EN ISO 13766-2-2018 en Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2 Additional .pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supplyPart 2: Additional EMC requirements for functional safetyBS EN ISO 137662:2018Natio

2、nal forewordThis British Standard is the UK implementation of EN ISO 137662:2018. It is identical to ISO 137662:2018. Together with BS EN ISO 137661:2018, it supersedes BS EN 13309:2010, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee B/513/1, Earth mo

3、ving machinery (International).A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Instituti

4、on 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 88859 5ICS 33.100.01; 53.100Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments

5、/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 137662:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 13766-2June 2018ICS 33.100.01; 53.100 Supersedes EN 13309:2010EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NO

6、RMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 137662:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersEarthmoving and building construction machinery Electromagnetic compatibility (EMC) of machi

7、nes with internal electrical power supply Part 2: Additional EMC requirements for functional safety (ISO 137662:2018)Engins de terrassement et machines pour la construction des btiments Compatibilit lectromagntique (CEM) des machines quipes de rseaux lectriques de distribution interne Partie 2: Exig

8、ences CEM supplmentaires pour les fonctions de scurit (ISO 137662:2018)Baumaschinen Elektromagnetische Vertrglichkeit von Maschinen mit internem elektrischen Bordnetz Teil 2: Zustzliche EMVAnforderungen fr die funktionale Sicherheit (ISO 137662:2018)This European Standard was approved by CEN on 9 Ma

9、y 2018.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references concerning such national standards may be obtained

10、 on application to the CENCENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENE

11、LEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy

12、, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 13766-2:2018 (E)European forewordThis document (EN ISO 137662:2018) has been prepared by Technical Committee

13、 ISO/TC 127 “Earthmoving machinery“ in collaboration with Technical Committee CEN/TC 151 “Construction equipment and building material machines Safety” the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identic

14、al text or by endorsement, at the latest by December 2018, and conflicting national standards shall be withdrawn at the latest by December 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for

15、identifying any or all such patent rights.This document supersedes EN 13309:2010.This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(

16、s), see informative Annex ZA, which is an integral part of this document.According to the CENCENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denma

17、rk, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsem

18、ent noticeThe text of ISO 137662:2018 has been approved by CEN as EN ISO 137662:2018 without any modification.iiBS EN ISO 137662:2018ISO 13766-2:2018Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms, definitions and abbreviated terms 24 General principles . 35 EMC phenomena . 35.1

19、General . 35.1.1 Performance criteria for complete machines 45.1.2 Performance criteria for safetyrelevant ESA . 45.2 Immunity of machinery . 45.2.1 Immunity of machinery to radiated electromagnetic fields from off-board sources . 45.2.2 Immunity to radiated electromagnetic fields from on-board sour

20、ces 55.2.3 Immunity to electrical transients on supply and other lines of machinery 55.2.4 Immunity of machinery exposed to ESD . 55.3 Immunity of ESA 55.3.1 Immunity of ESA to radiated electromagnetic fields from off-board sources 55.3.2 Immunity of ESA to radiated electromagnetic fields by on-boar

21、d sources . 65.3.3 Immunity of ESA to electrical transients on lines . 65.3.4 Immunity of ESA exposed to ESD 66 Test report . 6Annex A (informative) Installation and maintenance aspects. 7Bibliography 8 ISO 2018 All rights reserved iiiContents PageBS EN ISO 137662:2018ISO 13766-2:2018ForewordISO (th

22、e International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committ

23、ee has been established has the right to be represented on that committee. International organizations, governmental and nongovernmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechni

24、cal standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in

25、 accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. D

26、etails of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an

27、 endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the foll

28、owing URL: www.iso.org/iso/foreword.html.The committee responsible for this document is ISO/TC 127, Earth-moving machinery, Subcommittee SC 2, Safety, ergonomics and general requirements.This first edition of ISO 13766-2:2018, together with ISO 13766-1:2018, cancels and replaces ISO 13766:2006, of w

29、hich it constitutes a technical revision and contains the following changes: the scope has been extended to specify building construction machinery as well as earthmoving machinery; the provisions have been brought up to date with technological change; normative references have been updated to the l

30、atest editions.A list of all parts in the ISO 13766 series can be found on the ISO website.iv ISO 2018 All rights reservedBS EN ISO 137662:2018ISO 13766-2:2018IntroductionThis document is a typeC standard as stated in ISO 12100:2010.This document is of relevance, in particular, for the following sta

