EN ISO 14451-5-2013 en Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5 Requirements and categorization for airbag gas generators《点火制品 车辆用点火制品 第5部分 安全气囊气体发生器要求和分类》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 14451-5:2013Pyrotechnic articles Pyrotechnic articles for vehiclesPart 5: Requirements and categorization for airbag gas generatorsBS EN ISO 14451-5:2013 BRITISH STANDA

2、RDNational forewordThis British Standard is the UK implementation of EN ISO 14451-5:2013.The UK participation in its preparation was entrusted to T e c h n i c a lCommittee CII/47, Pyrotechnic articles.A list of organizations represented on this committee can beobtained on request to its secretary.T

3、his publication does not purport to include all the necessary provi-sions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 69666 4 ICS 43.040.80 Compliance with a British Standard cannot c

4、onfer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2013.Amendments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 14451-5 March 2013 ICS 43.

5、040.80 English Version Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 5: Requirements and categorization for airbag gas generators (ISO 14451-5:2013) Articles pyrotechniques - Articles pyrotechniques pour vhicules - Partie 5: Exigences relatives aux gnrateurs de gaz de sac gonflable

6、 et leur classement en catgories (ISO 14451-5:2013) Pyrotechnische Gegenstnde - Pyrotechnische Gegenstnde fr Fahrzeuge - Teil 5: Anforderungen und Kategorisierung von Airbaggasgeneratoren (ISO 14451-5:2013) This European Standard was approved by CEN on 9 February 2013. CEN members are bound to compl

7、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

8、Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the sam

9、e status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,

10、 Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All ri

11、ghts of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14451-5:2013: EBS EN ISO 14451-5:2013EN ISO 14451-5:2013 (E) 3 Foreword This document (EN ISO 14451-5:2013) has been prepared by Technical Committee CEN/TC 212“Pyrotechnic articles” the sec

12、retariat of which is held by NEN, in collaboration with Technical CommitteeISO/TC 22 “Road vehicles“. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by September 2013, and conflicting national standa

13、rds shall bewithdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared

14、under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulat

15、ions, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ireland, Italy,

16、Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14451-5:2013 has been approved by CEN as EN ISO 14451-5:2013 without any modification. BS EN ISO 1445

17、1-5:2013EN ISO 14451-5:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the EssentialRequirements of EC Directive 2007/23/EC on the placing on the marketof pyrotechnic articles This European Standard has been prepared under a mandate given to CEN by the European Comm

18、issionand the European Free Trade Association to provide one means of conforming to Essential Requirements ofthe New Approach Directive 2007/23/EC on the placing on the market of pyrotechnic articles. Once this standard is cited in the Official Journal of the European Union under that Directive and

19、has beenimplemented as a national standard in at least one Member State, compliance with the normative clauses ofthis standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption ofconformity with the corresponding Essential Requirements of that Directive and

20、associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 2007/23/EC on theplacing on the market of pyrotechnic articles (1 of 2) Clause(s)/sub-clause(s) of this document Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remarks/Notes 4

21、.8, 4.9 (1) Note: It is taken into account that the intended purpose of the pyrotechnic article is to function in a vehicle in case of accidents (2) See ISO 14451-2 4.9 (3) 1st sentence 4.9 (3) 2nd and 3rd sentences Note: It is taken into account that the intended purpose of the pyrotechnic article

22、is to function in a vehicle in case of accidents 4.2 (3a) 4.5 (3b) 4.3, 4.4, 4.6 (3c) 4.5 (3d) 4.5 (3e) 4.4, 4.5 (3f) 4.6 (3g) (3h) See ISO 14451-3 4.3, 4.5 (3i) (3j) See ISO 14451-2 4.3, 4.4, 4.6 (3) Last sentence 1 (4a) 1 (4b) BS EN ISO 14451-5:2013EN ISO 14451-5:2013 (E) 5 Table ZA.1 (2 of 2) Cla

23、use(s)/sub-clause(s) of this document Essential Safety Requirements (ESRs) of Directive 2007/23/EC Qualifying remarks/Notes 4.2, 4.9, 6 (5 B.1) (5 B.2) See ISO 14451-2 and ISO 14451-3 4.6, 4.7 (5 B.3) (5 B.4) Not applicable (5 C.1) to (5 C.5) Not applicable 4.2 (5 C.6) (5 C.7) Not applicable WARNING

24、 Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this part of EN ISO 14451. BS EN ISO 14451-5:2013ISO 14451-5:2013(E) ISO 2013 All rights reserved iiiContents PageForeword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Req

25、uirements and acceptance criteria . 14.1 General . 14.2 Verification of design and documentation 14.3 Drop test . 14.4 Vibration and temperature test 24.5 Thermal humidity cycling test . 24.6 Electrostatic discharge (ESD) test 24.7 Fire test 24.8 Tank test 44.9 Functioning test . 45 Test matrix for

26、airbag gas generators 46 Categorization . 5Bibliography 6BS EN ISO 14451-5:2013ISO 14451-5:2013(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally car

27、ried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

28、 ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare Internati

29、onal Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the ele

30、ments of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 14451-5 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 212, Pyrotechnic articles, in collaboration with Technic

31、al Committee ISO/TC 22, Road vehicles, Subcommittee SC 12, Passive safety crash protection systems, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 14451 consists of the following parts, under the general title Pyrotechnic articles Pyrotechnic art

