EN ISO 10848-4-2017 en Acoustics - Laboratory and field measurement of flanking transmission for airborne impact and building service equipment sound between adjoining rooms - Part.pdf

1、Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining roomsPart 4: Application to junctions with at least one Type A element (ISO 10848-4:2017)BS EN ISO 10848-4:2017BSI Standards PublicationWB11885_BSI_Standa

2、rdCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10848-4 October 2017 ICS 91.120.20 Supersedes EN ISO 10848-4:2010English Version Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment so

3、und between adjoining rooms - Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017) Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latrales du bruit arien, des bruits de choc et du bruit dquipement technique de btiment entre des pices - Partie

4、 4: Application aux jonctions ayant au moins un lment de Type A (ISO 10848-4:2017) Akustik - Messung der Flankenbertragung von Luftschall, Trittschall und Schall von Gebudetechnischen Anlagen zwischen benachbarten Rumen im Prfstand und am Bau - Teil 4: Anwendung auf Stostellen mit mindestens einem T

5、yp A-Bauteil (ISO 10848-4:2017) This European Standard was approved by CEN on 2 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

6、 lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u

7、nder the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Forme

8、r Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION

9、 COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10848-4:2017 ENational forewordThis British St

10、andard is the UK implementation of EN ISO 10848-4:2017. It is identical to ISO 10848-4:2017. It supersedes BS EN ISO 10848-4:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EH/1/6, Building acoustics.A list of organizations represented on this co

11、mmittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 94766 7ICS 91.1

12、20.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 1

13、08484:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10848-4 October 2017 ICS 91.120.20 Supersedes EN ISO 10848-4:2010English Version Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms

14、- Part 4: Application to junctions with at least one Type A element (ISO 10848-4:2017) Acoustique - Mesurage en laboratoire et sur le terrain des transmissions latrales du bruit arien, des bruits de choc et du bruit dquipement technique de btiment entre des pices - Partie 4: Application aux jonction

15、s ayant au moins un lment de Type A (ISO 10848-4:2017) Akustik - Messung der Flankenbertragung von Luftschall, Trittschall und Schall von Gebudetechnischen Anlagen zwischen benachbarten Rumen im Prfstand und am Bau - Teil 4: Anwendung auf Stostellen mit mindestens einem Typ A-Bauteil (ISO 10848-4:20

16、17) This European Standard was approved by CEN on 2 August 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r

17、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a

18、 CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Maced

19、onia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISAT

20、ION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10848-4:2017 EBS EN ISO 108484:2017EN ISO 10848-4:2017 (E) 3 European fore

21、word This document (EN ISO 10848-4:2017) has been prepared by Technical Committee ISO/TC 43 “Acoustics“ in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building elements and of buildings” the secretariat of which is held by AFNOR. This European Standard shall be given th

22、e status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018 and conflicting national standards shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the su

23、bject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 10848-4:2010. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe

24、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki

25、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 10848-4:2017 has been approved by CEN as EN ISO 10848-4:2017 without any modification. ISO 10848-4:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Principle 25

26、 Instrumentation 26 Test arrangement . 26.1 Requirements for the laboratory . 26.2 Requirements for a building structure in the field situation 26.3 Installation of the test junction . 36.3.1 Type A elements . 36.3.2 Type B elements . 46.3.3 Transmission through structures of the test facility or bu

27、ilding structure in the field situation 47 Test procedures . 48 Precision . 49 Expression of results 410 Test report . 5Bibliography 7 ISO 2017 All rights reserved iiiContents PageBS EN ISO 108484:2017ISO 10848-4:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Princ

28、iple 25 Instrumentation 26 Test arrangement . 26.1 Requirements for the laboratory . 26.2 Requirements for a building structure in the field situation 26.3 Installation of the test junction . 36.3.1 Type A elements . 36.3.2 Type B elements . 46.3.3 Transmission through structures of the test facilit

29、y or building structure in the field situation 47 Test procedures . 48 Precision . 49 Expression of results 410 Test report . 5Bibliography 7 ISO 2017 All rights reserved iiiContents PageBS EN ISO 108484:2017ISO 10848-4:2017(E)ForewordISO (the International Organization for Standardization) is a wor

30、ldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on

31、 that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this d

32、ocument and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Direc

33、tives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the deve

34、lopment of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary na

35、ture of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This

36、document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoustics.This second edition cancels and replaces the first edition (ISO 10848-4:2010), which has been technically revised. The main change is the extension to field measurements.A list of all the parts i

37、n the ISO 10848 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 108484:2017ISO 10848-4:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internation

38、al Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO,

39、 also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part

40、1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the

41、elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations rec

42、eived (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment

43、, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2, Building acoust

44、ics.This second edition cancels and replaces the first edition (ISO 10848-4:2010), which has been technically revised. The main change is the extension to field measurements.A list of all the parts in the ISO 10848 series can be found on the ISO website.iv ISO 2017 All rights reserved INTERNATIONAL

45、STANDARD ISO 10848-4:2017(E)Acoustics Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 4: Application to junctions with at least one Type A element1 ScopeISO 10848 (all parts) specifies measurement method

46、s to characterize the flanking transmission of one or several building components.This document specifies laboratory and field measurements of buildings where at least one of the elements that form the construction under test is a Type A element (defined in ISO 10848-1).Laboratory measurements are u

47、sed to quantify the performance of the junction with suppressed flanking transmission from the laboratory structure. Field measurements are used to characterize the in situ performance and it is not usually possible to suppress unwanted flanking transmission sufficiently; hence, the results are prim

48、arily representative of the performance of that junction when installed in that particular building structure.The measured quantities can be used to compare different products, or to express a requirement, or as input data for prediction methods, such as ISO 12354-1 and ISO 12354-2.2 Normative refer

49、encesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 10848-1:2017, Acoustics Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Part 1: Frame documentISO 12999-1, Acoustics Dete