EN ISO 16228-2018 en Fasteners - Types of inspection documents.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Fasteners - Types of inspection documentsBS EN ISO 16228:2018National forewordThis British Standard is the UK implementation of EN ISO 16228:2018. It is identical to ISO 16228:2017.The UK participation in its preparatio

2、n was entrusted to Technical Committee FME/9, Fasteners.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The Br

3、itish Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 82450 0ICS 21.060.01Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 Fe

4、bruary 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 16228:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 16228February 2018ICS 21.060.01EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-C

5、ENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 16228:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersFasteners - Types of inspection documents (ISO 16228:2017)Fixations - Types de documents de contrle (IS

6、O 16228:2017)Mechanische Verbindungselemente - Arten von Prfbescheinigungen (ISO 16228:2017)This European Standard was approved by CEN on 3 August 2017.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the statu

7、s of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, Germ

8、an). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia,

9、 Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey a

10、nd United Kingdom.English VersionEN ISO 16228:2018 (E)European forewordThis document (EN ISO 16228:2018) has been prepared by Technical Committee ISO/TC 2 “Fasteners” in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by BSI.This European Standard shall

11、 be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall be withdrawn at the latest by August 2018.Attention is drawn to the possibility that some of the elements of this document

12、 may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bu

13、lgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switz

14、erland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 16228:2017 has been approved by CEN as EN ISO 16228:2018 without any modification.2BS EN ISO 16228:2018ISO 16228:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Inspection 24.1 Typ

15、es of inspection documents for material. 24.2 Types of inspection for fasteners 34.2.1 Non-specific inspection for fasteners 34.2.2 Specific inspection for fasteners 34.3 Types of inspection documents for fasteners . 34.3.1 General 34.3.2 Fastener declaration of compliance F2.1 34.3.3 Fastener test

16、report F2.2. 44.3.4 Fastener test report F3.1. 44.3.5 Fastener test report F3.2. 45 Requirements for fastener inspection documents . 45.1 General . 45.2 Maintenance of data for inspection documents . 55.3 Traceability 55.4 Inspection document sources 55.5 Subcontracted tests and/or inspection . 65.6

17、 Sampling . 65.7 Reporting of test/inspection results 65.8 Minimum results to be included for each type of fasteners . 75.9 Validation of the inspection document 96 Required content for each type of fastener inspection document . 96.1 General . 96.2 Content of the fastener declaration of compliance

18、F2.1 96.3 Content of the fastener test report F2.2 . 106.4 Content of the fastener test report F3.1 . 116.5 Content of the fastener test report F3.2 . 127 Amendment to inspection documents 138 Transmission of inspection documents.13Annex A (informative) Examples of inspection documents .14Annex B (i

19、nformative) Code numbers applicable to fasteners .18Bibliography .26 ISO 2017 All rights reserved iiiContents PageBS EN ISO 16228:2018ISO 16228:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work

20、 of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmen

21、tal, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the

22、ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibi

23、lity that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of p

24、atent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to co

25、nformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 7, Re

26、ference standards.iv ISO 2017 All rights reservedBS EN ISO 16228:2018ISO 16228:2017(E)IntroductionThis document specifies the fastener inspection documents which can be supplied when requested at the time of the order.Before publication of this document, inspection documents according to ISO 10474 o

27、r EN 10204 were also applied for fasteners. This document was developed specifically for fasteners, as a preferred alternative to ISO 10474 or EN 10204.Data in inspection documents may be collected from in-process control during the manufacture of the fasteners and/or from final control on the finis

28、hed fasteners based on sampling. In-process control during manufacture within a certified quality assurance system operated by the manufacturer gives the most reliable information about conformance of the fasteners (for more information regarding acceptance inspection or quality assurance for fasten

29、ers, see ISO 3269 or ISO 16426).Inspection documents for fasteners may include material, mechanical, physical, dimensional, functional and finish-coating properties, as agreed at the time of the order. ISO 2017 All rights reserved vBS EN ISO 16228:2018This page deliberately left blankFasteners - Typ

30、es of inspection documents1 ScopeThis document specifies the different types of fastener inspection documents issued by the fastener manufacturer or distributor and/or by the external authorized representative on specific request of the purchaser at the time of the order. declaration of compliance (

