EN ISO 12625-3-2014 en Tissue paper and tissue products - Part 3 Determination of thickness bulking thickness and apparent bulk density and bulk《卫生纸及其制品 第3部分 厚度 层积厚度和表观密度的测定(ISO 12.pdf

1、BSI Standards PublicationBS EN ISO 12625-3:2014Tissue paper and tissueproductsPart 3: Determination of thickness, bulkingthickness and apparent bulk density andbulkBS EN ISO 12625-3:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO12625-3:2014. It superse

2、des BS EN ISO 12625-3:2005 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PAI/11, Methods of test for paper, board and pulps.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purpo

3、rt to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 80937 8ICS 85.080.20Compliance with a British Standard cannot confer immunity fromlegal obligations.

4、This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 April 2014.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 12625-3 April 2014 ICS 85.060 Supersedes EN ISO 12625-3:2005English Ver

5、sion Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014) Papier tissue et produits tissue - Partie 3: Dtermination de lpaisseur, de lpaisseur moyenne dune feuille en liasse et de la masse volumique moyenne et

6、de la main (ISO 12625-3:2014) Tissue-Papier und Tissue-Produkte - Teil 3: Bestimmung der Dicke, der Blattdicke im Stapel, der scheinbaren Stapeldichte und des spezifischen Volumens (ISO 12625-3:2014) This European Standard was approved by CEN on 15 February 2014. CEN members are bound to comply with

7、 the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Manage

8、ment Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same stat

9、us as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta

10、, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CEN

11、All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 12625-3:2014 EBS EN ISO 12625-3:2014EN ISO 12625-3:2014 (E) 3 Foreword This document (EN ISO 12625-3:2014) has been prepared by Technical Committee ISO/TC 6 “Paper, board and pulps“ i

12、n collaboration Technical Committee EN ISO 12625-3:2014 by Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the lat

13、est by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all

14、such patent rights. This document supersedes EN ISO 12625-3:2005. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Es

15、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice Th

16、e text of ISO 12625-3:2014 has been approved by CEN as EN ISO 12625-3:2014 without any modification. BS EN ISO 12625-3:2014ISO 12625-3:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction vi1 Scope . 12 Normative references 13 Terms and definitions . 14 Principle 25 Apparatus

17、 . 25.1 Precision dead-weight micrometer . 25.2 Gauge blocks . 35.3 Balance and attachments . 36 Conditioning 37 Preparation of test pieces . 37.1 General . 37.2 Single-ply thickness 37.3 Single-ply sheet thickness . 37.4 Bulking thickness 38 Procedure. 49 Calculation 49.1 Single-ply thickness 49.2

18、Single sheet thickness . 49.3 Bulking thickness 49.4 Apparent bulk density 49.5 Bulk (apparent specific bulk volume) . 510 Test report . 5Annex A (informative) Precision . 6Annex B (normative) Measurement conditions 8Annex C (informative) Foot pressure 10Bibliography .11BS EN ISO 12625-3:2014ISO 126

19、25-3:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject fo

20、r which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on

21、all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted.

22、This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any

23、or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of user

24、s and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementar

25、y information.ISO 12625-3 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 172, Pulp, paper and board in collaboration with Technical Committee ISO/TC 6, Paper, board and pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board,

26、 in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second. edition cancels and replaces the first edition (ISO 12625-3:2005), which has been technically revised.With regard to ISO 12625-3:2005, the following minor changes have been made:a) title ch

27、anged; “bulk” added;b) the accuracy data in Annex A were adjusted to the existing equipment capabilities and calibration procedures;,c) preparation of test pieces more precisely described, 7.1 and 7.4 reformulated;d) editorial updating.ISO 12625 consists of the following parts, under the general tit

28、le Tissue paper and tissue products Part 1: General guidance on terms; Part 3: Determination of thickness, bulking thickness, apparent bulk density and bulk Part 4: Determination of tensile strength, stretch at break and tensile energy absorption; Part 5: Determination of wet tensile strength; Part

29、6: Determination of grammage; Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight); Part 8: Water-absorption time and water-absorption capacity; basket-immersion test method;iv ISO 2014 All rights reservedBS EN ISO 12625-3:2014ISO 12625-3:20

30、14(E) Part 9: Determination of ball burst strength; Part 11: Determination of wet ball burst strength; Part 12:Determination of tensile strength of perforated lines Calculation of perforation efficiency; Part 15 Determination of optical properties Measurement of brightness and colour with C/2 (indoo

31、r daylight) illuminant; Part 16 Determination of optical properties Opacity (paper backing) Diffuse reflectance method ISO 2014 All rights reserved vBS EN ISO 12625-3:2014ISO 12625-3:2014(E)IntroductionThickness is an important property of tissue paper and tissue products.In the tissue industry, thi

