EN ISO 10848-3-2006 en Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3 Application to light elements w.pdf

1、BRITISH STANDARDBS EN ISO 10848-3:2006Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light elements when the junction has a substantial influenceThe European Standard EN ISO 10848-3:2006 has the status of a Br

2、itish StandardICS 91.120.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 10848-3:2006This British Standard was published under the autho

3、rity of the Standards Policy and Strategy Committee on 28 April 2006 BSI 2006ISBN 0 580 48163 8National forewordThis British Standard is the official English language version of EN ISO 10848-3:2006. It is identical with ISO 10848-3:2006.The UK participation in its preparation was entrusted by Techni

4、cal Committee EH/1, Acoustics, to Subcommittee EH/1/6, Building acoustics, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publication

5、s referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary

6、provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpreta

7、tion, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, page

8、s ii to iv, pages 1 to 8, an inside back cover and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 10848-3April 2006ICS 91.120.2

9、0English VersionAcoustics - Laboratory measurement of the flankingtransmission of airborne and impact sound between adjoiningrooms - Part 3: Application to light elements when the junctionhas a substantial influence (ISO 10848-3:2006)Acoustique - Mesurage en laboratoire des transmissionslatrales du

10、bruit arien et des bruits de choc entre picesadjacentes - Partie 3: Application aux lments lgerslorsque la jonction a une influence importante (ISO 10848-3:2006)Akustik - Messung der Flankenbertragung von Luftschallund Trittschall zwischen benachbarten Rumen inPrfstnden - Teil 3: Anwendung auf leich

11、te Bauteile, wenndie Verbindung wesentlichen Einfluss hat (ISO 10848-3:2006)This European Standard was approved by CEN on 16 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national s

12、tandard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other

13、language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

14、Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNG

15、Management Centre: rue de Stassart, 36 B-1050 Brussels 2006 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 10848-3:2006: EForeword This document (EN ISO 10848-3:2006) has been prepared by Technical Committee CEN/TC 126 “Acoustic

16、 properties of building elements and of buildings“, the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 43 “Acoustics“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at th

17、e latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, C

18、zech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN ISO 10848-3:2006Reference numberISO 10848-3

19、:2006(E)INTERNATIONAL STANDARD ISO10848-3First edition2006-04-01Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light elements when the junction has a substantial influence Acoustique Mesurage en laboratoire de

20、s transmissions latrales du bruit arien et des bruits de choc entre des pices adjacentes Partie 3: Application aux lments lgers lorsque la jonction a une influence importante EN ISO 10848-3:2006ii iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 2 4 Measur

21、ing equipment. 3 5 Test arrangement 3 5.1 Requirements for the laboratory. 3 5.2 Installation of the test junction 3 5.3 Shielding technique 4 6 Test procedures 4 7 Precision 4 8 Expression of results . 4 9 Test report . 5 Annex A (informative) Measurement of Dn,f,Iand Ln,f,Iwith intensity technique

22、 7 Bibliography . 8 EN ISO 10848-3:2006iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

23、body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electr

24、otechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted

25、 by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

26、rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10848-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in collaboration with Technical Committee I

27、SO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). ISO 10848 consists of the following parts, under the general title Acoustics Laboratory measurement of the flanking transmission of airborne a

28、nd impact sound between adjoining rooms: Part 1: Frame document Part 2: Application to light elements when the junction has a small influence Part 3: Application to light elements when the junction has a substantial influence The following part is under preparation: Part 4: Application to all other

29、cases EN ISO 10848-3:20061Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 3: Application to light elements when the junction has a substantial influence 1 Scope ISO 10848 specifies measurement methods to be performed in a labora

30、tory test facility in order to characterize the flanking transmission of one or several building components. The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as EN 12354-1 and EN 12354-2. This part of ISO 10

31、848 is specifically referred to in ISO 10848-1:2006, 4.4, as being a supporting part to the frame document. This part of ISO 10848 applies to structurally connected light elements forming a T or X junction. A light element is defined in ISO 10848-1:2006, Clause 3. The relevant quantity to be measure

32、d is selected according to ISO 10848-1:2006, 4.4. The performance of the building components is expressed either as an overall quantity for the combination of elements and junction (such as Dn,fand/or Ln,f) or as the vibration reduction index Kijof a junction. Dn,fand Ln,fdepend on the actual dimens

