1、BSI Standards PublicationBS EN ISO 17225-7:2014Solid biofuels - Fuelspecifications and classesPart 7: Graded non-woody briquettesBS EN ISO 17225-7:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO17225-7:2014.The UK participation in its preparation was en
2、trusted to TechnicalCommittee PTI/17, Solid biofuels.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British
3、Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 78145 2ICS 27.190; 75.160.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 Jul
4、y 2014.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 17225-7 May 2014 ICS 27.190; 75.160.10 English Version Solid biofuels - Fuel specifications and classes - Part 7: Graded non-woody briquettes (ISO 17225-7:2014) Biocombustibles solide
5、s - Classes et spcifications des combustibles - Partie 7: Classes de briquettes dorigine agricole (ISO 17225-7:2014) Feste Biobrennstoffe - Brennstoffspezifikationen und -klassen - Teil 7: Einteilung von nicht-holzartigen Briketts (ISO 17225-7:2014) This European Standard was approved by CEN on 29 M
6、arch 2014. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be ob
7、tained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the
8、CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Irela
9、nd, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Cent
10、re: Avenue Marnix 17, B-1000 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 17225-7:2014 EBS EN ISO 17225-7:2014EN ISO 17225-7:2014 (E) 3 Foreword This document (EN ISO 17225-7:2014) has been prepared by Technica
11、l Committee ISO/TC 238 “Solid biofuels” in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest
12、by November 2014, and conflicting national standards shall be withdrawn at the latest by November 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all su
13、ch patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the fo
14、llowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands
15、, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 17225-7:2014 has been approved by CEN as EN ISO 17225-7:2014 without any modification. BS EN ISO 17225-7:2014ISO 17225-7:2014(E) ISO 2014 All rights
16、reserved iiiContents PageForeword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 24 Symbols and abbreviated terms . 35 Specification of graded non-woody briquettes . 3Bibliography 6BS EN ISO 17225-7:2014ISO 17225-7:2014(E)ForewordISO (the International Organization for
17、Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the r
18、ight to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedur
19、es used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial r
20、ules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights iden
21、tified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation
22、on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is
23、ISO/TC 238, Solid biofuels.ISO 17225 consists of the following parts, under the general title Solid biofuels Fuel specifications and classes: Part 1: General requirements Part 2: Graded wood pellets Part 3: Graded wood briquettes Part 4: Graded wood chips Part 5: Graded firewood Part 6: Graded non-w
24、oody pellets Part 7: Graded non-woody briquettesiv ISO 2014 All rights reservedBS EN ISO 17225-7:2014ISO 17225-7:2014(E)IntroductionThe objective of the ISO 17225 series is to provide unambiguous and clear classification principles for solid biofuels; to serve as a tool to enable efficient trading o
25、f biofuels; to enable good understanding between seller and buyer as well as a tool for communication with equipment manufacturers. It will also facilitate authority permission procedures and reporting.This part of ISO 17225 supports the use of graded non-woody pellets for residential, small commerc
26、ial and public building applications.The residential, small commercial and public building applications require higher quality fuel for the following reasons: Small-scale equipment does not usually have advanced controls and flue gas cleaning Appliances is not generally managed by professional heati
27、ng engineers Appliances are often located in residential and populated districtsNon-woody briquettes have high ash, chlorine, nitrogen, sulfur and major element contents, so non-woody briquettes are recommended to be used in appliances, which are specially designed or adjusted for this kind of briqu
28、ettes.NOTE 1 Briquettes produced according to this part of ISO 17225 may be used in stoves, fireplaces, cookers, roomheaters and multifired sauna stoves, which are tested according to European standards EN 132291, EN 128152, EN 128093, EN 132404, EN 152505and EN 158216, and boilers systems tested ac
29、cording to EN 30357.NOTE 2 When using non-woody materials for combustion special attention should be paid to the risk of corrosion in small and medium scale boilers and flue gas systems. Be aware that herbaceous or fruit biomass may influence the fuel ash composition differently depending on growth
30、and soil conditions. The content of chlorine, phosphate and potassium in the material may form chlorides and phosphates and other chemical compounds resulting in high hydrochloric emissions and chemically active ash with low melting temperature causing corrosion.NOTE 3 In general non-woody biomass m
31、aterials have higher content of ash forming elements and produces ashes with lower melting temperature compared to most woody biomass. This may result in fouling, slagging and corrosion inside boilers. These problems are especially related to materials that contain high content of potassium (K) and
