EN ISO 10140-1-2016 en Acoustics - Laboratory measurement of sound insulation of building elements - Part 1 Application rules for specific products《声学-建筑构件隔声1实验室测量 特定产品的应用规则(ISO 10.pdf

1、BS EN ISO 10140-1:2016Acoustics Laboratorymeasurement of soundinsulation of building elementsPart 1: Application rules for specificproducts (ISO 10140-1:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 10140-1:2016 BRITISH STANDARDNational forewordThis

2、British Standard is the UK implementation of EN ISO10140-1:2016. It supersedes BS EN ISO 10140-1:2010+A2:2014which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EH/1/6, Building acoustics.A list of organizations represented on this committee can beobtained

3、on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 88195 4ICS 91.120.20Compliance with a Bri

4、tish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 August 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NO

5、RM EN ISO 10140-1 August 2016 ICS 91.120.20 Supersedes EN ISO 10140-1:2010English Version Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products (ISO 10140-1:2016) Acoustique - Mesurage en laboratoire de lisolation acoustique des

6、 lments de construction - Partie 1: Rgles dapplication pour produits particuliers (ISO 10140-1:2016) Akustik - Messung der Schalldmmung von Bauteilen im Prfstand - Teil 1: Anwendungsregeln fr bestimmte Produkte (ISO 10140-1:2016) This European Standard was approved by CEN on 14 August 2016. CEN memb

7、ers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicati

8、on to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Managem

9、ent Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

10、Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 1

11、7, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10140-1:2016 EBS EN ISO 10140-1:2016EN ISO 10140-1:2016 (E) 3 European foreword This document (EN ISO 10140-1:2016) has been prepared by Technical Committe

12、e ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or b

13、y endorsement, at the latest by February 2017, and conflicting national standards shall be withdrawn at the latest by February 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible

14、for identifying any or all such patent rights. This document supersedes EN ISO 10140-1:2010. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,

15、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kin

16、gdom. Endorsement notice The text of ISO 10140-1:2016 has been approved by CEN as EN ISO 10140-1:2016 without any modification. BS EN ISO 10140-1:2016ISO 10140-1:2016(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 General 24 Structure of application rules for specific products 2Anne

17、x A (normative) Walls Airborne sound insulation 3Annex B (normative) Doors Airborne sound insulation 5Annex C (normative) Windows Airborne sound insulation 6Annex D (normative) Glazing Airborne sound insulation 8Annex E (normative) Small technical elements Airborne sound insulation.15Annex F (normat

18、ive) Floors Airborne and impact sound insulation .19Annex G (normative) Acoustical linings Improvement of airborne sound insulation .20Annex H (normative) Floor coverings Improvement of impact sound insulation 24Annex I (normative) Shutters Airborne sound insulation .33Annex J (normative) Joints fil

19、led with fillers or seals Sound reduction index .38Annex K (normative) Roofs, roof/ceiling systems, roof windows and skylights Rainfall sound .49Bibliography .54 ISO 2016 All rights reserved iiiContents PageBS EN ISO 10140-1:2016ISO 10140-1:2016(E)ForewordISO (the International Organization for Stan

20、dardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right

21、 to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures u

22、sed to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules

23、 of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identifi

24、ed during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on t

25、he meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/

26、TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This second edition cancels and replaces the first edition (ISO 10140-1:2010), which has been technically revised.It also incorporates the Amendments ISO 10140-1:2010/Amd 1:2012 and ISO 10140-1:2010/Amd 2:2014.ISO 10140 consists of the followin

27、g parts, under the general title Acoustics Laboratory measurement of sound insulation of building elements: Part 1: Application rules for specific products Part 2: Measurement of airborne sound insulation Part 3: Measurement of impact sound insulation Part 4: Measurement procedures and requirements

28、Part 5: Requirements for test facilities and equipmentiv ISO 2016 All rights reservedBS EN ISO 10140-1:2016ISO 10140-1:2016(E)IntroductionISO 10140 (all parts) concerns laboratory measurement of the sound insulation of building elements (see Table 1).This part of ISO 10140 specifies the application

29、rules for specific elements and products, including specific requirements for preparation, mounting, operating and test conditions. ISO 10140-2 and ISO 10140-3 contain the general procedures for airborne and impact sound insulation measurements, respectively, and refer to ISO 10140-4 and ISO 10140-5

