EN ISO 10211-2017 en Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations.pdf

1、Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculationsBS EN ISO 10211:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10211 July 2017 ICS 91.120.10 Supersedes

2、 EN ISO 10211:2007English Version Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017) Ponts thermiques dans les btiments - Flux thermiques et tempratures superficielles - Calculs dtaills (ISO 10211:2017) Wrmebrcken im Hochbau - Wrme

3、strme und Oberflchentemperaturen - Detaillierte Berechnungen (ISO 10211:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nat

4、ional standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A ve

5、rsion in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus,

6、 Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and Unite

7、d Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN I

8、SO 10211:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 10211:2017. It supersedes BS EN ISO 10211:2007, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building performance - Moisture.A list of organizations re

9、presented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0

10、 580 88083 4ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH S

11、TANDARDBS EN ISO 10211:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10211 July 2017 ICS 91.120.10 Supersedes EN ISO 10211:2007English Version Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017) Ponts thermiques dans

12、les btiments - Flux thermiques et tempratures superficielles - Calculs dtaills (ISO 10211:2017) Wrmebrcken im Hochbau - Wrmestrme und Oberflchentemperaturen - Detaillierte Berechnungen (ISO 10211:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply wi

13、th the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Mana

14、gement Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same st

15、atus as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal

16、ta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

17、 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10211:2017 EBS EN ISO 10211:2017EN ISO 10211:2017 (E) 2 European foreword This document (EN ISO 10211:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal perf

18、ormance and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of a

19、n identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsib

20、le for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document is part of the set of standards and accompanying technical reports on the energy performance of buildings a

21、nd has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF3 below). Directive 2010/31/EU recasting the Directive 2002/91/EC on energy performance of buildings (EPBD, EF4) promotes the improvement of the energy

22、 performance of buildings within the European Union, taking into account all types of energy uses (heating, lighting, cooling, air conditioning, ventilation) and outdoor climatic and local conditions, as well as indoor climate requirements and cost effectiveness (Article 1). The directive requires M

23、ember States to adopt measures and tools to achieve the prudent and rational use of energy resources. In order to achieve those goals, the EPBD requires increasing energy efficiency and the enhanced use of renewable energies in both new and existing buildings. One tool for this is the application by

24、 Member States of minimum requirements on the energy performance of new buildings and for existing buildings that are subject to major renovation, as well as for minimum performance requirements for the building envelope if energy-relevant parts are replaced or retrofitted. Other tools are energy ce

25、rtification of buildings, inspection of boilers and air-conditioning systems. The use of European standards increases the accessibility, transparency and objectivity of the energy performance assessment in the Member States facilitating the comparison of best practices and supporting the internal ma

26、rket for construction products. The use of EPB standards for calculating energy performance, as well as for energy performance certification and the inspection of heating systems and boilers, ventilation and air-conditioning systems will reduce costs compared to developing different standards at nat

27、ional level. The first mandate to CEN to develop a set of CEN EPBD standards (M/343, EF1), to support the first edition of the EPBD (EF2) resulted in the successful publication of all EPBD related CEN standards in 2007-2008. Mandate M/480 was issued to review the mandate M/343 as the recast of the E

28、PBD raised the need to revisit the standards and reformulate and add standards so that they become on the one hand unambiguous and compatible, and on the other hand a clear and explicit overview of the choices, BS EN ISO 10211:2017EN ISO 10211:2017 (E) 3 boundary conditions and input data that need

29、to be defined at national or regional level. Such national or regional choices remain necessary, due to differences in climate, culture and building tradition, policy and legal frameworks. Consequently, the set of CEN EPBD standards published in 2007-2008 had to be improved and expanded on the basis

30、 of the recast of the EPBD. The EPB standards are flexible enough to allow for necessary national and regional differentiation and facilitate Member States implementation and the setting of requirements by the Member States. Further target groups are users of the voluntary common European Union cert

31、ification scheme for the energy performance of non-residential buildings (EPBD article 11.9) and any other regional (e.g. pan European) parties wanting to motivate their assumptions by classifying the building energy performance for a dedicated building stock. This document supersedes EN ISO 10211:2

32、007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France

33、, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. References: EF1 EPBD, Directive 2002/91/EC of the European Parliament and

34、of the Council of 16 December 2002 on the energy performance of buildings EF2 EPBD Mandate M/343, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and estimating the environmental impact, in ac

