1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 15630-1:2010Steel for the reinforcement andprestressing of concrete TestmethodsPart 1: Reinforcing bars, wire rod and wireBS EN ISO 15630-1:2010 BRITISH STANDARDNationa
2、l forewordThis British Standard is the UK implementation of EN ISO15630-1:2010. It supersedes BS EN ISO 15630-1:2002 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/104, Concrete Reinforcing and Pre-Stressing Steels.A list of organizations represente
3、d on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 58489 3ICS 77.140.15; 91.080.40Compliance with a British Standard cannot con
4、fer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 November 2010.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 15630-1 October 2010 ICS 77.140.1
5、5 Supersedes EN ISO 15630-1:2002English Version Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010) Aciers pour larmature et la prcontrainte du bton - Mthodes dessai - Partie 1: Barres, fils machine et fils pour bto
6、n arm (ISO 15630-1:2010) Sthle fr die Bewehrung und das Vorspannen von Beton -Prfverfahren - Teil 1: Bewehrungsstbe, -walzdraht und -draht (ISO 15630-1:2010) This European Standard was approved by CEN on 14 October 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
7、 stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Sta
8、ndard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national s
9、tandards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland a
10、nd United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 1
11、5630-1:2010: EBS EN ISO 15630-1:2010EN ISO 15630-1:2010 (E) 3 Foreword The text of ISO 15630-1:2010 has been prepared by Technical Committee ISO/TC 17 “Steel” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 15630-1:2010 by Technical Committee ECISS/TC 10
12、4 “Concrete reinforcing and prestressing steels” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2011, and conflicting national standards shall be wi
13、thdrawn at the latest by April 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 15630-1:2002. Acc
14、ording to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, I
15、taly, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 15630-1:2010 has been approved by CEN as a EN ISO 15630-1:2010 without any modification. BS EN ISO 156
16、30-1:2010ISO 15630-1:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword .v Introductionvi 1 Scope1 2 Normative references1 3 Symbols1 4 General provisions concerning test pieces3 5 Tensile test.3 5.1 Test piece .3 5.2 Test equipment 3 5.3 Test procedure.4 6 Bend test 5 6.1 Test piece .5
17、6.2 Test equipment 5 6.3 Test procedure.5 6.4 Interpretation of test results.6 7 Rebend test 6 7.1 Test piece .6 7.2 Test equipment 6 7.2.1 Bending device 6 7.2.2 Rebending device6 7.3 Test procedure.6 7.3.1 General .6 7.3.2 Bending 7 7.3.3 Artificial ageing7 7.3.4 Rebending 7 7.4 Interpretation of
18、test results.7 8 Axial force fatigue test8 8.1 Principle of test8 8.2 Test piece .8 8.3 Test equipment 8 8.4 Test procedure.9 8.4.1 Provisions concerning the test piece9 8.4.2 Upper force (Fup) and force range (Fr).9 8.4.3 Stability of force and frequency.9 8.4.4 Counting of force cycles.9 8.4.5 Fre
19、quency.9 8.4.6 Temperature.9 8.4.7 Validity of the test9 9 Chemical analysis .9 10 Measurement of the geometrical characteristics.10 10.1 Test piece .10 10.2 Test equipment 10 10.3 Test procedure.10 10.3.1 Heights of transverse ribs or depths of indentations10 10.3.2 Height of longitudinal ribs (a)
20、.10 10.3.3 Transverse rib or indentation spacing (c).10 10.3.4 Pitch (P) 11 BS EN ISO 15630-1:2010ISO 15630-1:2010(E) iv ISO 2010 All rights reserved10.3.5 Part of the circumference without ribs or indentations (ei).11 10.3.6 Transverse rib or indentation angle () 11 10.3.7 Transverse rib flank incl
21、ination ()11 10.3.8 Width of transverse rib or width of indentation (b) 13 11 Determination of the relative rib or indentation area (fRor fP)13 11.1 Introduction13 11.2 Measurements13 11.3 Calculation of fR.13 11.3.1 Relative rib area .13 11.3.2 Simplified formulae14 11.3.3 Formula used for the calc
22、ulation of fR.14 11.4 Calculation of fP.15 11.4.1 Relative indentation area 15 11.4.2 Simplified formulae15 11.4.3 Formula used for the calculation of fP.16 12 Determination of deviation from nominal mass per metre16 12.1 Test piece .16 12.2 Accuracy of measurement16 12.3 Test procedure.16 13 Test r
23、eport 17 Bibliography 18 BS EN ISO 15630-1:2010ISO 15630-1:2010(E) ISO 2010 All rights reserved vForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally car
24、ried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
25、 ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare Interna
26、tional Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the
27、elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 15630-1 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 16, Steels for the reinforcement and prestressing of concrete. This second
28、 edition cancels and replaces the first edition (ISO 15630-1:2002), which has been technically revised. ISO 15630 consists of the following parts, under the general title Steel for the reinforcement and prestressing of concrete Test methods: Part 1: Reinforcing bars, wire rod and wire Part 2: Welded
29、 fabric Part 3: Prestressing steel BS EN ISO 15630-1:2010ISO 15630-1:2010(E) vi ISO 2010 All rights reservedIntroduction The aim of ISO 15630 is to provide all relevant test methods for reinforcing and prestressing steels in one standard. In that context, the existing International Standards for tes
30、ting these products have been revised and updated. Some further test methods have been added. Reference is made to International Standards on the testing of metals, in general, as they are applicable. Complementary provisions have been given if needed. BS EN ISO 15630-1:2010INTERNATIONAL STANDARD IS
