EN ISO 11299-1-2013 7500 Plastics piping systems for renovation of underground gas supply networks - Part 1 General [Superseded CEN EN 14408-1]《地下供气网络翻新用塑料管道系统 第1部分 总论》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11299-1:2013Plastics piping systems for r e n o v a t i o n o f u n d e r g r o u n d g a s supply networksPart 1: General (ISO 11299-1:2011)Copyright European Committe

2、e for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11299-1:2013. It is identical to ISO 11299-1

3、:2011. It supersedes BS EN 14408-1:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/88/3, Rehabilitation of pipeline systems using plasticspiping materials and components.A list of organizations represented on this committee can beobtained on re

4、quest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 79120 8 ICS 23.040.20; 23.040.45; 75.200 C

5、ompliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013. Amendments issued since publication Date Text affectedCopyright European Committee for Standardization

6、Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11299-1 February 2013 ICS 23.040.20; 23.040.45; 75.200 Supersedes EN 14408-1:2004English Version Plastics piping systems f

7、or renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2011) Systmes de canalisations en plastique pour la rnovation des rseaux de gaz enterrs - Partie 1: Gnralits (ISO 11299-1:2011) Kunststoff-Rohrleitungssysteme fr die Renovierung von erdverlegten Gasversorgungsnetzwerken

8、- Teil 1: Allgemeines (ISO 11299-1:2011) This European Standard was approved by CEN on 5 February 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

9、 Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tr

10、anslation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin

11、land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZAT

12、ION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11299-1:2013: ECopyright European Committee for Standar

13、dization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013EN ISO 11299-1:2013 (E) 3 Foreword The text of ISO 11299-1:2011 has been prepared by Technical Committee ISO/TC 138 “Plastics pipes, fittingsand val

14、ves for the transport of fluids” of the International Organization for Standardization (ISO) and has beentaken over as EN ISO 11299-1:2013 by Technical Committee CEN/TC 155 “Plastics piping systems andducting systems” the secretariat of which is held by NEN. This European Standard shall be given the

15、 status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn atthe latest by August 2013. Attention is drawn to the possibility that some of the elements of this document may be the su

16、bject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 14408-1:2004. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement th

17、is European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia,

18、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11299-1:2011 has been approved by CEN as EN ISO 11299-1:2013 without any modification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repr

19、oduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013ISO 11299-1:2011(E)Contents PageForeword .vIntroduction .vi1 Scope 12 Normative references .13 Terms and definitions .13.1 General .13.2 Techniques 33.3 Characteristics .43.4 Materials .53.5 Product stages .53.6 Serv

20、ice conditions 64 Symbols and abbreviated terms .64.1 Symbols .64.2 Abbreviated terms .65 Pipes at the “M” stage .65.1 Materials .65.2 General characteristics 65.3 Material characteristics .75.4 Geometric characteristics .75.5 Mechanical characteristics .75.6 Physical characteristics 75.7 Jointing 7

21、5.8 Marking .76 Fittings at the “M” stage 76.1 Materials .76.2 General characteristics 86.3 Material characteristics .86.4 Geometric characteristics .86.5 Mechanical characteristics .86.6 Physical characteristics 86.7 Jointing 86.8 Marking .87 Ancillary components 88 Fitness for purpose of the insta

22、lled lining system at the “I” stage .98.1 Materials .98.2 General characteristics 98.3 Material characteristics .98.4 Geometric characteristics .98.5 Mechanical characteristics .98.6 Physical characteristics 108.7 Additional characteristics .108.8 Sampling 109 Installation practice 109.1 Preparatory

23、 work .109.2 Storage, handling and transport of pipes and fittings 109.3 Equipment .109.4 Installation .119.5 Process-related inspection and testing 119.6 Lining termination .119.7 Reconnecting to the existing pipeline system 129.8 Transfer of service lines 12 ISO 2011 All rights reserved iiiCopyrig

24、ht European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013ISO 11299-1:2011(E)9.9 Final inspection and testing .129.10 Documentation .12Bibliography .13iv ISO 2011 All rights

25、 reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013ForewordISO (the International Organization for Standardization) is a worldwide federation of natio

26、nal standards bodies(ISO member bodies). The work of preparing International Standards is normally carried out through ISOtechnical committees. Each member body interested in a subject for which a technical committee has beenestablished has the right to be represented on that committee. Internationa

27、l organizations, governmental andnon-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the InternationalElectrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules giv

