EN ISO 11295-2017 en Classification and information on design and applications of plastics piping systems used for renovation and replacement.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017)BS EN ISO 11295:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11295

2、 December 2017 ICS 23.040.01 Supersedes EN ISO 11295:2010English Version Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017) Classification et informations relatives la conception et aux applications des systmes de

3、 canalisation en plastique destins la rnovation et au remplacement (ISO 11295:2017) Klassifizierung und Informationen zur Planung und Anwendung von Kunststoff-Rohrleitungssystemen fr die Renovierung und Erneuerung (ISO 11295:2017) This European Standard was approved by CEN on 10 September 2017. CEN

4、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli

5、cation to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Man

6、agement Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv

7、ia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue

8、 de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11295:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 11295:2017. It is identical to ISO 11295:2017. It sup

9、ersedes BS EN ISO 11295:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PRI/88/3, Rehabilitation of pipeline systems using plastics piping materials and components.A list of organizations represented on this committee can be obtained on request t

10、o its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 92739 3ICS 23.040.01Compliance with a British Stand

11、ard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 11295:2017EUROPEAN STANDARD NORME EURO

12、PENNE EUROPISCHE NORM EN ISO 11295 December 2017 ICS 23.040.01 Supersedes EN ISO 11295:2010English Version Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017) Classification et informations relatives la conception

13、et aux applications des systmes de canalisation en plastique destins la rnovation et au remplacement (ISO 11295:2017) Klassifizierung und Informationen zur Planung und Anwendung von Kunststoff-Rohrleitungssystemen fr die Renovierung und Erneuerung (ISO 11295:2017) This European Standard was approved

14、 by CEN on 10 September 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

15、standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language a

16、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hung

17、ary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG

18、CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11295:2017 EBS EN ISO 11295:2017EN ISO 11295:2017 (E) 3 European foreword This document (EN ISO 11295:201

19、7) has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids“ in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This European Standard shall be given t

20、he status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be withdrawn at the latest by June 2018. Attention is drawn to the possibility that some of the elements of this document may be the sub

21、ject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11295:2010. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European

22、Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,

23、Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11295:2017 has been approved by CEN as EN ISO 11295:2017 without any modification. BS EN ISO 11295:2017ISO 11295:2017(E)Foreword vIntroduction vi1 Scope .12 Normative references 13 Terms and defin

24、itions .14 Abbreviated terms 55 Classification of renovation and replacement techniques 66 Classification of renovation techniques .76.1 General . 76.2 Lining with continuous pipes . 76.3 Lining with close-fit pipes . 96.4 Lining with cured-in-place pipes . 116.5 Lining with discrete pipes 146.6 Lin

25、ing with adhesive-backed hoses . 166.7 Lining with spirally-wound pipes 186.8 Lining with pipe segments . 206.9 Lining with a rigidly anchored plastics inner layer 226.10 Lining with sprayed polymeric materials . 236.11 Lining with inserted hoses. 257 Classification of trenchless replacement techniq

26、ues 267.1 General 267.2 Pipe bursting 267.3 Pipe removal 297.3.1 General. 297.3.2 Pipe eating 297.3.3 Pipe extraction 297.4 Horizontal directional drilling HDD . 317.5 Impact moling . 347.6 Pipe jacking . 357.6.1 General. 357.6.2 Auger boring .357.6.3 Microtunnelling .368 Information on design .388.

