EN ISO 10511-2012 en Prevailing Torque Type Hexagon Thin Nuts (with Non-Metallic Insert)《的转矩型六角薄螺母(非金属插入)》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10511:2012Prevailing torque type hexagon thin nuts (with non-metallic insert) BS EN ISO 10511:2012 BRITISH STANDARDNational forewordThis British Standard is the UK impl

2、ementation of EN ISO10511:2012. It supersedes BS EN ISO 10511:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does no

3、t purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77986 2ICS 21.060.20Compliance with a British Standard cannot confer immunity fromlegal oblig

4、ations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10511 December 2012 ICS 21.060.20 Supersedes EN ISO 10511:1997

5、English Version Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) crous hexagonaux bas autofreins ( anneau non mtallique) (ISO 10511:2012) Sechskantmuttern mit Klemmteil (mit nichtmetallischem Einsatz), niedrige Form (ISO 10511:2012) This European Standard was appr

6、oved by CEN on 3 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa

7、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language

8、 and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu

9、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Manage

10、ment Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10511:2012: EBS EN ISO 10511:2012EN ISO 10511:2012 (E) 3 Foreword This document (EN ISO 10511:2012) has been prepared by Techni

11、cal Committee ISO/TC 2 “Fasteners“ in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 20

12、13, and conflicting national standards shall be withdrawn at the latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights.

13、This document supersedes EN ISO 10511:1997. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former

14、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10511:20

15、12 has been approved by CEN as EN ISO 10511:2012 without any modification. BS EN ISO 10511:2012ISO 10511:2012(E) ISO 2012 All rights reserved iiiContents PageForeword iv1 Scope 12 Normative references . 13 Dimensions . 14 Requirements and reference International Standards 35 Designation . 3Bibliogra

16、phy . 4BS EN ISO 10511:2012ISO 10511:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

17、 body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Elect

18、rotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted

19、by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent ri

20、ghts. ISO shall not be held responsible for identifying any or all such patent rights.ISO 10511 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with metric internal thread.This third edition cancels and replaces the second edition (ISO 10511:1997), of which it

21、constitutes a minor revision.iv ISO 2012 All rights reservedBS EN ISO 10511:2012INTERNATIONAL STANDARD ISO 10511:2012(E)Prevailing torque type hexagon thin nuts (with non-metallic insert)1 ScopeThis International Standard specifies the characteristics of prevailing torque type hexagon thin nuts (wit

22、h non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 04 and 05.NOTE The dimensions of the nuts correspond to those given in ISO 4035 plus prevailing torque featu

23、re.If other specifications are required, they can be selected from existing International Standards, for example ISO 261, ISO 724, ISO 898-2, ISO 965-2, ISO 2320 and ISO 4759-1.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are ind

24、ispensable to its application. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 225, Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensionsISO 261, ISO general purpose metric screw threads General planISO 724, ISO ge

25、neral-purpose metric screw threads Basic dimensionsISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fine pitch threadISO 965-2, ISO general purpose metric screw threads Tolerances Part 2: Limits of sizes

26、 for general purpose external and internal screw threads Medium qualityISO 2320, Prevailing torque type steel nuts Mechanical and performance propertiesISO 3269, Fasteners Acceptance inspectionISO 4042, Fasteners Electroplated coatingsISO 4759-1, Tolerances for fasteners Part 1: Bolts, screws, studs

27、 and nuts Product grades A, B and CISO 6157-2, Fasteners Surface discontinuities Part 2: NutsISO 8992, Fasteners General requirements for bolts, screws, studs and nutsISO 10683, Fasteners Non-electrolytically applied zinc flake coatings3 DimensionsSee Figure 1 and Table 1.Symbols and descriptions of

28、 dimensions are specified in ISO 225. ISO 2012 All rights reserved 1BS EN ISO 10511:2012ISO 10511:2012(E)aPrevailing torque element; shape at the discretion of the manufacturer.b = 15 to 30.c = 90 to 120.Figure 1Table 1 DimensionsDimensions in millimetresThread DM3 M4 M5 M6 M8 M10 M12 (M14)aM16 M20

29、M24 M30 M36Pb0,5 0,7 0,8 1 1,25 1,5 1,75 2 2 2,5 3 3,5 4damax. 3,45 4,60 5,75 6,75 8,75 10,80 13,00 15,10 17,30 21,60 25,90 32,40 38,90min. 3,00 4,00 5,00 6,00 8,00 10,00 12,00 14,00 16,00 20,00 24,00 30,00 36,00dwmin. 4,56 5,90 6,90 8,90 11,60 14,60 16,60 19,60 22,50 27,70 33,20 42,80 51,10e min. 6

30、,01 7,66 8,79 11,05 14,38 17,77 20,03 23,35 26,75 32,95 39,55 50,85 60,79hmax. 3,90 5,00 5,00 6,00 6,76 8,56 10,23 11,32 12,42 14,90 17,80 22,20 25,50min. 3,42 4,52 4,52 5,52 6,18 7,98 9,53 10,22 11,32 13,10 16,00 20,10 23,40m min. 1,55 1,95 2,45 2,90 3,70 4,70 5,70 6,42 7,42 9,10 10,90 13,90 16,90m

31、wmin. 1,24 1,56 1,96 2,32 2,96 3,76 4,56 5,14 5,94 7,28 8,72 11,12 13,52smax. 5,50 7,00 8,00 10,00 13,00 16,00 18,00 21,00 24,00 30,00 36,00 46,00 55,00min. 5,32 6,78 7,78 9,78 12,73 15,73 17,73 20,67 23,67 29,16 35,00 45,00 53,80aThe size in parentheses should be avoided if possible.bP is the pitch

32、 of the thread.2 ISO 2012 All rights reservedBS EN ISO 10511:2012ISO 10511:2012(E)4 Requirements and reference International StandardsSee Table 2.Table 2 Requirements and reference International StandardsMaterial Nut body SteelInsert For example, polyamideGeneral requirements International Standard

33、ISO 8992Thread Tolerance class 6HInternational Standards ISO 261, ISO 724, ISO 965-2Mechanical and performance propertiesProperty class 04, 05International Standards ISO 898-2, ISO 2320ToleranceProduct gradeFor D M16: AFor D M16: BInternational Standard ISO 4759-1Finish CoatingAs processedRequiremen

34、ts for electroplating are specified in ISO 4042.Requirements for non-electrolytically applied zinc flake coatings are specified in ISO 10683.Additional requirements or other finishes or coatings shall be agreed between the supplier and the purchaser.Surface integrity Limits for surface discontinuiti

35、es are specified in ISO 6157-2.Acceptability Acceptance inspection is specified in ISO 3269.5 DesignationEXAMPLE A prevailing torque type hexagon thin nut, with non-metallic insert, thread M12 and property class 04 is designated as follows:Prevailing torque type hexagon thin nut ISO 10511 - M12 - 04

36、 ISO 2012 All rights reserved 3BS EN ISO 10511:2012ISO 10511:2012(E)Bibliography1 ISO 4035, Hexagon thin nuts chamfered (style 0) Product grades A and B4 ISO 2012 All rights reservedBS EN ISO 10511:2012This page deliberately left blankThis page deliberately left blankBSI is the independent national

37、body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published

38、 by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that

39、 they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the id

40、entity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest

41、 editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicati

42、onscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI p

43、rovides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof

44、standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found at information about British Standards is avail

45、able on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has

46、formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise w

47、ithout prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email: