EN ISO 12543-4-2011 en Glass in building - Laminated glass and laminated safety glass - Part 4 Test methods for durability《建筑玻璃 夹层玻璃和夹层安全玻璃 第4部分 耐久性试验方法》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 12543-4:2011Glass in building Laminatedglass and laminated safetyglassPart 4: Test methods for durability (ISO12543-4:2011)BS EN ISO 12543-4:2011 BRITISH STANDARDNation

2、al forewordThis British Standard is the UK implementation of EN ISO 12543-4:2011. It supersedes BS EN ISO 12543-4:1998 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/520/1, Basic and transformed glass products.A list of organizations represented on

3、this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 60144 6 ICS 81.040.20 Compliance with a British Standard cannot confer immuni

4、ty from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12543-4 August 2011 ICS 81.040.20

5、 Supersedes EN ISO 12543-4:1998English Version Glass in building - Laminated glass and laminated safety glass -Part 4: Test methods for durability (ISO 12543-4:2011) Verre dans la construction - Verre feuillet et verre feuillet de scurit - Partie 4: Mthodes dessai concernant la durabilit (ISO 12543-

6、4:2011) Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 4: Verfahren zur Prfung der Bestndigkeit (ISO 12543-4:2011) This European Standard was approved by CEN on 6 August 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions

7、for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in th

8、ree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards b

9、odies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

10、Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12543-4:201

11、1: EBS EN ISO 12543-4:2011EN ISO 12543-4:2011 (E) 3 Foreword This document (EN ISO 12543-4:2011) has been prepared by Technical Committee ISO/TC 160 “Glass in building“ in collaboration with Technical Committee CEN/TC 129 “Glass in building” the secretariat of which is held by NBN. This European Sta

12、ndard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2012, and conflicting national standards shall be withdrawn at the latest by February 2012. Attention is drawn to the possibility that some of the elements

13、of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 12543-4:1998. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

14、 countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

15、 Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 12543-4:2011 has been approved by CEN as a EN ISO 12543-4:2011 without any modification. BS EN ISO 12543-4:2011ISO 12543-4:2011(E) ISO 2011 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Nor

16、mative references1 3 Terms and definitions .1 4 Test specimens1 5 High-temperature test .2 6 Humidity tests3 7 Radiation tests.4 Annex A (informative) Possible arrangement of the test apparatus for the radiation test described in 7.3.1.8 Annex B (informative) Lamp 10 Bibliography11 BS EN ISO 12543-4

17、:2011ISO 12543-4:2011(E) iv ISO 2011 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees

18、. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Intern

19、ational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Sta

20、ndards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subj

21、ect of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 12543-4 was prepared by Technical Committee ISO/TC 160, Glass in building, Subcommittee SC 1, Product considerations. This second edition cancels and replaces the first edition (ISO 12543-4:199

22、8), which has been technically revised. ISO 12543 consists of the following parts, under the general title Glass in building Laminated glass and laminated safety glass: Part 1: Definitions and description of component parts Part 2: Laminated safety glass Part 3: Laminated glass Part 4: Test methods

23、for durability Part 5: Dimensions and edge finishing Part 6: Appearance BS EN ISO 12543-4:2011INTERNATIONAL STANDARD ISO 12543-4:2011(E) ISO 2011 All rights reserved 1Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability 1 Scope This part of ISO 12543 speci

24、fies test methods in respect of resistance to high temperature, humidity and radiation for laminated glass and laminated safety glass for use in building. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the

25、edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 9050, Glass in building Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazi

26、ng factors ISO 12543-1, Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts ISO 12543-2, Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass ISO 12543-3, Glass in building Laminated glass and lami

27、nated safety glass Part 3: Laminated glass 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 12543-1 and ISO 12543-2 apply. 4 Test specimens Test specimens should be representative of standard production. Test specimens shall either be specially manufa

28、ctured to the test size or be cut from larger panes. Test specimens with cut edges shall contain at least one edge from the original pane from which it was cut. The original edge should be marked. If the final product has all its edges sealed/protected, the test specimen shall also have all its edge

29、s sealed/protected. The method of supporting the test specimen shall not cover two edges of the test specimen. If the test specimen is cut from a larger pane at least one original edge shall not be covered. BS EN ISO 12543-4:2011ISO 12543-4:2011(E) 2 ISO 2011 All rights reservedTest specimens shall

30、be inspected prior to the test at a distance between 300 mm and 500 mm in front of a white diffuse background. Only samples free of faults (i.e. bubbles, delamination, cloudiness) shall be used for the test. 5 High-temperature test 5.1 Principle The purpose of this test is to determine whether the l

31、aminated glass and laminated safety glass are able to withstand exposure to high temperatures over an extended period of time without their properties becoming substantially altered. The changes in properties are judged by the occurrence of bubbles, delamination and cloudiness (not discoloration). 5

32、.2 Size and number of test specimens The test specimens shall not be smaller than 300 mm 100 mm. There shall be three test specimens. 5.3 Procedures 5.3.1 General The high-temperature test may be carried out using either an oven or boiling water. The test temperature is 100 C. The tolerances of the

33、test temperature depend on the test method used and are as follows: a) Oven (100 2) C b) Boiling water 100 (02+) C To remove the risk of thermal breakage in the boiling water, test samples should be placed in water at 60 C for 10 min before transferring to the water at 100 C. 5.3.2 Procedure A Heat

34、the three test specimens to a temperature of 100 C. In an oven, the heating-up time is dependent on the load, type and thickness of the laminated glass being tested. Generally speaking, this should be assumed to be 30 min. Maintain the test temperature for a period of 16 h. Take the test specimens o

35、ut and allow them to cool to room temperature by storing them vertically under natural convection and radiation. The assessment of the test samples may be carried out when the glass surface temperature is lower than 30 C. 5.3.3 Procedure B Heat the three test specimens to a temperature of 100 C. Hea

36、ting-up time is dependent on the type and thickness of the laminated glass being tested. Generally speaking, for samples up to 11 mm thickness this should be assumed to be 30 min. For thick samples, i.e. greater than 11 mm, this shall be determined by calibration. Maintain the test temperature for a

37、 period of 2 h. BS EN ISO 12543-4:2011ISO 12543-4:2011(E) ISO 2011 All rights reserved 3Take the test specimens out and allow them to cool to room temperature by storing them vertically under natural convection and radiation. The assessment of the test samples may be carried out when the glass surfa

38、ce temperature is lower than 30 C. 5.4 Expression of results Inspect the samples at a distance between 300 mm and 500 mm in front of a white diffuse background. Record the number and extent of the faults occurring in test specimen. NOTE Bubbles, delamination, haze and cloudiness indicate faults, but

39、 discoloration does not. Disregard all faults within 15 mm from an original edge and 20 mm from a cut edge. Individual bubbles in the immediate vicinity of inlaid wires are permissible. Disregard a test specimen showing cracks, and perform the test on a new test specimen in its place. 5.5 Test repor

40、t The following information shall be given in the test report: a) reference to this part of ISO 12543, i.e. ISO 12543-4:2011; b) test procedure used: A (see 5.3.2) or B (see 5.3.3); c) type and structure of the laminated glass or laminated safety glass, with nominal thickness of the individual const

41、ituents, in millimetres; d) type of test specimens, including cut or special manufacture; type of edge; edge protection; dimensions; e) unsupported and supported edges by the test frame; f) for each test specimen, the number and size of the bubbles, delamination, haze or cloudiness occurring. 6 Humi

42、dity tests 6.1 Principle The purpose of this test is to determine whether the laminated glass and laminated safety glass are able to withstand the effects of humidity in the atmosphere over an extended period of time without their properties becoming substantially altered. The effects of the humidit

43、y are judged by bubbles, delamination, haze or cloudiness. 6.2 Size and number of test specimens The test specimens shall not be smaller than 300 mm 100 mm. There shall be three test specimens. 6.3 Procedures 6.3.1 Test with condensation Keep the three test specimens vertically over water in a close

44、d container for two weeks. Maintain the temperature of the air in the container at 5050+C. Adequate spacing between the test specimens shall be provided. BS EN ISO 12543-4:2011ISO 12543-4:2011(E) 4 ISO 2011 All rights reservedNOTE These conditions give a relative humidity of about 100 % and lead to

45、water condensing on the surface of the test specimen. 6.3.2 Test without condensation Keep the three test specimens vertically for two weeks in a climate chamber and keep the temperature of the air in the container at 5050+C and the relative humidity within the limits of (80 5) %. Adequate spacing b

46、etween the test specimens shall be provided. 6.4 Expression of results Inspect the samples at a distance between 300 mm and 500 mm in front of a white diffuse background. Record the number and extent of the faults occurring in the interlayer (bubbles, delamination, haze and cloudiness) for each test

47、 specimen. Disregard all faults within 15 mm from an original edge, 20 mm from a cut edge or 10 mm from any crack. Individual bubbles in the immediate vicinity of inlaid wires are permissible. In the case of fire-resistant laminated glass and fire-resistant laminated safety glass, only delamination

48、shall be considered as a fault. NOTE The interlayers of fire-resistant laminated glass and fire-resistant laminated safety glass are designed to react at high temperatures. The exposure of test specimens of those glasses to the temperature reached in the humidity test over a long period of time may

49、create bubbles, haze and cloudiness in the interlayer which do not affect the fire-resistant properties so that only delamination will be considered. 6.5 Test report The following information shall be given in the test report: a) reference to this part of ISO 12543, i.e. ISO 12543-4:2011; b) test procedure (6.3.1 or 6.3.2); c) type and structure of the laminated glass or laminated safety glass, with nominal thickness of the individual constituents, in millimetres; d) type of test specimens, incl