27、1 General 388.2 Condition assessment 388.2.1 General. 388.2.2 Pipeline condition affecting functional performance .398.2.3 Site conditions affecting design . 408.3 System functions 408.3.1 Renovation . 408.3.2 Replacement . 418.4 Performance criteria . 418.4.1 Structural performance. 418.4.2 Hydraul

28、ic performance .458.5 Other factors affecting technique family selection .459 Aspects affecting installation .469.1 Site conditions affecting installation . 469.1.1 Working space requirements . 469.1.2 Environmental impact .469.1.3 Assessment of site conditions . 479.2 Work preparatory for installat

29、ion . 47 ISO 2017 All rights reserved iiiContents PageBS EN ISO 11295:2017ISO 11295:2017(E)9.2.1 General. 479.2.2 Location of existing pipeline system .479.2.3 Dimensions of existing pipeline system .489.2.4 Provision for maintenance of pipeline service .489.2.5 Preparation of existing pipeline 48Bi

30、bliography .49iv ISO 2017 All rights reservedBS EN ISO 11295:2017ISO 11295:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through

31、 ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborate

32、s closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular, the different approval cri

33、teria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject o

34、f patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name

35、 used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to

36、the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see the following URL: www.iso.org/iso/foreword.html.This document was prepared by ISO/TC 138 Plastics pipes, fittings and valves for the transport of fluids, Subcommittee SC 8, Rehabilitation of pipeline systems

37、.This second edition cancels and replaces the first edition (ISO 11295:2010), which has been technically revised.This edition includes the following significant changes with respect to the previous edition: Clauses 3, 4, 5 and 6 have been technically revised; Clause 7 for the classification of repla

38、cement techniques has been added. ISO 2017 All rights reserved vBS EN ISO 11295:2017ISO 11295:2017(E)IntroductionThis document classifies the techniques used for the renovation and trenchless replacement of existing pipelines and gives information on the design and application of plastics piping sys

39、tems used for such rehabilitation.In recent years, the rehabilitation of pipeline systems has become increasingly important and will continue to be so.Pipeline systems are continuously required to satisfy physical, chemical, biochemical and biological demands. These demands depend on planning, mater

40、ial, construction, type and period of use.When pipeline systems become operational, proper system management has to be put in place. In addition to inspection and cleaning, rehabilitation of the pipeline can be required. Rehabilitation is carried out when there is a need to restore or upgrade the pe

41、rformance of a pipeline system. Rehabilitation can consist of repair, renovation or replacement.To coincide with the publication of ISO rehabilitation product standards for various application areas using methods other than renovation, the need to extend the scope of this document to include familie

42、s of trenchless replacement techniques was recognized.vi ISO 2017 All rights reservedBS EN ISO 11295:2017Classification and information on design and applications of plastics piping systems used for renovation and replacement1 ScopeThis document defines and describes families of techniques for the r

43、enovation and trenchless replacement (on or off the line of an existing pipeline) of non-pressure and pressure pipelines through the use of plastics pipes, including plastics composites formed in situ into pipes, fittings and ancillary components. It does not include new construction provided as net

44、work extension. For each technique family, it identifies areas of application including, but not limited to, underground drainage and sewerage, and underground water and gas supply networks.This document provides information on the principles of, but not the detailed methodologies for, the design of

45、 plastics piping systems used for renovation or trenchless replacement of existing pipelines, covering: existing pipeline and site conditions; functions of the new pipeline; structural performance; hydraulic performance; installation aspects and site impact; other factors affecting renovation or tre

46、nchless replacement technique selection.Necessary work on the existing pipeline prior to renovation and/or trenchless replacement is outside the scope of this document.This document provides information needed to determine viable options and for identification of the optimal technique with regard to

47、 a given set of rehabilitation objectives.NOTE It is the responsibility of the designer to choose and design the renovation or trenchless replacement system.It does not specify the calculation methods to determine, for each viable technique, the required amount of lining or replacement pipe material

48、 needed to secure the desired performance of the rehabilitated pipeline.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undat

49、ed references, the latest edition of the referenced document (including any amendments) applies.ISO 1043-1, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their special characteristics3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 1043-1 and the following apply.INTERNATIONAL STANDARD ISO 11295:2017(E) ISO 2017 All rights reserved 1BS EN ISO 11295:2017ISO 11295:2017(E)ISO and IEC maintain terminological databases for use in standardization at the following addr