EN ISO 17419-2018 en Intelligent transport systems - Cooperative systems - Globally unique identification.pdf

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Intelligent transport systems - Cooperative systems - Globally unique identificationBS EN ISO 17419:2018National forewordThis British Standard is the UK implementation of EN ISO 17419:2018. It is identical to ISO 17419:

2、2018. It supersedes PD CEN ISO/TS 17419:2014, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/278, Intelligent transport systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does

3、 not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 92345 6ICS 03.220.20; 35.240.60Compliance with a British Standard cannot confer immunity

4、 from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 17419:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 174

5、19June 2018ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 17419:2014EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2018 CEN Ref. No. EN ISO 17419:2018: EAll rights of exploitation in a

6、ny form and by any means reserved worldwide for CEN national MembersIntelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018)Systmes intelligents de transport - Systmes coopratifs - Identification unique au niveau global (ISO 17419:2018)Intelligente Verkeh

7、rssysteme - Kooperative ITS - Klassifikation und Steuerung von ITS Anwendungen im globalen Zusammenhang (ISO 17419:2018)This European Standard was approved by CEN on 9 June 2018.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this E

8、uropean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.This European Standard exists in three official versi

9、ons (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, B

10、elgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swe

11、den, Switzerland, Turkey and United Kingdom.English VersionEN ISO 17419:2018 (E)European forewordThis document (EN ISO 17419:2018) has been prepared by Technical Committee ISO/TC 204 “Intelligent transport systems“ in collaboration with Technical Committee CEN/TC 278 “Intelligent transport systems”

12、the secretariat of which is held by NEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2018, and conflicting national standards shall be withdrawn at the latest by December 2018.Attentio

13、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.This document supersedes CEN ISO/TS 17419:2014.According to the CEN-CENELEC Internal Regulations, the national

14、 standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuan

15、ia, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 17419:2018 has been approved by CEN as EN ISO 17419:2018 without any modification.iiBS EN ISO 17419:2018ISO 1

16、7419:2018Foreword vIntroduction vi1 Scope .12 Normative references 13 Terms and definitions .14 Symbols and abbreviated terms .45 Management issues . 65.1 General . 65.2 ITS communications architecture 75.3 PKI architecture . 75.4 Regulations and policies . 75.5 ITS station . 85.5.1 ITS station arch

17、itecture 85.5.2 Instantiations of an ITS station . 95.6 Applications and messages 95.6.1 ITS application . 95.6.2 ITS application class 105.6.3 ITS message sets .105.7 Communications . 105.7.1 Addressing in the communication protocol stack105.7.2 ITS-S management.115.7.3 ITS-S Security .115.8 Identi

18、fiers and addresses summary 116 GCMA organizational framework .136.1 Overview . 136.2 Registration of globally unique identifiers 136.3 Certification of ITS-S equipment 146.4 Certification of ITS-S application processes . 156.5 Issuance of ITS-SCU credentials 166.6 Issuance of certificates for real-

19、time operation 176.7 ITS application repository 176.8 Secure installation and maintenance of facilities and communication protocols186.9 Registries 186.9.1 General. 186.9.2 ITS application objects.186.9.3 ITS message sets .186.9.4 ITS regulatory regions 196.9.5 ITS policy regions .196.9.6 ITS port n

20、umbers .206.9.7 ITS flow types 206.9.8 ITS logical channels 206.9.9 ITS station units .206.9.10 ITS station communication units 206.9.11 ITS-S application process provisioner216.9.12 ITS-S equipment manufacturers .216.9.13 ITS application object owners . 216.9.14 ITS message set owners 216.9.15 ITS-

21、S application process developers .226.9.16 ITS-S facility layer services 226.9.17 ITS-SCU configuration management centres 226.9.18 ITS communication protocol stacks .226.9.19 ITS protocol identifier 23 ISO 2018 All rights reserved iiiContents PageBS EN ISO 17419:2018ISO 17419:20186.9.20 IANA regist

22、ries236.9.21 IEEE registries .236.10 Wrong behaviour reporting 247 GCMA technical framework 247.1 Addresses and identifiers . 247.1.1 Overview 247.1.2 ITS-AID 247.1.3 ITS-SAPID 257.1.4 ITS-MsgSetID 257.1.5 ITS-PN 257.1.6 ITS-FlowTypeID .267.1.7 ITS-LCHID . 267.1.8 ITS-SUID . 277.1.9 ITS-SCUID 277.1.

23、10 ITS-S-APPID . 277.1.11 ITS-RRID. 277.1.12 ITS-PRID . 277.1.13 ITS-SEMID . 287.1.14 ITS-AOOID . 287.1.15 ITS-ATT . 287.1.16 ITS-MSOID 287.1.17 ITS-SAPIID 297.1.18 ITS-S-APDID 297.1.19 ITS-SAPSSID 297.1.20 ITS-SecAlgID .307.1.21 ITS-S-FSID . 307.1.22 ITS-SCU-CMCID 307.1.23 ITS-ProtStckID 307.1.24 I

24、TS-ProtID . 307.2 Online management 307.2.1 Secure installation and maintenance of ITS-S application processes .307.2.2 Secure installation of ITS-S protocols and control functions .307.2.3 Registration of ITS-S application processes with the ITS-S management entity .317.2.4 Data flow management .31

25、7.2.5 Management of certificates for real-time communications .317.2.6 Exception reporting31Annex A (normative) ASN.1 modules 32Annex B (informative) ITS-AID allocation request template 43Bibliography .45iv ISO 2018 All rights reservedBS EN ISO 17419:2018ISO 17419:2018ForewordISO (the International

26、Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been esta

27、blished has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardiza

28、tion.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance wit

29、h the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any p

30、atent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.Fo

31、r an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.