35、cordance with the terms set forth in Directive 2002/91/EC , 30 January 2004 EF3 Mandate M/480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoting the energy efficiency of buildings,

36、 in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU), 14 December 2010 EF4 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU). 14 December 2010 Endorsement notice The text of ISO 10211:2017 has been approv

37、ed by CEN as EN ISO 10211:2017 without any modification. BS EN ISO 10211:2017This page deliberately left blank ISO 10211:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and subscripts . 74.1 Symbols . 74.2 Subscripts 75 Description of the metho

38、d 85.1 Output . 85.2 General description . 86 Output data and input data . 86.1 Output data 86.2 Calculation time intervals 96.3 Input data 97 Modelling of the construction . 97.1 Dimension systems . 97.2 Rules for modelling . 97.2.1 General 97.2.2 Cut-off planes for a 3-D geometrical model for calc

39、ulation of total heat flow and/or surface temperatures . 97.2.3 Cut-off planes for a 2-D geometrical model .117.2.4 Cut-off planes in the ground . 127.2.5 Periodic heat flows via the ground 137.2.6 Adjustments to dimensions . 137.2.7 Auxiliary planes .157.2.8 Quasi-homogeneous layers and materials 1

40、57.3 Conditions for simplifying the geometrical model .157.3.1 General. 157.3.2 Conditions for adjusting dimensions to simplify the geometrical model 167.3.3 Conditions for using quasi-homogeneous material layers to simplify the geometrical model .178 Input data specifications .208.1 General 208.2 T

41、hermal conductivities of materials . 218.3 Surface resistances . 218.4 Boundary temperatures . 218.5 Thermal conductivity of quasi-homogeneous layers 218.6 Equivalent thermal conductivity of air cavities .218.7 Determining the temperature in an adjacent unheated room 229 Calculation method .229.1 So

42、lution technique 229.2 Calculation rules . 229.2.1 Heat flows between material cells and adjacent environment .229.2.2 Heat flows at cut-off planes . 229.2.3 Solution of the formulae . 229.2.4 Calculation of the temperature distribution .2310 Determination of thermal coupling coefficients and heat f

43、low rate from 3-D calculations 2310.1 Two boundary temperatures, unpartitioned model 2310.2 Two boundary temperatures, partitioned model 23 ISO 2017 All rights reserved iiiContents PageISO 10211:2017(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols a

44、nd subscripts . 74.1 Symbols . 74.2 Subscripts 75 Description of the method 85.1 Output . 85.2 General description . 86 Output data and input data . 86.1 Output data 86.2 Calculation time intervals 96.3 Input data 97 Modelling of the construction . 97.1 Dimension systems . 97.2 Rules for modelling .

45、 97.2.1 General 97.2.2 Cut-off planes for a 3-D geometrical model for calculation of total heat flow and/or surface temperatures . 97.2.3 Cut-off planes for a 2-D geometrical model .117.2.4 Cut-off planes in the ground . 127.2.5 Periodic heat flows via the ground 137.2.6 Adjustments to dimensions .

46、137.2.7 Auxiliary planes .157.2.8 Quasi-homogeneous layers and materials 157.3 Conditions for simplifying the geometrical model .157.3.1 General. 157.3.2 Conditions for adjusting dimensions to simplify the geometrical model 167.3.3 Conditions for using quasi-homogeneous material layers to simplify t

47、he geometrical model .178 Input data specifications .208.1 General 208.2 Thermal conductivities of materials . 218.3 Surface resistances . 218.4 Boundary temperatures . 218.5 Thermal conductivity of quasi-homogeneous layers 218.6 Equivalent thermal conductivity of air cavities .218.7 Determining the

48、 temperature in an adjacent unheated room 229 Calculation method .229.1 Solution technique 229.2 Calculation rules . 229.2.1 Heat flows between material cells and adjacent environment .229.2.2 Heat flows at cut-off planes . 229.2.3 Solution of the formulae . 229.2.4 Calculation of the temperature di

49、stribution .2310 Determination of thermal coupling coefficients and heat flow rate from 3-D calculations 2310.1 Two boundary temperatures, unpartitioned model 2310.2 Two boundary temperatures, partitioned model 23 ISO 2017 All rights reserved iiiContents PageBS EN ISO 10211:2017ISO 10211:2017(E)10.3 More than two boundary temperatures . 2411 Calculations using linear and point thermal transmittances from 3-D calculations .2511.1 Calculation of thermal coupling coefficient 2511.2 Calculation of linear and point thermal transmittances 25