EN ISO 16119-2-2013 en Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2 Horizontal boom sprayers《农林机械 喷雾器具环境要求 第2部分 水平喷管式喷雾器》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 16119-2:2013Agricultural and forestry machinery - Environmental requirements for sprayersPart 2: Horizontal boom sprayers (ISO 16119-2:2013) BS EN ISO 16119-2:2013 BRIT

2、ISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 16119-2:2013. It is identical to ISO 16119-2:2013. It supersedes BS EN 12761-2:2001 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee AGE/15, Equipment for crop protect

3、ion and application of liquid fertilizer.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards

4、 Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 72833 4 ICS 65.060.40 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2013.Amen

5、dments issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16119-2 March 2013 ICS 65.060.40 Supersedes EN 12761-2:2001English Version Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Horizontal boom spray

6、ers (ISO 16119-2:2013) Matriel agricole et forestier - Exigences environnementales pour les pulvrisateurs - Partie 2: Pulvrisateurs rampe horizontale (ISO 16119-2:2013) Land- und Forstmaschinen - Pflanzenschutzgerte zum Ausbringen von Pflanzenschutzmitteln und flssigen Dngemitteln - Umweltschutz - T

7、eil 2: Feldspritzgerte und vergleichbare Gerte (ISO 16119-2:2013) This European Standard was approved by CEN on 5 January 2013. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard

8、 without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any o

9、ther language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republi

10、c, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN CO

11、MMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16119-2:2013: EBS EN ISO 16119-

12、2:2013EN ISO 16119-2:2013 (E) 3 Foreword This document (EN ISO 16119-2:2013) has been prepared by Technical Committee CEN/TC 144 “Tractorsand machinery for agriculture and forestry“, the secretariat of which is held by AFNOR, in collaboration withTechnical Committee ISO/TC 23 “Tractors and machinery

13、 for agriculture and forestry“. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by September 2013, and conflicting national standards shall bewithdrawn at the latest by September 2013. Attention is dr

14、awn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12761-2:2001. The following major changes were introduced: extension of th

15、e scope; updating of the normative references; addition of a Clause “List of significant hazards“; revision of requirements on control of spray drift and on cleaning; addition of a Clause “Verification“; completion of Clause “Instruction handbook“; deletion of Annex A “Test method for cleaning plant

16、 protection product cans“, and deletion of Annex B “Example of device for cleaning of plant protection product cans“ and addition of a reference toISO 21278-1; inclusion of Annex C “Additional requirements for band sprayers“ into the main text of the Standard;addition of Annex ZA. This document has

17、been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC In

18、ternal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,Hungary, Iceland, Ir

19、eland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN ISO 16119-2:2013EN ISO 16119-2:2013 (E) 4 Annex ZA (informative) Relationship between this European Standard and the

20、 EssentialRequirements of EC Directive 2009/127/EC amending 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide a means of conforming to Essential Requirements of theNew Approach Directive 2009/

21、127/EC amending 2006/42/EC. Once this standard is cited in the Official Journal of the European Union under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the normative clauses ofthis standard confers, within the limits of the scope of thi

22、s standard, a presumption of conformity with therelevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling withinthe scope of this standard. BS EN ISO 16119-2:2013ISO 16119-2:2013(E

23、) ISO 2013 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 List of significant hazards . 25 Requirements 35.1 General . 35.2 Volume/hectare adjustment system 95.3 Distribution and control of spray drift . 95.4 Cleaning 105.

24、5 Cleaning devices . 115.6 Additional requirements for band sprayers .115.7 Additional requirements for spray guns and lances 126 Verification 127 Marking .138 Instruction handbook 13Bibliography .14BS EN ISO 16119-2:2013ISO 16119-2:2013(E)ForewordISO (the International Organization for Standardizat

25、ion) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be r

26、epresented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards

27、are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an Internatio

28、nal Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 16119-2 was pr

29、epared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 144, Tractors and machinery for agriculture and forestry, in collaboration with SO Technical Committee TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 6, Equipment for crop protection, i

30、n accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).ISO 16119 consists of the following parts, under the general title Agricultural and forestry machinery Environmental requirements for sprayers: Part 1: General Part 2: Horizontal boom sprayers Part 3: Spr

