EN ISO 10140-3-2010 en Acoustics - Laboratory measurement of sound insulation of building elements - Part 3 Measurement of impact sound insulation (Incorporates Amendment A1 2015)《.pdf

1、BSI Standards PublicationBS EN ISO 10140-3:2010Acoustics Laboratorymeasurement of soundinsulation of building elementsPart 3: Measurement of impact soundinsulationBS EN ISO 10140-3:2010+A1:2015BS EN ISO 10140-3:2010+A1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementat

2、ion of EN ISO 10140-3:2010+A1:2015. It supersedes BS EN ISO 10140-3:2010, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to ISO text carry the number of the ISO amendment. For example, text altered by ISO a

3、mendment 1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport

4、to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015. Published by BSI Standards Limited 2015ISBN 978 0 580 81821 9ICS 91.120.20Compliance with a British Standard cannot confer immunity from legal obligations

5、.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2011.Amendments/corrigenda issued since publicationDate Text affected31 July 2015 Implementation of ISO amendment 1:2015 with CEN endorsement A1:2015EUROPEAN STANDARD NORME EUROPENN

6、E EUROPISCHE NORM EN ISO 10140-3 September 2010 ICS 91.120.20 Supersedes EN 20140-10:1992, EN ISO 140-1:1997, EN ISO 140-11:2005, EN ISO 140-16:2006, EN ISO 140-3:1995, EN ISO 140-6:1998, EN ISO 140-8:1997English Version Acoustics - Laboratory measurement of sound insulation of building elements - P

7、art 3: Measurement of impact sound insulation (ISO 10140-3:2010) Acoustique - Mesurage en laboratoire de lisolation acoustique des lments de construction - Partie 3: Mesurage de lisolation au bruit de choc (ISO 10140-3:2010) Akustik - Messung der Schalldmmung von Gebudeteilen im Prfstand - Teil 3: M

8、essung der Trittschalldmmung (ISO 10140-3:2010) This European Standard was approved by CEN on 14 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alter

9、ation. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tran

10、slation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Fran

11、ce, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR

12、 NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10140-3:2010: EEN ISO 10140-3:2010+A1June 2015BS EN ISO 10140-3:2010 EN ISO 10140-3:2010 (E) 3 Foreword This doc

13、ument (EN ISO 10140-3:2010) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a

14、 national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of pat

15、ent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 140-1:1997, EN ISO 140-6:1998, EN ISO 140-3:1995, EN ISO 140-11:2005, EN 20140-10:1992, EN ISO 140-16:2006, EN ISO 140-8:1997. According to the CEN/CENELEC Inte

16、rnal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxem

17、bourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10140-3:2010 has been approved by CEN as a EN ISO 10140-3:2010 without any modification. BS EN ISO 10140-3:2010+A1:2015EN ISO 10140-

18、3:2010+A1:2015 (E)EN ISO 10140-3:2010/A1:2015 (E) 3 Foreword This document (EN ISO 10140-3:2010/A1:2015) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with the Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat

19、 of which is held by AFNOR. This Amendment to the European Standard EN ISO 10140-3:2010 shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015, and conflicting national standards shall be withdrawn at the latest

20、by December 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national stan

21、dards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, L

22、uxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10140-3:2010/Amd 1:2015 has been approved by CEN as EN ISO 10140-3:2010/A1:2015 without any modification. Foreword to am

23、endment A1BS EN ISO 10140-3:2010ISO 10140-3:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv Introduction.v 1 Scope1 2 Normative references2 3 Terms and definitions .2 4 Facilities and equipment.3 5 Test procedure and evaluation 3 6 Test arrangement 5 7 Limits of performance.5 8 Pre

24、cision.5 9 Test report6 Annex A (informative) Measurement using heavy and soft impact sources 7 Annex B (informative) Form for the expression of results .10 Bibliography12 ISO 2010 All rights reservedBS EN ISO 10140-3:2010+A1:2015ISO 10140-3:2010+A1:2015 (E)iii6681214BS EN ISO 10140-3:2010ISO 10140-

25、3:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member b

26、ody interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electro

27、technical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted

28、by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

29、ights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10140-3 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics. This first edition of ISO 10140-3, together with ISO 10140-1, ISO 10140-2, ISO 10140-4 and ISO 10140-5,

30、 cancels and replaces ISO 140-1:1997, ISO 140-3:1995, ISO 140-6:1998, ISO 140-8:1997, ISO 140-10:1991, ISO 140-11:2005 and ISO 140-16:2006, which have been technically revised. It also incorporates the Amendments ISO 140-1:1997/Amd.1:2004 and ISO 140-3:1995/Amd.1:2004. ISO 10140 consists of the foll

31、owing parts, under the general title Acoustics Laboratory measurement of sound insulation of building elements: Part 1: Application rules for specific products Part 2: Measurement of airborne sound insulation Part 3: Measurement of impact sound insulation Part 4: Measurement procedures and requireme