31、O 15630-1:2010(E) ISO 2010 All rights reserved 1Steel for the reinforcement and prestressing of concrete Test methods Part 1: Reinforcing bars, wire rod and wire 1 Scope This part of ISO 15630 specifies test methods applicable to reinforcing bars, wire rod and wire for concrete. 2 Normative referenc
32、es The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 6892-1, Metallic materials Tensile testing
33、 Part 1: Method of test at room temperature ISO 7500-1, Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration of the force-measuring system ISO 9513, Metallic materials Calibration of extensometers used in uniaxi
34、al testing 3 Symbols The symbols used in this part of ISO 15630 are given in Table 1. Table 1 Symbols Symbol Unit Description Reference a mm Height of longitudinal rib 10.3.2, 11.3 ammm Rib height at the mid-point or indentation depth in the centre 10.3.1.2, 11.3.2, 11.4.2 amaxamm Maximum height of
35、transverse rib or maximum indentation depth 10.3.1.1 as,imm Average height of a portion i of a rib subdivided into p parts of length l, or average depth of a portion i of an indentation subdivided into p parts of width b 11.3.1, 11.4.1 a1/4mm Rib height at the quarter-point or indentation depth at t
36、he quarter of their width 10.3.1.2, 11.3.2, 11.4.2 a3/4mm Rib height at the three-quarters point or indentation depth at the three-quarters of their width 10.3.1.2, 11.3.2, 11.4.2 A % Percentage elongation after fracture 5.1, 5.3 Ag% Percentage non-proportional elongation at maximum force (Fm) 5.3 B
37、S EN ISO 15630-1:2010ISO 15630-1:2010(E) 2 ISO 2010 All rights reservedTable 1 (continued) Symbol Unit Description Reference Agt% Percentage total elongation at maximum force (Fm) Clause 5 b mm Width of transversal rib at the mid-point or width of indentation 10.3.8 c mm Transverse rib or indentatio
38、n spacing 10.3.3, 11.3 d mm Nominal diameter of the bar, wire rod or wire 5.3, 8.2, 8.4.7, 11.3 D mm Diameter of the mandrel of the bending device in the bend or rebend test 6.3, 7.3.2 e mm Average gap between two adjacent rib or indentation rows 10.3.5 f Hz Frequency of force cycles in the fatigue
39、test 8.1, 8.4.3 fP Relative indentation area Clause 11 fR Relative rib area Clause 11 FmN Maximum force in the tensile test 5.3 FPmm2Area of the longitudinal section of one indentation 11.4.1 FrN Force range in the axial force fatigue test 8.1, 8.3, 8.4.2, 8.4.3FRmm2Area of the longitudinal section
40、of one rib 11.3.1 FupN Upper force in the axial force fatigue test 8.1, 8.3, 8.4.2, 8.4.3l mm Length of the transverse rib at the rib-core interface Figure 6 n, m, q, p Quantities used in formulae defining fR, fP, FRand FP11.3, 11.4 P mm Pitch for cold-twisted bars 10.3.4, 11.3 r1 mm Distance betwee
41、n the grips and the gauge length for the manual measurement of Agt5.3 r2mm Distance between the fracture and the gauge length for the manual measurement of Agt5.3 ReHMPa Upper yield strength 5.3 RmMPa Tensile strength 5.3 Rp0,2MPa 0,2 % proof strength, non-proportional extension 5.2, 5.3 Snmm2Nomina
42、l cross-sectional area of the bar, rod or wire rod 8.4.2 Transverse rib flank inclination 10.3.7 Angle between the axis of a transverse rib or indentation and the bar, wire rod or wire axis 10.3.6, 11.3 Angle of bend in the bend or rebend test 6.3, 7.3.1 (Figure 4), 7.3.2 l mm Incremental part of th
43、e length of the transverse rib at the rib-core interface Figure 6 Angle of rebend in the rebend test 7.3.1 (Figure 4), 7.3.4 Empirical factor in empirical formulae of fRand fP11.3.2, 11.4.2 2aMPa Stress range in the axial force fatigue test 8.4.2 maxMPa Maximum stress in the axial force fatigue test
44、 8.4.2 iemm Part of the circumference without indentation or rib 10.3.5, 11.3.2, 11.4.2 NOTE 1 MPa = 1 N/mm2.aIn some product standards, the symbol h is also used for this parameter. BS EN ISO 15630-1:2010ISO 15630-1:2010(E) ISO 2010 All rights reserved 34 General provisions concerning test pieces U
45、nless otherwise agreed or specified in the product standard, the test piece shall be taken from the bar, wire rod or wire in the as-delivered condition. In the case of a test piece taken from coil, the test piece shall be straightened prior to any tests by a bend operation with a minimum amount of p
46、lastic deformation. NOTE The straightness of the test piece is critical for the tensile test and the fatigue test. The means of straightening the test piece (manual, machine) shall be indicated in the test report1). For the determination of the mechanical properties in the tensile test and the fatig
47、ue test, the test piece may be artificially aged (after straightening if applicable), depending on the requirements of the product standard. If the product standard does not specify the ageing treatment, the following conditions should be applied: heating the test piece to 100 C, maintaining at this
48、 temperature 10 C for a period of 1 h150+min and then cooling in still air to ambient temperature. If an ageing treatment is applied to the test piece, the conditions of the ageing treatment shall be stated in the test report. 5 Tensile test 5.1 Test piece In addition to the general provisions given
49、 in Clause 4, the free length of the test piece shall be sufficient for the determination of the percentage elongations in accordance with 5.3. If the percentage elongation after fracture (A) is determined manually, the test piece shall be marked in accordance with ISO 6892-1. If the percentage total elongation at maximum force (Agt) is determined by the manual method, equidistant marks shall be made on the free length of the test piece (see ISO 6892-1). The distance between the
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1