EN ISO 14114-2018 en Gas welding equipment - Acetylene manifold systems for welding cutting and allied processes - General requirements.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Gas welding equipment Acetylene manifold systems for welding, cutting and allied processes General requirements (ISO 14114:2017)BS EN ISO 14114:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14114 January

2、2018 ICS 25.160.30 Supersedes EN ISO 14114:2014English Version Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017) Matriel de soudage aux gaz - Centrales de dtente pour la distribution dactylne pour le soudage, le coupa

3、ge et les techniques connexes - Exigences gnrales (ISO 14114:2017) Gasschweigerte - Acetylenflaschen-Batterieanlagen fr Schweien, Schneiden und verwandte Verfahren - Allgemeine Anforderungen (ISO 14114:2017) This European Standard was approved by CEN on 29 October 2017. CEN members are bound to comp

4、ly with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

5、 Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sa

6、me status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg

7、, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040

8、 Brussels 2018 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14114:2018 ENational forewordThis British Standard is the UK implementation of EN ISO 14114:2018. It is identical to ISO 14114:2017. It supersedes BS EN ISO 14114:2

9、014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee WEE/18, Gas welding and cutting appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the neces

10、sary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 92398 2ICS 25.160.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard wa

11、s published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 14114:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14114 January 2018 ICS 25.160.30 Supersedes

12、EN ISO 14114:2014English Version Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - General requirements (ISO 14114:2017) Matriel de soudage aux gaz - Centrales de dtente pour la distribution dactylne pour le soudage, le coupage et les techniques connexes

13、- Exigences gnrales (ISO 14114:2017) Gasschweigerte - Acetylenflaschen-Batterieanlagen fr Schweien, Schneiden und verwandte Verfahren - Allgemeine Anforderungen (ISO 14114:2017) This European Standard was approved by CEN on 29 October 2017. CEN members are bound to comply with the CEN/CENELEC Intern

14、al Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any C

15、EN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official vers

16、ions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

17、Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CEN All rights

18、of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14114:2018 EBS EN ISO 14114:2018EN ISO 14114:2018 (E) 3 European foreword This document (EN ISO 14114:2018) has been prepared by Technical Committee ISO/TC 44 “Welding and allied processes“ in c

19、ollaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2018, and conflicting

20、national standards shall be withdrawn at the latest by July 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 141

21、14:2014. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Fr

22、ance, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14114:2017 has been approved by CEN

23、 as EN ISO 14114:2018 without any modification. BS EN ISO 14114:2018ISO 14114:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Design and materials . 44.1 Requirements for the manifold system and its components. 44.2 Materials of construction . 55 Tests . 55.1 Streng

24、th test 55.2 External gas tightness test 55.3 Decomposition blocker 56 Marking 67 Instructions for use . 6Annex A (normative) Configurations of acetylene manifold systems 7Annex B (normative) Acetylene decomposition test procedure for decomposition blocker .12 ISO 2017 All rights reserved iiiContent

25、s PageBS EN ISO 14114:2018ISO 14114:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member

26、body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electr

27、otechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of

28、ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held r

29、esponsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information gi

30、ven for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) princ

31、iples in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee SC 8, Equipment for gas welding, cutting and allied processes.This third edition cancels and rep

32、laces the second edition (ISO 14114:2014), which has been technically revised with the following changes:a) Clause 3 has been restructured;b) 4.1 has been revised;c) 5.3 has been revised;d) Clause 6 has been revised;e) Clause 7 has been revised;f) Table A.1 has been revised;g) Figures A.2 and A.4 ha

33、ve been revised and Figure A.5 has been deleted;h) the title of Annex B has been modified.Requests for official interpretations of any aspect of this document should be directed to the Secretariat of ISO/TC 44/SC 8 via your national standards body. A complete listing of these bodies can be found at

34、www.iso.org.iv ISO 2017 All rights reservedBS EN ISO 14114:2018INTERNATIONAL STANDARD ISO 14114:2017(E)Gas welding equipment Acetylene manifold systems for welding, cutting and allied processes General requirements1 ScopeThis document applies to acetylene cylinder manifold systems extending from the