31、F2.1); test reports (F2.2, F3.1 and F3.2).NOTE The term “certificate” is in common use, however for fastener inspection documents the terminology to be used is “test report”.This document specifies requirements for the content of each fastener inspection document, in conjunction with the order, the

32、relevant standards and/or specified requirements.This document is applicable to finished fasteners such as bolts, screws, studs, nuts, washers, pins, rivets, etc. made of steel, stainless steel, non-ferrous metal or non-metallic material.This document does not apply to special-purpose or specially e

33、ngineered applications requiring other types of procedures (e.g. initial samples).Examples of inspection documents are given in Annex A. An example of a coding system identifying the sections in fastener inspection documents is given in Annex B.2 Normative referencesThe following documents are refer

34、red to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 898-1, Mechanical propertie

35、s of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes Coarse thread and fine pitch threadISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel Part 2: Nuts with specified property classes Coarse thread and fin

36、e pitch threadISO 898-3,1)Mechanical properties of fasteners made of carbon steel and alloy steel Part 3: Flat washers with specified property classesISO 898-5, Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified ha

37、rdness classes Coarse thread and fine pitch threadISO 1891-4:2017, Fasteners Terminology Part: 4: Control, inspection, delivery, acceptance and qualityISO 2320, Fasteners Prevailing torque steel nuts Functional propertiesISO 2702, Heat-treated steel tapping screws Mechanical propertiesISO 3269, Fast

38、eners Acceptance inspectionISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs1) Under preparation. INTERNATIONAL STANDARD ISO 16228:2017(E) ISO 2017 All rights reserved 1BS EN ISO 16228:2018ISO 16228:2017(E)ISO 3506-2, Mechanical proper

39、ties of corrosion-resistant stainless steel fasteners Part 2: NutsISO 3506-3, Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stressISO 3506-4, Mechanical properties of corrosion-resistant stainless steel fasteners Par

40、t 4: Tapping screwsISO 10666, Drilling screws with tapping screw thread Mechanical and functional properties3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 1891-4 and the following apply.ISO and IEC maintain terminological databases for use in standar

41、dization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1authorized representativeperson who is authorized as a quality assurance representative to validate and sign inspection documents on beh

42、alf of the supplier or the purchaser3.2external authorized representativethird party agreed between the purchaser and the supplier or a purchasers requested inspection representative, or an inspection representative designated by an official regulation3.3validationconfirmation by the authorized repr

43、esentative (3.1) or the external authorized representative (3.2) of the content of the inspection document and final approval by means of signature3.4pass-through distributorfastener distributor who sells the original manufacturers fasteners as received, without altering the fasteners or the package

44、sSOURCE: ISO 1891-4:2017, 3.6.43.5alteration distributorfastener distributor who alters fasteners prior to deliverySOURCE: ISO 1891-4:2017, 3.6.64 Inspection4.1 Types of inspection documents for materialFor material inspection documents 2.1, 2.2, 3.1 and 3.2, see ISO 10474 or other relevant technica

45、l specifications (e.g. EN 10204).2 ISO 2017 All rights reservedBS EN ISO 16228:2018ISO 16228:2017(E)4.2 Types of inspection for fasteners4.2.1 Non-specific inspection for fastenersInspection carried out in order to verify that the fasteners comply with the order and relevant standards and/or specifi

46、ed requirements. The fasteners inspected and/or tested are not necessarily part of the actually delivered fasteners provided that they are in accordance with the same standard or technical specification, are manufactured from the same material designation, are manufactured with the same manufacturin

47、g sequences and under same conditions, have the same shape, and have similar dimensions, where the differences do not impact the test results.4.2.2 Specific inspection for fastenersInspection carried out before delivery, on the fasteners from the original manufacturing lot and in accordance with the

48、 product specification, in order to verify that the fasteners comply with the order and relevant standards and/or specified requirements.4.3 Types of inspection documents for fasteners4.3.1 GeneralThe types of inspection document for fasteners are summarized in Table 1.Table 1 Inspection documents f

49、or fastenersType and name of fastener inspection documentWhen Content ValidationF2.1 Fastener declaration of complianceRequested by the purchaser at the time of the orderDeclaration of conformance for the delivered fasteners, without resultsThe manufacturer or distributor authorized representativeF2.2 Fastener test reportRequested by the purchaser at the time of the orderDeclaration of conformance for the delivered fasteners, with results based on non-specific inspectionThe manufacturer authorized representa-