EN ISO 11297-1-2013 en Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1 General《地下排水和压力下污水网翻新用塑料管道系统 第1部分 总论》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11297-1:2013Plastics piping systems forrenovation of undergrounddrainage and seweragenetworks under pressure -Part 1: GeneralBS EN ISO 11297-1:2013 BRITISH STANDARDNati

2、onal forewordThis British Standard is the UK implementation of EN ISO11297-1:2013.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/88/3, Rehabilitation of pipeline systems using plasticspiping materials and components.A list of organizations represented on this committ

3、ee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 77821 6ICS 23.040.20; 2

4、3.040.45; 91.140.80; 93.030Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME

5、 EUROPENNE EUROPISCHE NORM EN ISO 11297-1 May 2013 ICS 23.040.45; 23.040.20; 91.140.80; 93.030 English Version Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2013) Systmes de canalisations en plastique pour la rnovat

6、ion des rseaux de branchements et de collecteurs dassainissement enterrs sous pression - Partie 1: Gnralits (ISO 11297-1:2013) Kunststoff-Rohrleitungssysteme fr die Renovierung von erdverlegten Abwasserdruckleitungen - Teil 1: Allgemeines (ISO 11297-1:2013) This European Standard was approved by CEN

7、 on 18 April 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards m

8、ay be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified

9、 to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icelan

10、d, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre:

11、Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11297-1:2013: EBS EN ISO 11297-1:2013EN ISO 11297-1:2013 (E) 3 Foreword This document (EN ISO 11297-1:2013) has been prepared by Technical C

12、ommittee ISO/TC 138 “Plastics pipes, fittings and valves for the transport of fluids“ in collaboration with Technical Committee CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, e

13、ither by publication of an identical text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn at the latest by November 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN

14、 and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus,

15、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kin

16、gdom. Endorsement notice The text of ISO 11297-1:2013 has been approved by CEN as EN ISO 11297-1:2013 without any modification. BS EN ISO 11297-1:2013ISO 11297-1:2013(E) ISO 2013 All rights reserved iiiContents PageForeword vIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions .

17、 13.1 General . 13.2 Techniques 33.3 Characteristics . 43.4 Materials . 53.5 Product stages . 63.6 Service conditions 63.7 Joints 74 Symbols and abbreviated terms . 74.1 Symbols . 74.2 Abbreviated terms . 85 Pipes at the “M” stage 85.1 Materials . 85.2 General characteristics . 85.3 Material charact

18、eristics . 85.4 Geometric characteristics 85.5 Mechanical characteristics 85.6 Physical characteristics . 85.7 Jointing . 85.8 Marking . 96 Fittings at the “M” stage . 96.1 Materials . 96.2 General characteristics . 96.3 Material characteristics . 96.4 Geometric characteristics 96.5 Mechanical chara

19、cteristics 96.6 Physical characteristics . 96.7 Jointing 106.8 Marking 107 Ancillary components 108 Fitness for purpose of the installed lining system at the “I” stage .108.1 Materials 108.2 General characteristics 108.3 Material characteristics 118.4 Geometric characteristics . 118.5 Mechanical cha

20、racteristics. 118.6 Physical characteristics 128.7 Additional characteristics . 128.8 Sampling 129 Installation practice .129.1 Preparatory work 129.2 Storage, handling and transport of pipes and fittings 129.3 Equipment 129.4 Installation . 139.5 Process-related inspection and testing . 149.6 Linin

21、g termination 149.7 Reconnection to the existing pipeline system . 14BS EN ISO 11297-1:2013ISO 11297-1:2013(E)iv ISO 2013 All rights reserved9.8 Final inspection and testing 149.9 Documentation 14Bibliography .15BS EN ISO 11297-1:2013ISO 11297-1:2013(E)ForewordISO (the International Organization for

22、 Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the

23、right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.Internation

24、al Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as

25、an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 1

26、1297-1 was prepared by Technical Committee ISO/TC 138, Plastics pipes, fittings and valves for the transport of fluids.ISO 11297 consists of the following parts, under the general title Plastics piping systems for renovation of underground drainage and sewerage networks under pressure: Part 1: Gener

27、al Part 3: Lining with close-fit pipesLining with continuous pipes is to form the subject of a future part 2; lining with cured-in-place pipes is to form the subject of a future part 4; lining with discrete pipes is to form the subject of a future part 5; and lining with adhesive-backed hoses is to

28、form the subject of a future part 6. ISO 2013 All rights reserved vBS EN ISO 11297-1:2013ISO 11297-1:2013(E)IntroductionThis part of ISO 11297 is a part of a System Standard for plastics piping systems of various materials used for the renovation of existing pipelines in a specified application area

29、. System Standards for renovation deal with the following applications: Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks; Plastics piping systems for renovation of underground drainage and sewerage networks under pressure; Plastics piping systems for

30、renovation of underground water supply networks; Plastics piping systems for renovation of underground gas supply networks;These System Standards are distinguished from those for conventionally installed plastics piping systems by the requirement to verify certain characteristics in the as-installed

31、 condition, after site processing. This is in addition to specifying requirements for plastics piping system components as manufactured.Each of the System Standards comprises a: Part 1: Generaland all applicable renovation technique family-related parts from the following: Part 2: Lining with contin

32、uous pipes Part 3: Lining with close-fit pipes Part 4: Lining with cured-in-place pipes Part 5: Lining with discrete pipes Part 6: Lining with adhesive-backed hosesThe requirements for any given renovation technique family are specified in part 1, applied in conjunction with the relevant other part.