35、 cylinder valve or the bundle outlet connections to the outlet connection of the main shut-off valve. It specifies requirements for design, materials and testing of cylinder manifold systems for the supply of acetylene for use in welding, cutting and allied processes.This document applies to acetyle

36、ne cylinder manifold systems in which acetylene single cylinders or acetylene bundles are coupled for collective gas withdrawal.NOTE National regulations exist regarding limitation of the amount of single cylinders/bundles of acetylene on a single location (e.g. in warehouse or connected to a manifo

37、ld system).This document also covers a test procedure for decomposition blockers.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies.

38、For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 5175 (all parts), Gas welding equipment Safety devicesISO 7291:2010, Gas welding equipment Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa

39、(300 bar). Amended by ISO 7291:2010/Amd 1:2015ISO 9090, Gas tightness of equipment for gas welding and allied processesISO 9539, Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes.ISO 10961, Gas cylinders Cylinder bundles Design, manufacture, testing and

40、inspectionISO 14113, Gas welding equipment Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)ISO 15296, Gas welding equipment Vocabulary Terms used for gas welding equipmentISO 15615:2013, Gas welding equipment Acetylene manifold systems for welding, cu

41、tting and allied processes Safety requirements in high-pressure devices3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 15296 and the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: I

42、SO Online browsing platform: available at https:/www.iso.org/obp IEC Electropedia: available at http:/www.electropedia.org/ ISO 2017 All rights reserved 1BS EN ISO 14114:2018ISO 14114:2017(E)3.1acetylene manifold systemsassembly of devices generally linking one or more gas sources coupled to a user

43、pipeline system, delivering a regulated pressure under specified safe conditionsNote 1 to entry: A manifold includes, for example, components like collectors, safety devices, and pressure regulators.3.2acetylene cylinder bundleacetylene cylinder packassembly of cylinders fastened together, interconn

44、ected by a manifold for collective filling and gas withdrawal, and intended to be transported as a single unit3.3manifold high pressure pipeworkpipework system extending from the outlet connection of acetylene cylinders or bundles at full charging pressure to the inlet of the pressure regulator, inc

45、luding as required hose assemblies or coiled metal pipes, piping and high pressure valves3.4flame arrestordevice which extinguishes a flame frontSOURCE: ISO 15296:2017, 3.4.3.3.5 Low pressure valvesNOTE Low pressure is considered as P 1,5 bar (0,15 MPa), given as gauge pressure.3.5.1temperature-sens

46、itive cut-off valvedevice that stops the gas flow when a predetermined temperature is reachedSOURCE: ISO 15296:2017, 3.4.5, modified “reached” has replaced “exceeded”.3.5.2pressure-sensitive cut-off valvedevice that stops the gas flow when the downstream pressure is higher than the upstream pressure

47、 by more than a prede termined valueSOURCE: ISO 15296:2017, 3.4.6.3.5.3main shut-off valvemain valve downstream of the manifold system3.5.4pressure limiting devicedevice which limits the pressure downstream of the manifold regulator in the event of regulator failure or malfunction3.5.5low pressure n

48、on-return valvedevice which prevents passage of gas in the direction opposite to normal flowSOURCE: ISO 15615:2013, 3.1, modified “low pressure” has been added to the term and “normal” to the definition.3.6 High pressure valves2 ISO 2017 All rights reservedBS EN ISO 14114:2018ISO 14114:2017(E)NOTE H

49、igh pressure is considered as P 1,5 bar (0,15 MPa) up to 25 bar (2,5 MPa), given as gauge pressure.3.6.1automatic quick-acting shut-off deviceself-acting device which closes quicklyNote 1 to entry: For example, when triggered by acetylene decomposition in the high pressure manifold pipework.SOURCE: ISO 15296:2017, 3.4.10, modified the example has been transferred to a note to entry.3.6.2high pressure stop valvedevice to prevent, when closed, the flow of gas on the high pressure side3.6.3th