33、ions of the elements, while Kijis in principle an invariant quantity. For general application of the test results, Dn,fand Ln,fare the relevant quantities to measure for lightweight, well-damped types of elements (for example, timber or metal framed stud walls or wooden floors on beams), where the a

34、ctual situation has no real influence on the sound reduction index and damping of the elements. If the acoustical properties of the elements are substantially influenced by the actual situation, Kijis the relevant quantity to measure. 2 Normative references The following referenced documents are ind

35、ispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 140-2, Acoustics Measurement of sound insulation in buildings and of building elements

36、Part 2: Determination, verification and application of precision data ISO 140-3:1995, Acoustics Measurement of sound insulation in buildings and of building elements Part 3: Laboratory measurements of airborne sound insulation of building elements ISO 140-6:1998, Acoustics Measurement of sound insul

37、ation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors EN ISO 10848-3:20062 ISO 717-1, Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation ISO 717-2, Acoustics Rating of sound insulatio

38、n in buildings and of building elements Part 2: Impact sound insulation ISO 10848-1:2006, Acoustics Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms Part 1: Frame document 3 Terms and definitions For the purposes of this document, the following

39、 terms and definitions apply. 3.1 normalized flanking level difference Dn,fdifference in the space and time average sound pressure level produced in two rooms by one or more sound sources in one of them, when the transmission only occurs through a specified flanking path NOTE Dn,f is normalized to a

40、n equivalent sound absorption area (A0) in the receiving room and expressed, in decibels: n,f 1 2010 lg dBADLLA= (1) where L1is the average sound pressure level in the source room, in decibels; L2is the average sound pressure level in the receiving room, in decibels; A is the equivalent sound absorp

41、tion area in the receiving room, in square metres; A0is the reference equivalent sound absorption area, in square metres; A0= 10 m2. ISO 10848-1:2006 3.2 normalized flanking impact sound pressure level Ln,fspace and time average sound pressure level in the receiving room produced by a standard tappi

42、ng machine operating at different positions on a tested floor in the source room, when the transmission only occurs through a specified flanking path NOTE Ln,fis normalized to an equivalent sound absorption area (A0) in the receiving room and is expressed in decibels: n,f 2010 lg dBALLA=+ (2) where

43、L2is the average sound pressure level in the receiving room, in decibels; A is the equivalent sound absorption area in the receiving room, in square metres; A0is the reference equivalent sound absorption area, in square metres; A0= 10 m2. ISO 10848-1:2006 EN ISO 10848-3:200633.3 vibration reduction

44、index Kijvalue given by the following equation and expressed in decibels: ,10 lg dBijij v ijijlKDaa=+ (3) where ,vijD is the direction-averaged velocity level difference between elements i and j, in decibels; lijis the junction length between elements i and j, in metres; ai, ajare the equivalent abs

45、orption lengths of elements i and j, in metres. NOTE 1 The equivalent absorption length depends on the structural reverberation time as defined in ISO 10848-1:2006, 3.8. For lightweight, well-damped types of elements where the actual situation has no real influence on the sound reduction index and d

46、amping of an element, ajis taken as numerically equal to the surface area Sjof the element, aj= Sj/l0, where the reference length l0= 1 m. NOTE 2 The vibration reduction index is related to the vibrational power transmission over a junction between structural elements, normalized in order to make it

47、 an invariant quantity. 4 Measuring equipment The equipment shall fulfil the requirements given in ISO 10848-1:2006, Clause 5. 5 Test arrangement 5.1 Requirements for the laboratory The general requirements for test specimens and test rooms given in ISO 10848-1:2006, Clause 6 shall be fulfilled. For

48、 measurements of the vibration reduction index Kijwith structure-borne excitation, it is not necessary to have an envelope forming a source and receiving room around the junction. A test object with a vertical junction line may be placed directly onto a heavy concrete floor fulfilling the condition

49、expressed in ISO 10848-1:2006, 8.2. The situation is a little more complicated for horizontal junctions, since stability shall be provided. In most situations, it is necessary to use the same type of test facility for all types of measurement, with the exception that the requirements for the airborne sound insulation between the volumes do not apply for measurements of Kijwith structure-borne excitation. 5.2 Installation of the test junction Because the behaviour of light elements is not influenced significantly