33、 For example, this part of ISO 11297 and ISO 11297-3 specify the requirements relating to lining with close-fit pipes. For complementary information, see ISO 11295. Not all technique families are pertinent to every area of application and this is reflected in the part numbers included in each System

34、 Standards.A consistent structure of clause headings has been adopted for all parts of ISO 11297, in order to facilitate direct comparisons across renovation technique families.Figure 1 shows the common part and clause structure and the relationship between ISO 11297 and the System Standards for oth

35、er application areas.vi ISO 2013 All rights reservedBS EN ISO 11297-1:2013ISO 11297-1:2013(E)Applicationssewerage networks System standardsPart 1: GeneralPart 2: Lining with continuous pipesPart 3: Lining with close-g976it pipesPart 4: Lining with cured-in-place pipesPart 5: Lining with discrete pip

36、esPart 6: Lining with adhesive-backed hosesClause 1: ScopeClause 2: Normative referencesClause 3: Terms and deg976initionsClause 4: Symbols and abbreviated termsClause 5: Pipes at the “M“ stageClause 6: Fittings at the “M“ stageClause 7: Ancillary componentsClause 8: Fitness for purpose of the insta

37、lled lining system at the “I” stageClause 9: Installation practiceISO 11296ISO 11298ISO 11299Plastics piping systemsRenovationISO 11297Drainage and sewerage networks under pressureWater supply networksGas supply networksNon-pressure drainage andFigure 1 Format of the renovation System Standards ISO

38、2013 All rights reserved viiBS EN ISO 11297-1:2013BS EN ISO 11297-1:2013Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 1: General1 ScopeThis part of ISO 11297 specifies the requirements and test methods for plastics piping systems intended to

39、 be used for the renovation of underground drainage and sewerage networks under pressure. It is applicable to pipes and fittings, as manufactured, as well as to the installed lining system. It is not applicable to cover sprayed coatings, the existing pipeline or any annular filler.This part of ISO 1

40、1297 gives the general requirements common to all relevant renovation techniques.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undate

41、d references, the latest edition of the referenced document (including any amendments) applies.EN 681-1, Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber3 Terms and definitionsFor the purposes of this document, the followi

42、ng terms and definitions apply.3.1 General3.1.1pipeline systeminterconnecting pipe network for the conveyance of fluids3.1.2rehabilitationall measures for restoring or upgrading the performance of an existing pipeline system3.1.3renovationwork incorporating all or part of the original fabric of the

43、pipeline, by means of which its current performance is improved3.1.4replacementrehabilitation of an existing pipeline system by the installation of a new pipeline system, without incorporating the original fabric3.1.5maintenancekeeping an existing pipeline system operational without the installation

44、 of additional fabricINTERNATIONAL STANDARD ISO 11297-1:2013(E) ISO 2013 All rights reserved 1BS EN ISO 11297-1:2013ISO 11297-1:2013(E)3.1.6repairrectification of local damage3.1.7lining pipepipe inserted for renovation purposes3.1.8linerlining pipe after installation3.1.9lining systemlining pipe an

45、d all relevant fittings for insertion into an existing pipeline for the purposes of renovation3.1.10renovated pipeline systemexisting pipeline system plus the installed lining system used to renovate it, as well as any grout or other annular filling material used3.1.11characteristicproperty, dimensi

46、on or other feature of a material or component3.1.12declared valuelimiting value of a characteristic declared in advance by the lining system supplier, which becomes the requirement for the purposes of assessment of conformity3.1.13annular fillermaterial for grouting annular space between existing p

47、ipeline and lining system3.1.14groutingprocess of filling voids around the lining system3.1.15system test pressureSTPhydrostatic pressure applied to the installed pipeline system in order to ensure its integrity and leaktightness3.1.16simulated installationinstallation of a lining system into a simu

48、lated host pipeline, using representative equipment and processes, to provide samples for testing which are representative of an actual installation3.1.17simulated host pipelinesection of pipeline, which is not part of an operational network, but which replicates the environment of an operational ne

49、twork3.1.18technique familygroup of renovation techniques which are considered to have common characteristics for standardization purposes2 ISO 2013 All rights reservedBS EN ISO 11297-1:2013ISO 11297-1:2013(E)3.1.19independent pressure pipe linerliner which is capable on its own of resisting without failure all applicable internal loads throughout its design life3.1.20interactive pressure pipe linerliner which relies on the host pipe for some measure of radial support in order to resist without failure all applicable internal load