EN ISO 10547-2009 en Polyester fibre ropes - Double braid construction《聚酯纤维缆绳 双股结构 ［代替 CEN EN 14684］》.pdf

1、BS EN ISO10547:2009ICS 59.080.50NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDPolyester fibre ropes Double braidconstruction (ISO10547:2009)This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 December2009 BS

2、I 2009ISBN 978 0 580 61722 5Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 10547:2009National forewordThis British Standard is the UK implementation of EN ISO 10547:2009.It supersedes BS EN 14684:2004 which is withdrawn.The UK participation in its preparation was entrusted to T

3、echnicalCommittee TCI/77, Ropes and cordage and fishing nets.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Comp

4、liance with a British Standard cannot confer immunityfrom legal obligations.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10547 December 2009 ICS 59.080.50 Supersedes EN 14684:2004English Version Polyester fibre ropes - Double braid construction (ISO 10547:2009) Cordages en fibres de poly

5、ester - Cordages coaxiaux (ISO 10547:2009) Polyester Faserseile - Doppelgeflechtausfhrung (ISO 10547:2009) This European Standard was approved by CEN on 4 November 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

6、Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, F

7、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cypr

8、us, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION CO

9、MIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10547:2009: EBS EN ISO 10547:2009EN ISO 10547:2009 (E) 3 Fore

10、word This document (EN ISO 10547:2009) has been prepared by Technical Committee ISO/TC 38 “Textiles“ in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard,

11、either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

12、 CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14684:2004. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Bel

13、gium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notic

14、e The text of ISO 10547:2009 has been approved by CEN as a EN ISO 10547:2009 without any modification. BS EN ISO 10547:2009ISO 10547:2009(E) ISO 2009 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO m

15、ember bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governm

16、ental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Dir

17、ectives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bo

18、dies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10547 was prepared by Technical Committee ISO/TC 38, Textiles. BS EN ISO 105

19、47:2009BS EN ISO 10547:2009INTERNATIONAL STANDARD ISO 10547:2009(E) ISO 2009 All rights reserved 1Polyester fibre ropes Double braid construction 1 Scope This International Standard specifies requirements for double braided ropes and for higher-strength double braided ropes made of polyester and giv

20、es rules for their designation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) app

21、lies. ISO 1968, Fibre ropes and cordage Vocabulary ISO 2307, Fibre ropes Determination of certain physical and mechanical properties ISO 9554:2005, Fibre ropes General specifications 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 1968 apply. 4 Desig

22、nation Fibre ropes shall be designated by the following: the words “fibre rope”; the number of this International Standard; the reference number of the rope; the material from which the rope is made; the level of strength of rope: double braided rope or higher-strength (hs) double braided rope. EXAM

23、PLE 1 Designation of a double braided rope, reference number 20, corresponding to a linear density of 319 ktex made of polyester: Fibre rope ISO 10547 - 20 - PES EXAMPLE 2 Designation of a higher-strength double braided rope, reference number 20, corresponding to a linear density of 319 ktex made of

24、 polyester: Fibre rope ISO 10547 - 20 - PES (hs) BS EN ISO 10547:2009ISO 10547:2009(E) 2 ISO 2009 All rights reserved5 General requirements 5.1 Construction Ropes produced in accordance with this International Standard shall be constructed in the following way. The rope (see Figure 1) shall be of a

25、double braided construction wherein an inner braid of hollow structure manufactured in a separate operation shall serve as the core, while a cover (outer braid) is braided over it in a second operation. The weight of either the inner braid or the outer braid shall not exceed 55 % of the total weight

26、 of the rope. It shall also conform to ISO 9554. Figure 1 Shape of a polyester double braided rope and of a polyester higher-strength double braided rope 5.2 Number of strands For ropes of reference number from 6 to 16, the minimum number of strands of outer braid shall be 16. For ropes of reference

27、 number greater than 16, the minimum number of strands of outer braid shall be 24. 5.3 Manufacture and labelling Manufacture, labelling, packaging, invoicing and delivered lengths shall conform to ISO 9554. 5.4 Strand interchange 5.4.1 Strand interchange shall be the overlapping continuation of a si

28、ngle interrupted strand (or multiple strand) with another identical strand which follows the identical path in the braid. Although it is desirable that no strand interchange be present in the core or the cover of any size and length of rope, some methods of manufacture impose limitations. To compens

29、ate for these limitations, strand interchange shall be in accordance with 5.4.2 to 5.4.5. 5.4.2 To allow for a braider malfunction, one strand interchange shall be permitted in the core and one in the cover for a standard length of 200 m or less. 5.4.3 For lengths greater than 200 m, additional stra

30、nd interchanges shall be permitted if deemed necessary by the manufacturer. 5.4.4 In producing the strand interchanges, the distance of the overlapping shall be equivalent to 8 times the rope size number but not less than 600 mm for ropes whose reference numbers are 72 and less. Strand interchanges

31、shall be at least 12 m apart measured from interchange centre to interchange centre. 5.4.5 Because strand interchanges within the core are difficult to detect after application of the cover, a record of verifiable information attesting to the number of strand interchanges shall be available to an in

