EN ISO 10683-2000 en Fasteners - Non-Electrolytically Applied Zinc Flake Coatings《紧固件 非电解锌片覆层 ISO 10683-2000》.pdf

1、BSI Standards PublicationBS EN ISO 10683:2014Fasteners Non-electrolytically applied zincflake coatings (ISO 10683:2014)BS EN ISO 10683:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO10683:2014. It supersedes BS EN ISO 10683:2000 which is withdrawn.The U

2、K participation in its preparation was entrusted to TechnicalCommittee FME/9, Fasteners.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for i

3、ts correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 71827 4ICS 21.060.01; 25.220.40Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards P

4、olicy and Strategy Committee on 30 June 2014.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10683 May 2014 ICS 21.060.01; 25.220.40 Supersedes EN ISO 10683:2000English Version Fasteners - Non-electrolytically applied zinc flake coatings

5、(ISO 10683:2014) Fixations - Revtements non lectrolytiques de zinc lamellaire (ISO 10683:2014) Verbindungselemente - Nichtelektrolytisch aufgebrachte Zinklamellenberzge (ISO 10683:2014) This European Standard was approved by CEN on 17 April 2014. CEN members are bound to comply with the CEN/CENELEC

6、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to

7、 any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the officia

8、l versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No

9、rway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exp

10、loitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10683:2014 EBS EN ISO 10683:2014EN ISO 10683:2014 (E) 3 Foreword This document (EN ISO 10683:2014) has been prepared by Technical Committee ISO/TC 2 “Fasteners” in collaboration with Technical Committ

11、ee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2014, and conflicting national standards shall be withdrawn at the lates

12、t by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10683:2000. According to the CEN-C

13、ENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary,

14、 Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10683:2014 has been approved by CEN as EN ISO 10683:2014 without any modif

15、ication. BS EN ISO 10683:2014ISO 10683:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 24 General characteristics of the coating 24.1 Zinc flake coating systems . 24.2 Composition of the systems . 24.3 Mechan

16、ical and physical properties and curing. 24.4 Avoidance of internal hydrogen embrittlement . 34.5 Coating systems and coating processes. 35 Corrosion protection and testing 35.1 General . 35.2 Neutral salt spray test . 35.3 Sulfur dioxide test (Kesternich test) 45.4 Bulk handling, automatic processe

17、s such as feeding and/or sorting, storage and transport 46 Dimensional requirements and testing 46.1 General . 46.2 Bolts, screws, studs and nuts with ISO metric threads 56.3 Other fasteners . 67 Mechanical and physical properties and testing . 67.1 Appearance 67.2 Corrosion resistance related to te

18、mperature . 67.3 Test methods for thickness or coating weight determination . 67.4 Ductility . 77.5 Adhesion/cohesion . 77.6 Sacrificial cathodic protection . 77.7 Torque/tension relationship . 77.8 Determination of hexavalent chromium . 88 Applicability of tests . 88.1 General . 88.2 Tests mandator

19、y for each lot 88.3 Tests for in-process control 88.4 Tests to be conducted when specified by the purchaser 89 Designation 99.1 Designation of zinc flake coating systems for the order . 99.2 Designation of zinc flake coating systems for labelling . 910 Ordering requirements 10Annex A (informative) D

20、esign aspects and assembly of coated fasteners 11Annex B (informative) Coating thickness and thread clearance for ISO metric screw threads .15Annex C (informative) Control of the corrosivity of the cabinet for neutral salt spray test for coated fasteners .22Bibliography .30BS EN ISO 10683:2014ISO 10

21、683:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for

22、 which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on a

23、ll matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. T

24、his document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any o

25、r all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users

26、 and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary

27、 informationThe committee responsible for this document is ISO/TC 2, Fasteners, SC 14, Surface coatings.This second edition cancels and replaces the first edition (ISO 10683:2000). The main technical changes are the following: wider application to all types of fasteners and all parties involved, see

28、 Introduction, Clause 1, 4.1, 4.3, Clause 7 and Annex A; full description of zinc flake coating systems, see 4.1, 4.2 and A.1.2; definitions related to coatings for fasteners moved to the new standard ISO 1891-2; detailed specification in relation with hexavalent chromium; detailed specification con

29、cerning pre-treatment in relation with internal hydrogen embrittlement, see 4.4; precedence of corrosion resistance over thickness, see 5.2 and 5.3; extended range of properties for coatings and related test methods (including Kesternich test, thickness and weight determination, torque/tension relat

30、ionship, determination of hexavalent chromium), see 5.3, 7.3, 7.7, 7.8 and A.2; consideration related to bulk handling, automatic processes, storage and transport, see 5.4 and A.4; alternatives for gaugeability and assemblability/mountability, see 6.2.2; revised arrangement of tests to be carried ou

31、t for each lot, for in-process control or when specified, see Clause 8; revised designation for coating systems and addition of labelling, see Clause 9; consideration related to design aspects and assembly of coated fasteners, see new Annex A;iv ISO 2014 All rights reservedBS EN ISO 10683:2014ISO 10