30、 where appropriate. For elements and products without a specific application rule described in this part of ISO 10140, it is possible to apply ISO 10140-2 and ISO 10140-3. ISO 10140-4 contains basic measurement techniques and processes. ISO 10140-5 contains the requirements for test facilities and e

31、quipment. For the structure of ISO 10140 (all parts), see Table 1.ISO 10140 (all parts) was created to improve the layout for laboratory measurements, ensure consistency and simplify future changes and additions regarding mounting conditions of test elements in laboratory and field measurements. It

32、is intended for ISO 10140 (all parts) to present a well-written and arranged format for laboratory measurements.It is intended to update this part of ISO 10140 with application rules for other products. It is also intended to incorporate ISO 140-18 into ISO 10140 (all parts).Table 1 Structure and co

33、ntents of ISO 10140 (all parts)Relevant part of ISO 10140Main purpose, contents and use Detailed contentISO 10140-1 It indicates the appropriate test procedure for elements and products. For certain types of element/product, it can contain additional and more specific instructions about quantities a

34、nd test element size and about preparation, mounting and operating conditions. Where no specific details are included, the general guidelines according ISO 10140-2 and ISO 10140-3.Appropriate references to ISO 10140-2 and ISO 10140-3 and product-related, specific and additional instructions on: spec

35、ific quantities measured; size of test element; boundary and mounting conditions; conditioning, testing and operating conditions; additional specifics for test report.ISO 10140-2 It gives a complete procedure for airborne sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For pr

36、oducts without specific application rules, it is sufficiently complete and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting a

37、nd boundary conditions General measurement procedure Data processing Test report (general points)ISO 10140-3 It gives a complete procedure for impact sound insulation measurements accord-ing to ISO 10140-4 and ISO 10140-5. For products without specific application rules, it is sufficiently complete

38、and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General measurement procedure Data processing Te

39、st report (general points) ISO 2016 All rights reserved vBS EN ISO 10140-1:2016ISO 10140-1:2016(E)Table 1 (continued)Relevant part of ISO 10140Main purpose, contents and use Detailed contentISO 10140-4 It gives all the basic measurement techniques and processes for measurement according to ISO 10140

40、-2 and ISO 10140-3 or facility qualifications according to ISO 10140-5. Much of the content is implemented in software. Definitions Frequency range Microphone positions SPL measurements Averaging, space and time Correction for background noise Reverberation time measurements Loss factor measurements

41、 Low-frequency measurements Radiated sound power by velocity measurementISO 10140-5 It specifies all information needed to design, construct and qualify the laboratory facility, its additional accessories and measurement equipment (hardware).Test facilities, design criteria: volumes, dimensions; fla

42、nking transmission; laboratory loss factor; maximum achievable sound reduction index; reverberation time; influence of lack of diffusivity in the laboratory.Test openings: standard openings for walls and floors; other openings (windows, doors, small technical elements); filler walls in general.Requi

43、rements for equipment: loudspeakers, number, positions; tapping machine and other impact sources; measurement equipment.Reference constructions: basic elements for airborne and impact insulation improvement; corresponding reference performance curves.vi ISO 2016 All rights reservedBS EN ISO 10140-1:

44、2016INTERNATIONAL STANDARD ISO 10140-1:2016(E)Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products1 ScopeThis part of ISO 10140 specifies test requirements for building elements and products, including detailed requirements for pre

45、paration, mounting, operating and test conditions, as well as applicable quantities and additional test information for reporting. The general procedures for airborne and impact sound insulation measurements are given in ISO 10140-2 and ISO 10140-3, respectively.2 Normative referencesThe following d

46、ocuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 717-1:2013, Acousti

47、cs Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulationISO 717-2, Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulationISO 10140-2, Acoustics Laboratory measurement of sound insulation of building elem

48、ents Part 2: Measurement of airborne sound insulationISO 10140-3:2010, Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulationISO 10140-4:2010, Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measureme

49、nt procedures and requirementsISO 10140-5:2010, Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipmentISO 10140-5:2010/Amd 1:2014, Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment Amendment 1: Rainfall soundISO 12999-1:2014, Acoustics Determination and application of measurement uncertainties in bu