of an identica

20、l text or by endorsement, at the latest by January 2018 and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for ide

21、ntifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepar

22、ed under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF1 below), and supports essential requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context

23、 of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within the context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntar

24、y common European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. This document s

25、upersedes EN ISO 10077-1:2006. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Rep

26、ublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. References: EF1 Mandate M480, Mandate to CEN, CE

27、NELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/

28、EU) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14thDecember 2010. BS EN ISO 10077-1:2017EN ISO 10777-1:2017 (E) 4 Endorsement notice The text of ISO 10777-1:2017 has been approved by CEN as EN ISO 10777-1:2017 without any modificati

29、on. BS EN ISO 10077-1:2017This page deliberately left blank ISO 10077-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through IS

30、O technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates c

31、losely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteri

32、a needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of

33、 patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade na

34、me used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence t

35、o the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 10077-1 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building

36、 components, in collaboration with ISO Technical Committee TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This third edition cancels and repl

37、aces the second edition (ISO 10077-1:2006), of which it constitutes a minor revision. The necessary editorial revisions were made to comply with the requirements for the EPB set of standards.In addition, the following clauses and subclauses of the previous version have been revised. In Clause 6 (pre

38、vious edition), the boundary condition “determined with the glazing replaced with a material of thermal conductivity not exceeding 0,04 W/(m2K)” was deleted, because the rules are defined in EN 12412-2. In Clause 6 (previous edition), the measurement according to EN 12412-2 for the determination of

39、gand/or pwas deleted. It is not within the scope of EN 12412-2 to determine values. In Clause 6 (previous edition), the second paragraph was deleted. It is not necessary to give further possibilities. Determination of the input data in unambiguous is defined. In 5.2.2 (previous edition), the formula

40、 was deleted. Determination of Ugis according to ISO 10292.1) Formulae (1) and (2) were extended for the consideration of glazing bars. Tabulated values were added for the linear thermal transmittance of glazing bars. Status of Annex C (previous edition) was changed to normative; some values were re

41、vised to give the values to two significant figures.1) See Table C.1 for alternative regional references in line with ISO Global Relevance Policy.iv ISO 2017 All rights reservedISO 10077-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national s

42、tandards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International

43、organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for

44、its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .or

45、g/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be

46、 in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning

47、of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 10077-1 was prepared by the Euro

48、pean Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in collaboration with ISO Technical Committee TC 163, Thermal performance and energy use in the built environment, Subcommittee SC 2, Calculation methods, in accordance w

49、ith the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This third edition cancels and replaces the second edition (ISO 10077-1:2006), of which it constitutes a minor revision. The necessary editorial revisions were made to comply with the requirements for the EPB set of standards.In addition, the following clauses and subclauses of the previous version have been revised. In Clause 6 (previous edition), the boundary condition “determined with the glazing replaced with a material of thermal conductivity not