32、ckness-related parameters, such as the roll diameter of rolled products (kitchen towel) or the stack height of folded products (paper towels) are often measured. However, the fact that not only end-use tissue products, but also the base tissue paper from which these products are made, is the subject

33、 of trade between companies and countries, means that there is a genuine need for a consistent measure of thickness that can be applied to tissue products at any stage of their manufacture.The thickness of tissue paper and tissue products is known to be dependent on the pressure applied to the mater

34、ial at the time of measurement. Several different loading pressures, pressure-foot diameters and loading speeds have been used within the tissue industry. This part of ISO 12625 has been prepared by harmonizing those standards applicable to tissue and tissue products currently in use. It specifies a

35、 single loading pressure, foot diameter and loading speed to be used for all thickness measurements of tissue and tissue products.It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should be applied according to ISO 15755.For the determination

36、of moisture content in tissue paper and tissue products, ISO 287 or ISO 638 should be applied.vi ISO 2014 All rights reservedBS EN ISO 12625-3:2014INTERNATIONAL STANDARD ISO 12625-3:2014(E)Tissue paper and tissue products Part 3: Determination of thickness, bulking thickness and apparent bulk densit

37、y and bulk1 ScopeThis part of ISO 12625 specifies a test method for the determination of thickness and bulking thickness and the calculation of apparent bulk density and bulk of tissue papers and tissue products under a pressure of 2,0 kPa.NOTE This part of ISO 12625 has been developed to provide a

38、consistent test method for the determination of thickness and density of tissue paper and tissue products. Corresponding test methods for paper and board in general are covered in ISO 534.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document

39、and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 186, Paper and board Sampling to determine average qualityISO 187, Paper, board and pulps Stan

40、dard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samplesISO 12625-1, Tissue paper and tissue products Part 1: General guidance on termsISO 12625-6, Tissue paper and tissue products Part 6: Determination of grammage3 Terms and definitionsFor

41、 the purposes of this document, the terms and definitions given in ISO 12625-1 and the following apply.3.1single-ply thicknessdistance between the two principal surfaces of a single ply of tissue paper measured under the applied static load specified in this part of ISO 12625Note 1 to entry: A ply o

42、f tissue is an unlaminated tissue, like that made directly from a tissue machine.3.2single sheet thicknessdistance between the two principal surfaces of a single sheet of tissue product measured under the applied static load specified in this part of ISO 12625Note 1 to entry: A sheet of tissue is a

43、laminated or unlaminated tissue like that present in the finished tissue product. ISO 2014 All rights reserved 1BS EN ISO 12625-3:2014ISO 12625-3:2014(E)3.3bulking thicknessthickness of a single sheet of tissue paper or tissue product, calculated from the thickness of several superimposed sheets, me

44、asured under the applied static load specified in this part of ISO 126253.4apparent bulk densitymass per unit volume of tissue paper or tissue product, calculated from its grammage and bulking thicknessNote 1 to entry: The apparent bulk density is expressed in grams per cubic centimetre.3.5bulk appa

45、rent specific bulk volumeinverse of densityNote 1 to entry: The bulk is expressed in cubic centimetres per gram.3.6grammagemass of a unit area of tissue paper or tissue product as determined by the procedure in ISO 12625-6Note 1 to entry: to entry The grammage is expressed in grams per square metre

46、(g/m2).4 PrincipleMeasurement of the thickness of a test piece of tissue paper sampled during the manufacturing process or of a tissue product supplied as a finished article. The measurement being made as the distance between a fixed reference plate on which the sample rests and a parallel pressure-

47、foot that exerts a specified load on the area under test.5 Apparatus5.1 Precision dead-weight micrometerThis has two parallel, horizontal faces, flat to within 0,003 mm, between which the test piece is placed. The lower face shall be fixed and the upper face (pressure-foot) moveable in a direction p

48、erpendicular to the plane of the fixed face.The upper, circular, pressure-foot shall have a diameter of (35,7 0,1) mm giving a nominal area of 10,0 cm2and shall be parallel to the lower face within limits defined in Annex B.3.The lower face shall be constructed to support the test piece such that th

49、e test piece lies flat while under test. In practice, the lower face should have minimum dimensions 20 % larger than the diameter of the pressure-foot. The pressure between the two faces shall be (2,0 0,1) kPa (see Annex C).The measuring speed shall be (2,0 0,2) mm/s.The instrument read-out/scale shall be graduated in increments of 0,001 mm.The opening between the pressure-foot and the lower face is set by agreement between the instrument supplier and the customer. For most thickness measurements, instruments with an