31、keholder groups representing the market players with regard to machinery safety: machine manufacturers (small, medium and large enterprises); health and safety bodies (regulators, accident prevention organisations, market surveillance etc.)Others can be affected by the level of machinery safety achi

32、eved with the means of the document by the abovementioned stakeholder groups: machine users/employers (small, medium and large enterprises); machine users/employees (e.g. trade unions, organizations for people with special needs); service providers, e.g. for maintenance (small, medium and large ente

33、rprises); consumers (in case of machinery intended for use by consumers).The abovementioned stakeholder groups have been given the possibility to participate at the drafting process of this document.The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are

34、 covered are indicated in the Scope of this document.When requirements of this typeC standard are different from those which are stated in typeA or typeB standards, the requirements of this typeC standard take precedence over the requirements of the other standards for machines that have been design

35、ed and built according to the requirements of this typeC standard.With the increasing use of electronic devices in areas where earthmoving and construction machinery operates, there is a need to ensure that the machinery is provided with adequate immunity to electromagnetic disturbances. As more mac

36、hinery is fitted with electrical and electronic devices, it is also necessary to ensure that the internal electromagnetic interference caused by emissions of subsystems of the machinery itself (machine disturbance) does not exceed the immunity of the respective subsystems.The electrical and highfreq

37、uency disturbances covered by this document refer to electromagnetic effects caused due to technical appliances (manmade effects). These effects generally can be considered as singular ones and additionally are located and restricted to defined narrowly defined areas.While these effects on machinery

38、 cannot be considered as being general, their consequences on machinery still need to be taken into account. They might be generated within a large frequency range with different electrical characteristics or by conduction or radiation, and then imparted to other electrical/electronic devices and sy

39、stems by conduction or radiation. Narrowband, and sometimes broadband, signals generated by sources of interference inside or outside the machinery can also be coupled in electrical/electronic systems and influence the normal function of electrical/electronic devices.Electrostatic discharges are rel

40、evant to the machinery because control elements can be positioned outside the operator station where potential differences could emerge at contact points. Conducted transients in power supply wiring must be considered because the machinery can contain open systems, in which several devices or compon

41、ents can be combined to complement machine functionality.This document provides information on the kind and the level of effects as presently known. Indicative test methods and criteria can derive from these values, given that possible test levels acceptable for the machinery and, in the case of tes

42、ting conducted on a voluntary basis, considering the unique characteristics and operating parameters of the machinery. However, the functions of the machinery ISO 2018 All rights reserved vBS EN ISO 137662:2018ISO 13766-2:2018are not evaluated by testing alone. Functional safety with respect to EMC

43、phenomena can also be achieved by organizational measures on the job site where the machinery is located and in use.Because the machinery has a number of systems that consist of components that can be used on a variety of machine types, the approach of defining electrical/electronic sub-assemblies (

44、ESA) or separate ESAs for these components is applied for the immunity and emissions test methods. This allows these components to be evaluated by the test method in existing laboratory facilities consisting of specially equipped shielded rooms. When electrical/electronic subassembly tests are condu

45、cted, it is necessary to consider any additional effects imparted by wiring systems used to connect the subassemblies into the machinery. The tests can also be conducted on the machinery.Programmable electronic systems (PES) as defined in ISO 13849-1:2015 and intended for use as a safety-related par

46、t of a machine control system (SRP/CS) as defined in ISO 15998:2008 have a specification of intended functionality. If a disturbed function will become dangerous or not is sometimes unknown to the manufacturer of the PES because it depends on the future application in a safetyrelated system of the w

47、hole machine.Testing according to this document is required to be performed so that the behaviour of the PES in that safetyrelated system can be demonstrated.vi ISO 2018 All rights reservedBS EN ISO 137662:2018Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of

48、machines with internal electrical power supply Part 2: Additional EMC requirements for functional safety1 ScopeThis document provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the

49、following building construction machinery as classified in ISO/TR 12603:2010: drilling and foundation equipment; equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement; road construction and maintenance machinery and equipment.It deals with EMC requirements related to the functional safety of the machinery, its electrical/electronic subassemblies (ESA) and of separate ESA.This document is relevant only to the safety-related parts o