32、spector. BS EN ISO 10547:2009ISO 10547:2009(E) ISO 2009 All rights reserved 36 Physical properties The linear density and minimum breaking force shall conform to Table 1. Table 1 Linear density and minimum breaking force of polyester double braided rope and polyester higher-strength double braided r

33、ope Linear densitybcMinimum breaking forcedekN Double braided rope Higher-strength double braided rope Reference numberaNominal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations Unspliced ropes Ropes with eye-spliced terminations 6 28,7 6,67 6,00 8,34 7,51 8 51,0 10 11,6 10,4 14,5

34、 13,0 10 79,7 17,8 16,0 22,3 20,1 12 115 8 25,4 22,9 31,7 28,5 14 156 34,2 30,8 42,7 38,4 16 204 44,2 39,8 55,3 49,8 18 258 55,5 49,9 69,4 62,5 20 319 68,0 61,2 85,0 76,5 22 386 81,6 73,4 102 92 24 459 96,8 87,1 121 109 26 539 113 102 141 127 28 625 130 117 163 147 30 717 149 134 186 167 32 816 5 16

35、8 151 210 189 36 1 030 211 190 264 238 40 1 280 259 233 324 292 44 1 540 311 280 389 350 48 1 840 368 331 460 414 52 2 160 430 387 537 483 56 2 500 494 445 618 556 60 2 870 566 509 707 636 64 3 260 640 576 800 720 72 4 130 800 720 1 000 900 80 5 100 984 886 1 230 1 110 88 6 170 1 180 1 060 1 480 1 3

36、30 96 7 350 1 400 1 260 1 750 1 580 104 8 620 1 630 1 470 2 040 1 840 112 10 000 1 880 1 690 2 350 2 120 BS EN ISO 10547:2009ISO 10547:2009(E) 4 ISO 2009 All rights reservedTable 1 (continued) Linear densitybcMinimum breaking forcedekN Double braided rope Higher-strength double braided rope Referenc

37、e numberaNominal ktex Tolerance % Unspliced ropes Ropes with eye-spliced terminations Unspliced ropes Ropes with eye-spliced terminations 120 11 500 2 150 1 940 2 690 2 420 128 13 100 2 430 2 190 3 040 2 740 144 16 500 3 050 2 750 3 810 3 430 168 22 500 5 4 100 3 690 5 130 4 620 192 29 400 5 340 4 8

38、10 6 680 6 010 216 37 300 6 700 6 030 8 380 7 540 240 46 000 8 200 7 380 10 300 9 270 aThe reference number corresponds to the approximate diameter, in millimetres. bThe linear density, in kilotex, corresponds to the net mass per length of the rope, expressed in grams per metre or in kilograms per k

39、ilometre. cThe linear density is obtained under reference tension and is measured as specified in ISO 2307.dThe breaking forces relate to new, dry and wet ropes.eA force determined by the test methods specified in ISO 2307 is not necessarily an accurate indication of the force at which that rope mig

40、ht break in other circumstances and situations. The type and quality of termination, the rate of force application, prior conditioning and previous force applications to the rope can significantly influence the breaking force. A rope bent around a post, capstan, pulley or sheave may break at a signi

41、ficantly lower force. A knot or other distortion in a rope may significantly reduce the breaking force. 7 Marking 7.1 Polyester double braided ropes The marking of polyester double braided ropes shall be carried out in accordance with Clause 6 of ISO 9554:2005. 7.2 Polyester higher-strength double b

42、raided ropes 7.2.1 For higher-strength ropes with a reference number of less than 14, a central marker yarn in a blue colour shall be incorporated into the centre of the rope. 7.2.2 For higher-strength ropes with a reference number greater than or equal to 14, the quality identification on the marke

43、r tape shall indicate higher strength (hs). BS EN ISO 10547:2009BS EN ISO10547:2009BSI GroupHeadquarters 389Chiswick High Road,London, W4 4AL, UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 - British Standards InstitutionBSI is the independent national body responsible for preparing BritishStandards.

44、It presents the UK view on standards in Europe and at theinternational level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments oreditions.It is the constant aim of B

45、SI to improve the quality of our products and services.We would be grateful if anyone finding an inaccuracy or ambiguity while usingthis British Standard would inform the Secretary of the technical committeeresponsible, the identity of which can be found on the inside front cover. Tel:+44 (0)20 8996

46、 9000. Fax: +44 (0)20 8996 7400.BSI offers members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Buying standardsOrders for all BSI, international and foreign standards publications should beaddressed to Customer Servi

47、ces. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 89967001 Email: You may also buy directly using a debit/creditcard from the BSI Shop on the Website http:/ response to orders for international standards, it is BSI policy to supply theBSI implementation of those that have been published as British Stan

48、dards,unless otherwise requested.Information on standardsBSI provides a wide range of information on national, European andinternational standards through its Library and its Technical Help to ExportersService. Various BSI electronic information services are also available whichgive details on all i

49、ts products and services. Contact Information Centre. Tel:+44 (0)20 8996 7111 Fax: +44 (0)20 8996 7048 Email: Subscribing members of BSI are kept up to date with standards developmentsand receive substantial discounts on the purchase price of standards. For detailsof these and other benefits contact Membership Administration. Tel: +44 (0)208996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to Bri