32、nts Part 5: Requirements for test facilities and equipment BS EN ISO 10140-3:2010+A1:2015ISO 10140-3:2010+A1:2015 (E) ISO 2010 All rights reservedivBS EN ISO 10140-3:2010ISO 10140-3:2010(E) ISO 2010 All rights reserved vIntroduction ISO 10140 (all parts) concerns laboratory measurement of the sound

33、insulation of building elements (see Table 1). ISO 10140-1 specifies the application rules for specific elements and products, including specific requirements for preparation, mounting, operating and test conditions. ISO 10140-2 and this part of ISO 10140 contain the general procedures for airborne

34、and impact sound insulation measurements, respectively, and refer to ISO 10140-4 and ISO 10140-5 where appropriate. For elements and products without a specific application rule described in ISO 10140-1, it is possible to apply ISO 10140-2 and this part of ISO 10140. ISO 10140-4 contains basic measu

35、rement techniques and processes. ISO 10140-5 contains requirements for test facilities and equipment. For the structure of ISO 10140 (all parts), see Table 1. ISO 10140 (all parts) was created to improve the layout for laboratory measurements, ensure consistency and simplify future changes and addit

36、ions regarding mounting conditions of test elements in laboratory and field measurements. It is intended for ISO 10140 (all parts) to present a well-written and arranged format for laboratory measurements. It is intended to update ISO 10140-1 with application rules for other products. It is also int

37、ended to incorporate ISO 140-18 into ISO 10140 (all parts). BS EN ISO 10140-3:2010+A1:2015ISO 10140-3:2010+A1:2015 (E) ISO 2010 All rights reservedText deletedBS EN ISO 10140-3:2010ISO 10140-3:2010(E) vi ISO 2010 All rights reservedTable 1 Structure and contents of ISO 10140 (all parts) Relevant par

38、t of ISO 10140 Main purpose, contents and use Detailed content ISO 10140-1 It indicates the appropriate test procedure for elements and products. For certain types of element/product, it can contain additional and more specific instructions about quantities and test element size and about preparatio

39、n, mounting and operating conditions. Where no specific details are included, the general guidelines are according to ISO 10140-2 and ISO 10140-3. Appropriate references to ISO 10140-2 and ISO 10140-3 and product-related, specific and additional instructions on: specific quantities measured; size of

40、 test element; boundary and mounting conditions; conditioning, testing and operating conditions; additional specifics for test report. ISO 10140-2 It gives a complete procedure for airborne sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For products without specific applicat

41、ion rules, it is sufficiently complete and general for the execution of measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General m

42、easurement procedure Data processing Test report (general points) ISO 10140-3 It gives a complete procedure for impact sound insulation measurements according to ISO 10140-4 and ISO 10140-5. For products without specific application rules, it is sufficiently complete and general for the execution of

43、 measurements. However, for products with specific application rules, measurements are carried out according to ISO 10140-1, if available. Definitions of main quantities measured General mounting and boundary conditions General measurement procedure Data processing Test report (general points) ISO 1

44、0140-4 It gives all the basic measurement techniques and processes for measurement according to ISO 10140-2 and ISO 10140-3 or facility qualifications according to ISO 10140-5. Much of the content is implemented in software. Definitions Frequency range Microphone positions SPL measurements Averaging

45、, space and time Correction for background noise Reverberation time measurements Loss factor measurements Low-frequency measurements Radiated sound power by velocity measurement ISO 10140-5 It specifies all information needed to design, construct and qualify the laboratory facility, its additional a

46、ccessories and measurement equipment (hardware). Test facilities, design criteria: volumes, dimensions; flanking transmission; laboratory loss factor; maximum achievable sound reduction index; reverberation time; influence of lack of diffusivity in the laboratory. Test openings: standard openings fo

47、r walls and floors; other openings (windows, doors, small technical elements); filler walls in general. Requirements for equipment: loudspeakers, number, positions; tapping machine and other impact sources; measurement equipment. Reference constructions: basic elements for airborne and impact insula

48、tion improvement; corresponding reference performance curves. BS EN ISO 10140-3:2010+A1:2015ISO 10140-3:2010+A1:2015 (E) ISO 2010 All rights reservedviBS EN ISO 10140-3:2010INTERNATIONAL STANDARD ISO 10140-3:2010(E) ISO 2010 All rights reserved 1Acoustics Laboratory measurement of sound insulation o

49、f building elements Part 3: Measurement of impact sound insulation 1 Scope This part of ISO 10140 specifies laboratory methods for measuring the impact sound insulation of floor assemblies. The test results can be used to compare the sound insulation properties of building elements, classify elements according to their sound insulation capabilities, help design building products which require certain acoustic properties and estimate the in sit