EN ISO 10893-1-2011 en Non-destructive testing of steel tubes - Part 1 Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the ve.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 10893-1:2011Non-destructive testing of steel tubesPart 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the ver

2、ification of hydraulic leaktightness (ISO 10893-1:2011)BS EN ISO 10893-1:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 10893-1:2011. It supersedes BS EN 10246-1:1996 and BS EN 10246-2:2000, which are withdrawn.The UK participation in its preparation w

3、as entrusted to Technical Committee ISE/110, Steel Tubes, and Iron and Steel Fittings.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for i

4、ts correct application. BSI 2011 ISBN 978 0 580 59029 0 ICS 23.040.10; 77.040.20; 77.140.75 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2011.Amendme

5、nts issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 10893-1 April 2011 ICS 23.040.10; 77.040.20; 77.140.75 Supersedes EN 10246-1:1996, EN 10246-2:2000English Version Non-destructive testing of steel tubes - Part 1: Automated electromagneti

6、c testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) Essais non destructifs des tubes en acier - Partie 1: Contrle automatis lectromagntique pour vrification de ltanchit hydraulique des tubes en acier sans soudu

7、re et souds (sauf larc immerg sous flux en poudre) (ISO 10893-1:2011) Zerstrungsfreie Prfung von Stahlrohren - Teil 1: Automatisierte elektromagnetische Prfung nahtloser und geschweiter (ausgenommen unterpulvergeschweiter) Stahlrohre zum Nachweis der Dichtheit (ISO 10893-1:2011)This European Standar

8、d was approved by CEN on 10 December 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning s

9、uch national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its o

10、wn language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Ita

11、ly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-100

12、0 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10893-1:2011: EBS EN ISO 10893-1:2011EN ISO 10893-1:2011 (E) 3 Foreword This document (EN ISO 10893-1:2011) has been prepared by Technical Committee ISO/TC 17 “Ste

13、el“ in collaboration with Technical Committee ECISS/TC 110 “Steel tubes, and iron and steel fittings” the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by Octob

14、er 2011, and conflicting national standards shall be withdrawn at the latest by October 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent

15、rights. This document supersedes EN 10246-2:2000, EN 10246-1:1996. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, E

16、stonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10893-1:2011 has been approved b

17、y CEN as a EN ISO 10893-1:2011 without any modification. BS EN ISO 10893-1:2011ISO 10893-1:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Normative references1 3 Terms and definitions .1 4 General requirements .2 5 Test method .3 5.1 Test techniques .3 5.2 Test equipmen

18、t4 6 Reference tube.7 6.1 General .7 6.2 Eddy current concentric coil technique8 6.3 Eddy current segment coil technique .8 6.4 Eddy current and flux leakage rotating techniques.8 6.5 Flux leakage multiple transducer technique9 6.6 Dimensions of the reference standards9 7 Equipment calibration and c

19、hecking.11 8 Acceptance 12 9 Test report12 Annex A (informative) Guidance notes on limitations of eddy current test method .13 Annex B (normative) Limitations of magnetic flux leakage test method14 BS EN ISO 10893-1:2011ISO 10893-1:2011(E) iv ISO 2011 All rights reservedForeword ISO (the Internation

20、al Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been e

21、stablished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standard

22、ization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for vo

23、ting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all su

24、ch patent rights. ISO 10893-1 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 19, Technical delivery conditions for steel tubes for pressure purposes. This first edition cancels and replaces ISO 9302:1994, which has been technically revised. ISO 10893 consists of the following

25、parts, under the general title Non-destructive testing of steel tubes: Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness Part 2: Automated eddy current testing of seamless and welded (except subm

26、erged arc-welded) steel tubes for the detection of imperfections Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections Part 4: Liquid penetrant inspection

27、 of seamless and welded steel tubes for the detection of surface imperfections Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imp

28、erfections Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections Part 9: Automated ultrasonic testing for the detection of lamin

29、ar imperfections in strip/plate used for the manufacture of welded steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections BS EN ISO 10893-1:2011ISO 10893-1:20

30、11(E) ISO 2011 All rights reserved v Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) ste

31、el tubes BS EN ISO 10893-1:2011BS EN ISO 10893-1:2011INTERNATIONAL STANDARD ISO 10893-1:2011(E) ISO 2011 All rights reserved 1Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydr

32、aulic leaktightness 1 Scope This part of ISO 10893 specifies requirements for automated electromagnetic testing of seamless and welded steel tubes, with the exception of submerged arc-welded (SAW) tubes, for verification of hydraulic leaktightness. It is applicable to the inspection of tubes with an