32、683:2014(E) detailed specification for coating thickness and thread clearance for ISO metric threads, moved to new Annex B; precise control of corrosivity for the salt spray cabinet for coated fasteners, see new Annex C. ISO 2014 All rights reserved vBS EN ISO 10683:2014ISO 10683:2014(E)Introduction

33、The revision of ISO 10683:2000 was made in order to define the relevant requirements on zinc flake coated fasteners (coating systems with and without hexavalent chromium) for all parties involved in the fastener field, i.e. chemical suppliers, coaters, fastener manufacturers, distributors and end us

34、ers. It covers all types of fasteners, i.e. fasteners with ISO metric thread, fasteners with non-ISO metric thread (including thread forming, ASME inch 60 screw thread, etc.) and non-threaded fasteners (including washers, pins, clips, etc.). It also provides basic advice for the design and use of co

35、ated fasteners in assembly.vi ISO 2014 All rights reservedBS EN ISO 10683:2014INTERNATIONAL STANDARD ISO 10683:2014(E)Fasteners Non-electrolytically applied zinc flake coatings1 ScopeThis International Standard specifies requirements for non-electrolytically applied zinc flake coatings for steel fas

36、teners. It applies to coatings: with or without hexavalent chromium; with or without top coat; with or without lubricant (integral lubricant and/or subsequently added lubricant).National regulations for the restriction or prohibition of certain chemical elements should be taken into account in the c

37、ountries or regions concerned.It applies to bolts, screws, studs and nuts with ISO metric thread, to fasteners with non-ISO metric thread, and to non-threaded fasteners such as washers, pins, clips, etc.NOTE Coatings in accordance with this International Standard are especially used for high strengt

38、h fasteners (1 000 MPa) to avoid risk of internal hydrogen embrittlement (see 4.4).Information for design and assembly of coated fasteners is given in Annex A.This International Standard does not specify requirements for such fastener properties as weldability or paintability. It does not apply to m

39、echanically applied zinc coatings.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referen

40、ced document (including any amendments) applies.ISO 1463, Metallic and oxide coatings Measurement of coating thickness Microscopical methodISO 1502, ISO general-purpose metric screw threads Gauges and gaugingISO 1891-2, Fasteners Terminology Part 2: Vocabulary and definitions for coatings1)ISO 3269,

41、 Fasteners Acceptance inspectionISO 3613:2010, Metallic and other inorganic coatings Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys Test methodsISO 6988, Metallic and other non organic coatings Sulfur dioxide test with general condensation of moistureI

42、SO 8991, Designation system for fastenersISO 9227:2012, Corrosion tests in artificial atmospheres Salt spray testsISO 16047, Fasteners Torque/clamp force testing1) To be published. ISO 2014 All rights reserved 1BS EN ISO 10683:2014ISO 10683:2014(E)3 Terms and definitionsFor the purposes of this docu

43、ment, the terms and definitions given in ISO 1891-2 apply.4 General characteristics of the coating4.1 Zinc flake coating systemsZinc flake coating systems are produced by applying a zinc flake dispersion to the surface of a steel fastener, usually with the addition of aluminium flakes, in a suitable

44、 medium. Under the influence of heat (curing), a bonding amongst flakes and also between flakes and substrate is generated, thus forming an inorganic surface coating sufficiently electrically conducting to ensure cathodic protection. The coating may or may not contain hexavalent chromium, Cr(VI).Spe

45、cial techniques may be necessary to avoid excessive or insufficient coating thickness.Special techniques may be necessary to prevent lightweight and/or flat fasteners from sticking together (e.g. washers, clips, fasteners with captive washer, flanged nuts).An additional top coat can be applied to in

46、crease corrosion resistance and/or to achieve specific properties (e.g. torque/tension properties, chemical resistance, aspect, colour, electrical insulation/conductivity see A.2).4.2 Composition of the systemsThere are four basic zinc flake coating systems as shown in Figure 1.Key1 only base coat2

47、base coat + lubricant3 base coat + top coat4 base coat + top coat + lubricantFigure 1 Basic zinc flake coating systemsBase coat and top coat can be with integral lubricant, see detailed possible combinations in A.1.2.4.3 Mechanical and physical properties and curingThe coating process shall not adve

48、rsely influence the mechanical and physical properties of the fasteners.NOTE Distributors who coat non-coated fasteners are considered as alteration coating distributors in accordance with ISO 16426.9Depending on the zinc flake coating system, the curing temperatures can be up to 320 C. The curing t

49、emperature shall not be above the tempering temperature of quenched and tempered fasteners.2 ISO 2014 All rights reservedBS EN ISO 10683:2014ISO 10683:2014(E)WARNING The curing process (especially with higher temperature and/or longer duration) may affect the fatigue limit of fasteners with thread rolled after heat treatment. See also A.1.3 for other possible effects of curing.4.4 Avoidance of internal hydrogen embrittlementA characteristic of zinc flake coating systems is that hydrogen is not generated