31、ayers for bush and tree crops Part 4: Fixed and semi-mobile sprayersiv ISO 2013 All rights reservedBS EN ISO 16119-2:2013ISO 16119-2:2013(E)IntroductionThe requirements of this part of ISO 16119 are based on the test methods given in ISO 5682-2:1997, which were primarily developed for hydraulic spra

32、yers. For other types of sprayers, other test methods and/or test criteria may be needed and may be the subject of future investigation and a revision of this part of ISO 16119.This document is a type C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardou

33、s situations and hazardous events are covered are indicated in the scope of this document.When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for

34、 machines that have been designed and built according to the provisions of this type C standard. ISO 2013 All rights reserved vBS EN ISO 16119-2:2013BS EN ISO 16119-2:2013Agricultural and forestry machinery Environmental requirements for sprayers Part 2: Horizontal boom sprayers1 ScopeThis part of I

35、SO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.It is intended

36、to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements o

37、f ISO 16119-1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254-6).This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.2 Normative referencesThe following documents, in whole or in part, are normat

38、ively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 4102, Equipment for crop protection Sprayers Connection thre

39、adingISO 4254-6:2009, Agricultural machinery Safety Part 6: Sprayers and liquid fertilizer distributorsISO 4288, Geometrical Product Specifications (GPS) Surface texture: Profile method Rules and procedures for the assessment of surface textureISO 5681, Equipment for crop protection VocabularyISO 56

40、82-1, Equipment for crop protection Spraying equipment Part 1: Test methods for sprayer nozzlesISO 5682-2:1997, Equipment for crop protection Spraying equipment Part 2: Test methods for hydraulic sprayersISO 5682-3:1996, Equipment for crop protection Spraying equipment Part 3: Test method for volume

41、/hectare adjustment systems of agricultural hydraulic pressure sprayersISO 9357, Equipment for crop protection Agricultural sprayers Tank nominal volume and filling hole diameterISO 13440:1996, Equipment for crop protection Agricultural sprayers Determination of the volume of total residualISO 16119

42、-1:2013, Agricultural and forestry machinery Environmental requirements for sprayers Part 1: GeneralISO 21278-1, Equipment for crop protection Induction hoppers Part 1: Test methodsINTERNATIONAL STANDARD ISO 16119-2:2013(E) ISO 2013 All rights reserved 1BS EN ISO 16119-2:2013ISO 16119-2:2013(E)ISO 2

43、1278-2, Equipment for crop protection Induction hoppers Part 2: General requirements and performance limitsISO 22368-1, Crop protection equipment Test methods for the evaluation of cleaning systems Part 1: Internal cleaning of complete sprayersISO 22368-3, Crop protection equipment Test methods for

44、the evaluation of cleaning systems Part 3: Internal cleaning of tankISO 22369-2:2010, Crop protection equipment Drift classification of spraying equipment Part 2: Classification of field crop sprayers by field measurementsISO 22856, Equipment for crop protection Methods for the laboratory measuremen

45、t of spray drift Wind tunnelsISO 22866, Equipment for crop protection Methods for field measurement of spray drift3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 5681 and the following apply.3.1horizontal boom sprayermachine for spraying plant protect

46、ion products, along a boom or in bands, with a spray generally directed downwards onto/into the target3.2plant protection product containercollective name for plant protection product packagingEXAMPLE Can, bottle, bag, sack, box.3.3cleaning devicedevice for cleaning the insides of empty plant protec

47、tion product containersNote 1 to entry: The device may be an integral part of the sprayer or an independent installation (e.g. stationary equipment).4 List of significant hazardsTable 1 specifies the significant hazards, the significant hazardous situations and significant hazardous event(s) covered

48、 by this part of ISO 16119 that have been identified by risk assessment as being relevant for this type of machine with regard to environmental contamination, and which require specific action by the designer or manufacturer to eliminate or to reduce environmental contamination.Attention is drawn to

49、 the necessity to verify that the environmental requirements specified in both ISO 16119-1 and this part of ISO 16119 apply to each significant hazard presented by a given machine and to validate that the risk assessment is complete.2 ISO 2013 All rights reservedBS EN ISO 16119-2:2013ISO 16119-2:2013(E)Table 1 List of significant hazardsHazardHazardous situation/eventClause/subclause of this part of ISO 161194.1 Spillages FillingInduction of plant pro-tection product5.1