32、iso.org/iso/foreword.html.This document was prepared by ISO/TC 204, Intelligent transport systems. This first edition cancels and replaces ISO/TS 17419:2014, which has been technically revised to become an International Standard. ISO 2018 All rights reserved vBS EN ISO 17419:2018ISO 17419:2018Introd

33、uctionClassification and management of ITS applications in a global context covers more than just the ITS applications themselves. It also covers elements of the environment in which ITS applications are instantiated.Intelligent Transport Systems (ITS) provide ITS services to users by execution of I

34、TS applications which typically requires communications between ITS station application processes residing in ITS station units (ITS-SU). Communications includes messages dedicated to ITS applications, and messages from ITS message sets.Following the definition in TS 102 86020, ITS applications and

35、ITS application classes are referred to as ITS application objects. ITS application objects are uniquely identified by the registered “ITS Application Identifier” (ITS-AID) specified in this document.NOTE 1 An ITS application class groups ITS applications together that provide the same type of servi

36、ce, e.g. “Electronic Fee Collection” (EFC), but operate in different contexts. Prior to start of service provisioning the applicable context is negotiated. The definition of ITS application classes is based on the concept of the DSRC Application entity as introduced in ISO 156287, which is identifie

37、d by a DSRCApplicationEntityID; negotiation of the applicable context is performed by BST/VST exchange.In ETSI TS 102 86020, ITS message sets were referred to as ITS application objects. This definition is not adopted in this document due to the very different nature of ITS message sets and ITS appl

38、ication objects. ITS message sets are uniquely identified by the registered “ITS Message Set Identifier” (ITS-MsgSetID) specified in this document.This document is an extension towards more general and global applicability of ETSI TS 102 86020. This document introduces the term “ITS-S object” as a g

39、eneral reference to ITS application objects, ITS message sets and other objects which may require globally unique identification and registration.NOTE 2 Examples of other ITS-S objects are ITS-S communication protocols and ITS-S security protocols.Management of ITS-S objects is specified in the ISO

40、24102 series (all parts)91214and in ISO 174232. This document focuses on some management aspects related to authorized and controlled operation of ITS-S objects, which requires considerations of ITS-S object identifiers, e.g. ITS-AID, ITS-MsgSetID, ITS-SUID, ITS-SCUID, addresses and protocol identif

41、iers used in the communication protocol stack of an ITS-S, and others.This document replaces ISO/TS 17419 without change of scope.vi ISO 2018 All rights reservedBS EN ISO 17419:2018Intelligent transport systems - Cooperative systems - Globally unique identification1 ScopeThis document describes and

42、specifies globally unique addresses and identifiers (ITS-S object identifiers) which are both internal and external to ITS stations and are used for ITS station management, describes how ITS-S object identifiers and related technical parameters are used for classification, registration and managemen

43、t of ITS applications and ITS application classes, describes how ITS-S object identifiers are used in the ITS communication protocol stack, introduces an organizational framework for registration and management of ITS-S objects, defines and specifies management procedures at a high functional level,

44、 is based on the architecture of an ITS station specified in ISO 21217:2014 as a Bounded Secured Managed Domain (BSMD), specifies an ASN.1 module for the identifiers, addresses, and registry records identified in this document, and specifies an ASN.1 module for a C-ITS Data Dictionary containing ASN

45、.1 type definitions of general interest.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest editio

46、n of the referenced document (including any amendments) applies.ISO/IEC 8824-1:2015, Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1ISO 21217:2014, Intelligent transport systems Communications access for land mobiles (CALM) Architecture3 Terms and

47、definitionsFor the purposes of this document, the terms and definitions given in ISO 21217:2014 and the following apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at https:/www.electropedia.org/ ISO Online browsing

48、 platform: available at https:/www.iso.org/obp3.1authorizationprescription that a particular behaviour shall not be preventedNote 1 to entry: Unlike a permission, an authorization is an empowerment.INTERNATIONAL STANDARD ISO 17419:2018 ISO 2018 All rights reserved 1BS EN ISO 17419:2018ISO 17419:2018

49、Note 2 to entry: From Reference 21.3.2ITS applicationinstantiation of an ITS service that involves an association of two or more complementary ITS-S application processesSOURCE: ISO 21217:2014, 3.9, modified the Note 1 to entry is deleted3.3ITS application classITS application designed for operation in different contexts involving real-time negotiation of the appropriate contextNote 1 to entry: The functional concepts of “application class” and “application context” were introduced in ISO 15628. ITS application class is