EN ISO 15423-2010 en Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing《信息技术 自动识别和数据捕获技术 条形码扫描仪和解码器性能试.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 15423:2010Information technology Automatic identification anddata capture techniques Bar code scanner and decoderperformance testing (ISO/IEC15423:2009)BS EN ISO 15423:

2、2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO15423:2010. It is identical to ISO 15423:2009. It supersedes BS EN ISO/IEC 15423:2005 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IST/37, Coding of picture

3、, audio, multimedia andhypermedia information.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0

4、580 62963 1ICS 35.040Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME

5、 EUROPENNE EUROPISCHE NORM EN ISO 15423 September 2010 ICS 35.040 Supersedes EN ISO/IEC 15423:2005English Version Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing (ISO/IEC 15423:2009) Technologies de linformation - Techn

6、iques automatiques didentification et de capture des donnes - Contrle de scanner de code barres et de performance du dcodeur (ISO/IEC 15423:2009) Informationstechnik - Automatische Identifikation und Datenerfassungsverfahren - Leistungsanforderungen an Strichcode-Scanner und -Decoder (ISO/IEC 15423:

7、2009) This European Standard was approved by CEN on 12 August 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographica

8、l references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN

9、member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ire

10、land, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix

11、17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 15423:2010: EBS EN ISO 15423:2010EN ISO/IEC 15423:2010 (E) 3 Foreword The text of ISO/IEC 15423:2009 has been prepared by Technical Committee ISO/IEC/JTC

12、1 “Information technology” of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) and has been taken over as EN ISO/IEC 15423:2010 by Technical Committee CEN/TC 225 “AIDC technologies” the secretariat of which is held by NEN. This European

13、 Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of

14、 this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO/IEC 15423:2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

15、 countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia,

16、 Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO/IEC 15423:2009 has been approved by CEN as a EN ISO/IEC 15423:2010 without any modification. BS EN ISO 15423:2010ISO/IEC 15423:2009(E) ISO/IEC 2009 All rights reserved iiiContents Page Foreword iv Introd

17、uction.v 1 Scope1 2 Normative references1 3 Terms and definitions .2 4 Abbreviated terms .5 5 Categories of scanning equipment .5 5.1 Scanners with single-axis reading diagram .6 5.2 Scanners with two-axis reading diagram6 5.3 Scanners with three-axis reading diagram.6 6 Test requirements .6 6.1 Tes

18、t methods .6 6.2 Selection of equipment for testing 7 6.3 Test conditions 7 6.4 Test charts .7 6.5 Test equipment 15 6.6 Test criteria 15 6.7 Parameters to be tested and test methods.16 6.8 Test report26 7 Certification and labelling.26 8 Equipment specification.27 8.1 General .27 8.2 Scanner/decode

19、r interface .28 8.3 Human interface 28 8.4 Computer interface28 8.5 Digital input and output (I/O)29 8.6 Programming and configuration29 Annex A (normative) General operational requirements30 Annex B (informative) Classification of scanners .31 Annex C (informative) Example of decodability calculati

20、on.37 Bibliography39 BS EN ISO 15423:2010ISO/IEC 15423:2009(E) iv ISO/IEC 2009 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that

21、are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other internati

22、onal organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. International Standards are drafted in accordance with the rules given in t

23、he ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as an International Standard requires approval by at l

24、east 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. ISO/IEC 15423 was prepared by Joint Technica

25、l Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 31, Automatic identification and data capture techniques. This second edition cancels and replaces the first edition (ISO/IEC 15423:2004), which has been technically revised. BS EN ISO 15423:2010ISO/IEC 15423:2009(E) ISO/IEC 2009 All

26、 rights reserved vIntroduction The technology of bar coding is based on the recognition of patterns encoded in bars and spaces of defined dimensions or arrangements of marks in matrix patterns both of which are constructed according to rules defining the translation of characters into such patterns,

27、 known as the symbology specification. Bar code symbols can be produced with a wide variety of printing and other techniques, and the overall symbol dimensions can be uniformly scaled to suit particular requirements. There is a wide range of bar code reading equipment using various scanning techniqu

28、es, which enable bar code symbols to be read under many different conditions. Bar code symbols may be a) “linear” i.e. read in a single dimension, where the height of the bars provides redundancy of information, or b) “two dimensional”, either in stacked rows to be read unidimensionally with multipl

29、e scans, or as a matrix of elements requiring two dimensional reading. Bar code reading equipment must be capable of reliably converting the information represented as a bar code symbol into a form meaningful to the host computer system or otherwise to the user. Manufacturers of bar code equipment,

30、the producers of bar code symbols and the users of bar code technology require publicly available standard test specifications for bar code reading equipment to ensure the accuracy and consistency of performance of this equipment. BS EN ISO 15423:2010BS EN ISO 15423:2010INTERNATIONAL STANDARD ISO/IE