28、en in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standardsadopted by the technical committees are circulated to the member bodies for voting. Publication as anInternational Standard requires approval by at least 75

29、% of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 11299-1 was prepared by Technical Committee ISO/TC 138, Plast

30、ics pipes, fittings and valves for the transport of fluids.ISO 11299 consists of the following parts, under the general title Plastics piping systems for renovation of underground gas supply networks: Part 1: General Part 3: Lining with close-fit pipesISO 11299-1:2011(E) ISO 2011 All rights reserved

31、 vCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013IntroductionThis part of ISO 11299 is a part of a system standard for plastics piping systems of various m

32、aterials used forthe renovation of existing pipelines in a specified application area. System standards for renovation deal withthe following applications: plastics piping systems for renovation of underground non-pressure drainage and sewerage networks; plastics piping systems for renovation of und

33、erground drainage and sewerage networks under pressure; plastics piping systems for renovation of underground water supply networks; plastics piping systems for renovation of underground gas supply networks (this application).These system standards are distinguished from those for conventionally ins

34、talled plastics piping systemsbecause they set requirements for certain characteristics in the as-installed condition, after site processing.This is in addition to specifying requirements for system components, as manufactured.Each of the system standards comprises a Part 1: General (this document)

35、and all applicable parts relating tothe renovation technique family, from the following: Part 2: Lining with continuous pipes Part 3: Lining with close-fit pipes Part 4: Lining with cured-in-place pipes Part 6: Lining with adhesive-backed hosesThe requirements for any given renovation technique fami

36、ly are specified in this part of ISO 11299 and areapplied in conjunction with the other relevant parts. For example, both this part of ISO 11299 and ISO 11299-3specify the requirements relating to lining with close-fit pipes. For complementary information, see ISO 11295.Not all technique families ar

37、e pertinent to every area of application and this is reflected in the part numbersincluded in each system standard.A consistent structure of clause headings has been adopted for all parts in ISO 11299, in order to facilitatedirect comparisons across renovation technique families.Figure 1 illustrates

38、 the common part and clause structure and the relationship between ISO 11299 and thesystem standards for other application areas.ISO 11299-1:2011(E)vi ISO 2011 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or n

39、etworking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013Figure 1 Format of the renovation system standardsISO 11299-1:2011(E) ISO 2011 All rights reserved viiCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or network

40、ing permitted without license from IHS-,-,-BS EN ISO 11299-1:2013Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:2013INTERNATIONAL STANDARD ISO 11299-1:2011(E)P

41、lastics piping systems for renovation of underground gas supply networksPart 1: General1 ScopeThis part of ISO 11299 specifies the requirements and test methods for plastics piping systems for use in therenovation of underground gas supply networks. It is applicable to pipes and fittings as manufact

42、ured, as well asto the installed lining system. It is not applicable to sprayed coatings, the existing pipeline or any annular filler.This part of ISO 11299 establishes the general requirements common to all relevant renovation techniques.2 Normative referencesThere are no general normative referenc

43、es.NOTE See other parts of ISO 11299 for the normative references applicable to specific renovation technique families.3 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.3.1 General3.1.1pipeline systeminterconnecting pipe network for the conveyance of

44、 fluids3.1.2rehabilitationall measures for restoring or upgrading the performance of an existing pipeline system3.1.3renovationwork incorporating all or part of the original fabric of the pipeline by means of which its current performance isimproved3.1.4replacementrehabilitation of an existing pipel

45、ine system by the installation of a new pipeline system, without incorporatingthe original fabric3.1.5maintenancekeeping an existing pipeline system operational without the installation of additional fabric3.1.6repairrectification of local damage ISO 2011 All rights reserved 1Copyright European Comm

46、ittee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11299-1:20133.1.7lining pipepipe inserted for renovation purposes3.1.8linerlining pipe after installation3.1.9lining systemlining pipe and all

47、relevant fittings for insertion into an existing pipeline for the purposes of renovation3.1.10renovated pipeline systemexisting pipeline system plus the installed lining system used to renovate it, plus any grout or other annularfilling material used3.1.11characteristicproperty, dimension or other f

48、eature of a material or component3.1.12declared valuelimiting value of a characteristic declared in advance by the lining system supplier, which becomes therequirement for the purposes of assessment of conformity3.1.13annular fillermaterial for grouting annular space between existing pipeline and lining system3.1.14groutingprocess of filling voids around the lining system3.1.15system test pressureSTPhydrostatic pressure applied to the installed pipeline system in order to ensure its integrity and leak tightnessNOTE Expresse