32、icles for vehicles: Part 1: Terminology Part 2: Test methods Part 3: Labelling Part 4: Requirements and categorization for micro gas generators Part 5: Requirements and categorization for airbag gas generators Part 6: Requirements and categorization for airbag modules Part 7: Requirements and catego

33、rization for seatbelt pretensioners Part 8: Requirements and categorization for igniters Part 9: Requirements and categorization for actuators Part 10: Requirements and categorization for semi-finished productsiv ISO 2013 All rights reservedBS EN ISO 14451-5:2013INTERNATIONAL STANDARD ISO 14451-5:20

34、13(E)Pyrotechnic articles Pyrotechnic articles for vehicles Part 5: Requirements and categorization for airbag gas generators1 ScopeThis part of ISO 14451 specifies the types and order of tests to be applied to the airbag gas generators and sets out the acceptance criteria and means of categorizatio

35、n.This part of ISO 14451 applies to type tests.This part of ISO 14451 is not applicable to articles containing military explosives or commercial blasting agents except for black powder or flash composition.2 Normative referencesThe following referenced documents are indispensable for the application

36、 of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 14451-1, Pyrotechnic articles Pyrotechnic articles for vehicles Part 1: Terminology Pyrotechnic articles for vehicles

37、Part 1: TerminologyISO 14451-2:2013, Pyrotechnic articles Pyrotechnic articles for vehicles Part 2: Test methods Pyrotechnic articles for vehicles Part 2: Test methods3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 14451-1 apply.4 Requirements and acc

38、eptance criteria4.1 GeneralAirbag gas generators shall meet the requirements specified in 4.2 to 4.9 taking into account the test matrix of Clause 5.4.2 Verification of design and documentationDocumentation shall be complete as specified in ISO 14451-2:2013, 4.1.4.3 Drop test4.3.1 RequirementsAirbag

39、 gas generators shall be tested as specified in ISO 14451-2:2013, 4.2.4.3.2 Acceptance criteriaNo ignition of the airbag gas generator shall occur. ISO 2013 All rights reserved 1BS EN ISO 14451-5:2013ISO 14451-5:2013(E)No spill out of the pyrotechnic composition from the airbag gas generator shall o

40、ccur.4.4 Vibration and temperature test4.4.1 RequirementsAirbag gas generators shall be tested as specified in ISO 14451-2:2013, 4.3.4.4.2 Acceptance criteriaNo ignition of the airbag gas generator shall occur.No spill out of the pyrotechnic composition from the airbag gas generator shall occur.4.5

41、Thermal humidity cycling test4.5.1 RequirementsAirbag gas generators shall be tested as specified in ISO 14451-2:2013, 4.4.4.5.2 Acceptance criteriaNo ignition of the airbag gas generator shall occur.4.6 Electrostatic discharge (ESD) test4.6.1 RequirementsAirbag gas generators shall be tested as spe

42、cified in ISO 14451-2:2013, 4.5.If all igniters contained within the airbag gas generator are already successfully tested according to ISO 14451-8:2013, 4.5, the ESD test should be considered passed for the airbag gas generator as well.4.6.2 Acceptance criteriaNo ignition of the airbag gas generator

43、 shall occur.4.7 Fire test4.7.1 RequirementsAirbag gas generators shall be tested as specified in ISO 14451-2:2013, 4.6 with the following heating rate and positions: Heating rate: 50K/min.The number of burners shall be adequate to the dimensions of the airbag gas generator to completely engulf the

44、airbag gas generator by the flames.In case of vertical position (for example position 1 and 2 for tubular airbag gas generator), the horizontal cross section of the airbag gas generator shall be completely engulfed by the flames. Positions for airbag gas generators; see Figures 1 to 3:2 ISO 2013 All

45、 rights reservedBS EN ISO 14451-5:2013ISO 14451-5:2013(E)a) Position 1 Igniter towards fireb) Position 2 Igniter away from firec) Position 3 Right angle from positions 1 and 2Figure 1 Positions for tubular airbag gas generators, single stagea) Position 1 Igniter stage 1 towards fireb) Position 2 Ign

46、iter stage 2 towards firec) Position 3 Right angle from positions 1 and 2Figure 2 Positions for tubular airbag gas generators, dual stagea) Position 1 Igniter (s) towards fireb) Position 2 Igniter (s) away from firec) Position 3 Right angle from positions 1 and 2Figure 3 Positions for disc shape air

47、bag gas generatorsAirbag gas generators with shapes not mentioned above are subjected to the fire test in three positions corresponding most closely to the above.4.7.2 Acceptance criteriaOnly foreseeable fragmentation or foreseeable opening of the airbag gas generator shall occur. ISO 2013 All right

48、s reserved 3BS EN ISO 14451-5:2013ISO 14451-5:2013(E)4.8 Tank test4.8.1 RequirementsAirbag gas generators shall be tested as specified in ISO 14451-2:2013, 4.8.4.8.2 Acceptance criteriaOnly intended fragmentation or intended opening of the airbag gas generator shall occur.The performance of the airb

49、ag gas generator shall be within the range of performance parameters as specified by the manufacturer.4.9 Functioning test4.9.1 RequirementsAirbag gas generators shall be tested as specified in ISO 14451-2:2013, 4.9 with the airbag gas generators in any position without fixation.When multi-stage airbag gas generators are tested, the delay between ignition of stage 1 and the following stages shall be 5 ms or in accordance with the product specification or requirements.Functioning tests on exposed