31、C 15423:2009(E) ISO/IEC 2009 All rights reserved 1Information technology Automatic identification and data capture techniques Bar code scanner and decoder performance testing 1 Scope This International Standard defines the test equipment and procedures to be used to determine the performance of bar

32、code scanning and decoding equipment. It deals with bar code scanning and decoding equipment both as integrated reading systems and as discrete units. It defines performance of the equipment in a particular configuration (e.g. a specific model) irrespective of the individual components used. It also

33、 defines in a normative annex operational parameters for the test equipment, and describes, in an informative annex, a means of classifying scanners. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the editi

34、on cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 15415, Information technology Automatic identification and data capture techniques Bar code print quality test specification Two-dimensional symbols ISO/IEC 15416, Info

35、rmation technology Automatic identification and data capture techniques Bar code print quality test specification Linear symbols ISO/IEC 15417, Information technology Automatic identification and data capture techniques Code 128 bar code symbology specification ISO/IEC 15424, Information technology

36、Automatic identification and data capture techniques Data Carrier Identifiers (including Symbology Identifiers) ISO/IEC 15426-1, Information technology Automatic identification and data capture techniques Bar code verifier conformance specifications Part 1: Linear symbols ISO/IEC 15426-2, Informatio

37、n technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 2: Two-dimensional symbols ISO/IEC 15438 Information technology Automatic identification and data capture techniques PDF417 bar code symbology specification ISO/IEC 16022 Information te

38、chnology Automatic identification and data capture techniques Data Matrix bar code symbology specification ISO/IEC 16388, Information technology Automatic identification and data capture techniques Code 39 bar code symbology specification ISO/IEC 19762-1, Information technology Automatic identificat

39、ion and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC BS EN ISO 15423:2010ISO/IEC 15423:2009(E) 2 ISO/IEC 2009 All rights reservedISO/IEC 19762-2, Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Pa

40、rt 2: Optically readable media (ORM) ISO/IEC 24723, Information technology Automatic identification and data capture techniques EAN.UCC Composite bar code symbology specification ISO/IEC 24724, Information technology Automatic identification and data capture techniques Reduced Space Symbology (RSS)

41、bar code symbology specification 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO/IEC 19762 and the following apply. 3.1 contact scanner particular type of scanner in which the scanning action takes place with the scanner in actual or near contact wit

42、h the symbol, e.g. wand or light pen 3.2 decode redundancy acquisition of a predetermined number of identical decodes before acceptance by a decoder of a valid decode EXAMPLE Decode redundancy of 2 requires two identical decodes. 3.3 exit window datum point from which the reading diagram is measured

43、, positioned on the beam midpoint and closest to the reading end of the scanner 3.4 maximum reading distance distance from the exit window to the end of the depth of field NOTE See R in Figure 2. 3.5 minimum reading distance distance from the exit window to the beginning of the depth of field NOTE S

44、ee A in Figure 2. 3.6 raster distance distance between the two most widely spaced adjacent scan lines projected on a plane at a defined distance from the scanner exit window NOTE See E in Figure B.3. 3.7 raster width distance between the two outermost scan lines projected on a plane at a defined dis

45、tance from the scanner exit window NOTE This covers a reading field which depends on the construction of the scanner and on the reading distance. See D in Figure B.3. BS EN ISO 15423:2010ISO/IEC 15423:2009(E) ISO/IEC 2009 All rights reserved 33.8 reading angle angular rotation of a symbol in an axis

46、 relative to a scan line NOTE Three different reading angles, tilt, skew and pitch are illustrated in Figure 1. Tilt refers to rotation around the z axis, skew to rotation around the x axis and pitch to rotation around the y axis. tilt skew pitch Figure 1 Reading angles 3.9 reading diagram graphical

47、 representation of the reading zone for a specific X dimension (or other parameters) of the bar code symbol NOTE The parameters of the reading diagram are: measurements made from the exit window of the reader; reading distance, measured on the z axis; X dimension (in mm); skew, tilt and pitch angles

48、; symbol contrast value; ambient light level; and symbology. See Annex B. 3.10 reading zone whole region (line, area or volume) in front of the exit window of a non-contact scanner in which defined symbols can be read NOTE See zone MNOP in Figure 2. X Axis Y Axis Z Axis BS EN ISO 15423:2010ISO/IEC 1

49、5423:2009(E) 4 ISO/IEC 2009 All rights reservedC Scanner Reading zone Two-axis BN O M P AR Figure 2 Example of reading zone (MNOP) NOTE Certain application requirements, for example in automated conveyor scanning systems, may restrict the effective reading zone to that shown in Figure 3 (MNOP). CScannerRestricted reading zone Two-axisM N OP BA RFigure 3 Example of restricted reading zone (MNOP) BS EN ISO 15423:2010ISO/IEC 15423:2009(E) ISO/IEC 2009