EN ISO 10088-2017 en Small craft - Permanently installed fuel systems.pdf

1、Small craft - Permanently installed fuel systems (ISO 10088:2013)BS EN ISO 10088:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10088 August 2017 ICS 47.080 Supersedes EN ISO 10088:2013English Version Smal

2、l craft - Permanently installed fuel systems (ISO 10088:2013) Petits navires - Systmes carburant installs demeure (ISO 10088:2013) Kleine Wasserfahrzeuge - Dauerhaft installierte Kraftstoffsysteme (ISO 10088:2013) This European Standard was approved by CEN on 9 July 2017. CEN members are bound to co

3、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENEL

4、EC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

5、same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

6、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 B

7、russels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10088:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 10088:2017. It is identical to ISO 10088:2013. It supersedes BS EN ISO 10088:201

8、3, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee GME/33, Small craft.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a cont

9、ract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 96502 9ICS 47.080Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the author

10、ity of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 10088:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10088 August 2017 ICS 47.080 Supersedes EN ISO 10088:2013English Version

11、 Small craft - Permanently installed fuel systems (ISO 10088:2013) Petits navires - Systmes carburant installs demeure (ISO 10088:2013) Kleine Wasserfahrzeuge - Dauerhaft installierte Kraftstoffsysteme (ISO 10088:2013) This European Standard was approved by CEN on 9 July 2017. CEN members are bound

12、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-

13、CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has

14、 the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Lux

15、embourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1

16、000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10088:2017 EBS EN ISO 10088:2017EN ISO 10088:2017 (E) 3 European foreword The text of ISO 10088:2013 has been prepared by Technical Committee ISO/TC 188 “Small c

17、raft” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 10088:2017. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting natio

18、nal standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1008

19、8:2013. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document

20、. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G

21、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of 10088:2013 has been approved by CEN as EN ISO

22、10088:2017 without any modification. BS EN ISO 10088:2017EN ISO 10088:2017 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU This European standard has been prepared under a mandate given to CEN by the European Commissi

23、on to provide one means of conforming to Essential Requirements of the New Approach Directive 2013/53/EU. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one member state, compliance with the n

24、ormative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1: Correspondence between this European Standard and Direct

25、ive 2013/53/EU Clauses/sub-clauses of this standard Essential Requirements (ERs) of EU Directive 2013/53/EU Qualifying remarks/Notes All Clauses Annex 1 A, Clause 5.2.1, Fuel system -General This Standard applies to all parts of permanently installed diesel and petrol fuel systems as installed, from

26、 the fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and outboard-powered small craft of up to 24 m hull length. This Standard does not address fuel systems for other types of diesel or petrol burning appliances. All Clauses Annex 1 A, Clause 5.2.2

27、, Fuel system Fuel tanks The clauses in this standard address fuel lines and ventilation of petrol tank compartments. The design and construction of fuel tanks is specifically addressed by EN ISO 21487. 4, 5 Annex 1, Clause 5.6.1 Fire protection - General The clauses in this standard are limited to

28、the installation of the fuel system to minimise the risk of fire. BS EN ISO 10088:2017EN ISO 10088:2017 (E) 5 4.1.7, 4.1.8, 4.2.3, 5.2.8 Annex 1 A, Clause 5.8 Discharge prevention This standard addresses the prevention of fuel overflow from vent openings and blowback of fuel through fill fittings. I

29、t does not address accidental spillage entering the environment. WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. ISO 10088:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative referen

30、ces 13 Terms and definitions . 14 General requirements . 34.1 Materials and design 34.2 Testing 44.3 Installation 45 Fuel pipes, hoses, connections and accessories . 45.1 Fuel filling lines 45.2 Vent lines and components 55.3 Fuel distribution, return and balancing lines . 55.4 Hose fittings and hos

31、e clamping 65.5 Valves and fittings. 75.6 Fuel filters . 75.7 Labelling . 7Annex A (normative) Pressure testing . 8Bibliography 9BS EN ISO 10088:2017ISO 10088:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 General requi

32、rements . 34.1 Materials and design 34.2 Testing 44.3 Installation 45 Fuel pipes, hoses, connections and accessories . 45.1 Fuel filling lines 45.2 Vent lines and components 55.3 Fuel distribution, return and balancing lines . 55.4 Hose fittings and hose clamping 65.5 Valves and fittings. 75.6 Fuel

33、filters . 75.7 Labelling . 7Annex A (normative) Pressure testing . 8Bibliography 9BS EN ISO 10088:2017ISO 10088:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Stan

34、dards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also t

35、ake part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In p

36、articular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of the elements of this

37、 document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received. www.iso.o

38、rg/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement. The committee responsible for this document is ISO/TC 188, Small craft.This fourth edition cancels and replaces the third edition (ISO 10088:2009), which has been

39、technically revised. The major changes concern 4.1.6, 4.3.2, and 5.5.4.iv ISO 2013 All rights reservedBS EN ISO 10088:2017ISO 10088:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparin

40、g International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liai

41、son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Dire

42、ctives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2. www.iso.org/directivesAttention is drawn to the possibility that some of

43、the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations

44、 received. www.iso.org/patentsAny trade name used in this document is information given for the convenience of users and does not constitute an endorsement. The committee responsible for this document is ISO/TC 188, Small craft.This fourth edition cancels and replaces the third edition (ISO 10088:20

45、09), which has been technically revised. The major changes concern 4.1.6, 4.3.2, and 5.5.4.iv ISO 2013 All rights reserved INTERNATIONAL STANDARD ISO 10088:2013(E)Small craft Permanently installed fuel systems1 ScopeThis International Standard specifies the requirements for the design, materials, co

46、nstruction, installation and testing of permanently installed fuel systems as installed for internal combustion engines.It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the fuel fill opening to the point of connection with the propulsion or auxiliary

47、 engine(s) on inboard- and outboard-powered small craft of up to 24 m hull length.Requirements for the design, materials, construction and testing of permanently installed fixed fuel tanks are given in ISO 21487.2 Normative referencesThe following referenced documents are indispensable for the appli

48、cation of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 1817, Rubber, vulcanized or thermoplastic Determination of the effect of liquidsISO 7840:2013, Small craft Fire-

49、resistant fuel hosesISO 8469:2013, Small craft Non-fire-resistant fuel hosesISO 8846, Small craft Electrical devices Protection against ignition of surrounding flammable gasesISO 10133, Small craft Electrical systems Extra-low-voltage d.c. installationsISO 11105, Small craft Ventilation of petrol engine and/or petrol tank compartmentsISO 11192, Small craft Graphical symbolsISO 13297, Small craft Electrical systems Alternating current installationsISO 21487, Small craft Permanently installed petrol and diesel fuel tanks3 Te