32、silicate (Si) and low content of calcium (Ca).NOTE 4 For individual contracts ISO 17225-1 can be used.Although these product standards may be obtained separately, they require a general understanding of the standards based on and supporting ISO 17225-1. It is recommended to obtain and use ISO 17225-
33、1 in conjunction with these standards. ISO 2014 All rights reserved vBS EN ISO 17225-7:2014BS EN ISO 17225-7:2014Solid biofuels Fuel specifications and classes Part 7: Graded non-woody briquettes1 ScopeThis part of ISO 17225 determines the fuel quality classes and specifications of graded non-woody
34、briquettes. This part of ISO 17225 covers only non-woody briquettes produced from the following raw materials (see ISO 17225-1, Table 1): 2 Herbaceous biomassNOTE 1 Herbaceous biomass is from plants that have a non-woody stem and which die back at the end of the growing season. It includes grains or
35、 seeds crops from food production or processing industry and their by-products such as cereals. 3 Fruit biomass 4 Aquatic biomass 5 Biomass blends and mixturesNOTE 2 Group 5 Blends and mixtures include blends and mixtures from the main origin-based solid biofuel groups woody, herbaceous biomass, fru
36、it biomass and aquatic biomass.Blends are intentionally mixed biofuels, whereas mixtures are unintentionally mixed biofuels. The origin of the blend and mixture is to be described using ISO 17225-1, Table 1.If solid biofuel blend or mixture contains chemically treated material it shall be stated.NOT
37、E 3 Thermally treated biomass briquettes (e.g. torrefied briquettes) are not included in the scope of this part of ISO 17225. Torrefaction is a mild pre-treatment of biomass at a temperature between 200 300 C.2 Normative referencesThe following documents, in whole or in part, are normatively referen
38、ced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE ISO standards describing methods for analysis of fuel properties listed
39、in the Bibliography, will become normative references when they are published.ISO 16559, Solid biofuels Terminology, definitions and descriptions1)ISO 16948, Solid biofuels Determination of total content of carbon, hydrogen and nitrogen2)ISO 16968, Solid biofuels Determination of minor elements3)ISO
40、 16994, Solid biofuels Determination of total content of sulfur and chlorine4)1) To be published.2) To be published.3) To be published.4) To be published.INTERNATIONAL STANDARD ISO 17225-7:2014(E) ISO 2014 All rights reserved 1BS EN ISO 17225-7:2014ISO 17225-7:2014(E)ISO 17225-1, Solid biofuels Fuel
41、 specifications and classes Part 1: General requirementsISO 18122, Solid biofuels Determination of ash content5)ISO 18134-1, Solid biofuels Determination of moisture content Oven dry method Part 1: Total moisture Reference method6)ISO 18134-2, Solid biofuels Determination of moisture content Oven dr
42、y method Part 2: Total moisture - Simplified method7)3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 16559 and the following apply.3.1non-woody briquettedensified biofuel made with or without additives in form of cubiform, prismatic or cylindrical uni
43、t with diameter of more than 25 mm produced by compressing milled biomassNote 1 to entry: The raw material for non-woody briquettes can be herbaceous, fruit or aquatic biomass or biomass blends and mixtures.Note 2 to entry: Briquettes are usually manufactured in a piston press, with the total moistu
44、re content on wet basis usually being less than 15 % of the mass.3.2additivematerial which has been intentionally introduced into the fuel feed stock to improve quality of fuel (e.g. combustion properties), to reduce emissions or to make production more efficientNote 1 to entry: Trace amounts of e.g
45、. grease or other lubricants that are introduced into the fuel processing stream as part of normal mill operations are not considered as additives.3.3chemical treatmentany treatment with chemicals other than air, water or heatEXAMPLE Glue and paint.Note 1 to entry: Examples of chemical treatment are
46、 listed in ISO 17225-1.3.4commercial applicationfacility that utilize solid biofuel burning appliances or equipment that have similar fuel requirements as residential appliancesNote 1 to entry: Commercial applications should not be confused with industrial applications, which can utilize a much wide
47、r array of materials and have vastly different fuel requirements.5) To be published.6) To be published.7) To be published.2 ISO 2014 All rights reservedBS EN ISO 17225-7:2014ISO 17225-7:2014(E)4 Symbols and abbreviated termsThe symbols and abbreviated terms used in this part of ISO 17225 comply with
48、 the SI system of units as far as possible.d dry (dry basis)ar as receivedw-% weight-percentageA Designation for ash content on dry basis, Adw-%BD Designation for bulk density as received kg/m3D Designation for diameter as received, D mmDU Designation for mechanical durability as received w-%F Desig
49、nation for amount of fines as received w-%, particles less than 3,15 mmL Designation for length as received, L mmM Designation for moisture content as received on wet basis, Marw-%Q Designation for net calorific value as received, qp,net,arMJ/kg or kWh/kg or MWh/t at constant pressureNOTE 1 1 MJ/kg equals 0,2778 kWh/kg (1 kWh/kg equals 1 MWh/t and 1 MWh/t is 3,6 MJ/kg). 1 g/cm3equals 1 kg/dm3. 1 mg/kg equals 0,000 1 % or 1 ppm.NOTE 2 Designation symbols are used in combination with a
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1