33、 outside diameter greater than or equal to 4 mm, when testing with eddy current, and greater than 10 mm when testing with flux leakage method. This part of ISO 10893 can also be applicable to the testing of hollow sections. NOTE Electromagnetic inspection using magnetic flux leakage method is not ap

34、plicable to austenitic stainless steel tubes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a

35、mendments) applies. ISO 9712, Non-destructive testing Qualification and certification of personnel ISO 11484, Steel products Employers qualification system for non-destructive testing (NDT) personnel 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 11

36、484 and the following apply. 3.1 reference standard standard for the calibration of non-destructive testing equipment (e.g. drill holes, notches and recesses) 3.2 reference tube tube or length of tube containing the reference standard(s) BS EN ISO 10893-1:2011ISO 10893-1:2011(E) 2 ISO 2011 All right

37、s reserved3.3 reference sample sample (e.g. segment of tube, plate or strip) containing the reference standard(s) NOTE Only the term “reference tube“ is used in this part of ISO 10893 also covering the term “reference sample“. 3.4 tube hollow long product open at both ends, of any cross-sectional sh

38、ape 3.5 seamless tube tube made by piercing a solid product to obtain a tube hollow, which is further processed, either hot or cold, into its final dimensions 3.6 welded tube tube made by forming a hollow profile from a flat product and welding adjacent edges together, and which after welding can be

39、 further processed, either hot or cold, into its final dimensions 3.7 manufacturer organization that manufactures products in accordance with the relevant standard(s) and declares the compliance of the delivered products with all applicable provisions of the relevant standard(s) 3.8 agreement contra

40、ctual arrangement between the manufacturer and purchaser at the time of enquiry and order 4 General requirements 4.1 Unless otherwise specified by the product standard or agreed on by the purchaser and manufacturer, an electromagnetic inspection shall be carried out on tubes after completion of all

41、the primary production process operations (rolling, heat treating, cold and hot working, sizing, primary straightening, etc.). 4.2 The tubes being tested shall be sufficiently straight to ensure the validity of test. The surfaces shall be sufficiently free of foreign matter which can interfere with

42、the validity of the test. 4.3 This inspection shall be carried out by trained operators qualified in accordance with ISO 9712, ISO 11484 or equivalent, and supervised by competent personnel nominated by the manufacturer. In the case of third-party inspection, this shall be agreed on between the purc

43、haser and manufacturer. The operating authorization issued by the employer shall be according to a written procedure. NDT operations shall be authorized by a level 3 NDT individual approved by the employer. NOTE The definition of levels 1, 2 and 3 can be found in appropriate International Standards,

44、 e.g. ISO 9712 and ISO 11484. BS EN ISO 10893-1:2011ISO 10893-1:2011(E) ISO 2011 All rights reserved 35 Test method 5.1 Test techniques 5.1.1 Depending on the type of products, the dimensions, the type of steel used and its magnetic properties, the tubes shall be tested for the verification of hydra

45、ulic leaktightness by either the eddy current method or the flux leakage method, using one of the following automated or semi-automated techniques: a) concentric coil technique (eddy current method) (see Figure 1); b) segment coil technique (eddy current method) (see Figure 2); c) fixed or rotating

46、probe/pancake coil technique (eddy current method) (see Figure 3); d) fixed or rotating magnetic transducer technique (flux leakage method) (see Figure 4); e) multiple concentric magnetic transducers technique (flux leakage method) (see Figure 5). For all techniques, the chosen relative speed of mov

47、ement during the testing shall not vary by more than 10 %. NOTE 1 It is recognized that there can be, as in the case of hydraulic testing under normal production conditions, a short length at both tube ends which cannot be tested. NOTE 2 See Annexes A and B for guidelines on the limitations of the e

48、ddy current test method and flux leakage test method. 5.1.2 When testing seamless or welded tubes using the eddy current concentric coil technique, the maximum tube outside diameter tested shall be restricted to 250 mm. Square or rectangular tubes with a maximum dimension across the diagonal of 250

49、mm may also be tested using this technique with adequately shaped coils. 5.1.3 When testing tubes using the segment coils technique, the maximum tube outside diameter that shall be tested shall be limited to: 219,1 mm for 2 180 coils; 508,0 mm for 4 100 coils. 5.1.4 When testing seamless or welded tubes using the fixed or rotating probe/pancake coil eddy current technique or the fixed or rotating magnetic transducer flux leakage technique, the tube and the probes/pancake coils/magnetic transduc