1、BRITISH STANDARDBS EN ISO 17700:2005Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing The European Standard EN ISO 17700:2005 has the status of a British StandardICS 61.060g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3
2、g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN ISO 17700:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 January 2006 BSI 27 January 2006ISBN 0 580 47606 5National forewordT
3、his British Standard is the official English language version of EN ISO 17700:2005. It is identical with ISO 17700:2005. It supersedes BS EN 13516:2002 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/69, Footwear, leather and coated fabrics, which
4、has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section e
5、ntitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Complia
6、nce with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related inter
7、national and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages ii and iii, a blank page, pages 1 to 12, an inside back cover and a back cover.The
8、 BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 17700September 2005ICS 61.060 Supersedes EN 13516:2001 English VersionFootwear - Test methods fo
9、r uppers, linings and insocks -Colour fastness to rubbing (ISO 17700:2004)Chaussures - Mthodes dessai des tiges, des doublures etdes garnitures intrieures - Stabilit de la couleur aufrottement (ISO 17700:2004)Schule - Prfverfahren fr Obermaterialien, Futter undDecksohlen - Farbechtheit bei Abrieb (I
10、SO 17700:2004)This European Standard was approved by CEN on 26 August 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliogr
11、aphical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN
12、 member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
13、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2005 CEN All ri
14、ghts of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 17700:2005: EForeword The text of ISO 17700:2004 has been prepared by Technical Committee ISO/TC 216 “Footwear“ of the International Organization for Standardization (ISO) and has been taken
15、over as EN ISO 17700:2005 by Technical Committee CEN/TC 309 “Footwear“, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2006, and conflicting natio
16、nal standards shall be withdrawn at the latest by March 2006. This document supersedes EN 13516:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Repu
17、blic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Endorsement notice The text of ISO 17700:2004 has been approved
18、by CEN as EN ISO 17700:2005 without any modifications. EN ISO 17700:2005Reference numberISO 17700:2004(E)INTERNATIONAL STANDARD ISO17700First edition2004-10-15Footwear Test methods for uppers, linings and insocks Colour fastness to rubbing Chaussures Mthodes dessai des tiges, des doublures et des ga
19、rnitures intrieures Stabilit de la couleur au frottement EN ISO 17700:2005ii iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
20、ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates
21、 closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards.
22、 Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this
23、document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 17700 was prepared by the European Committee for Standardization as EN 13516:2001. This International Standard includes corrigendum EN 13516:2001/AC:2003 and was adopted
24、 under a special “fast-track procedure” by Technical Committee ISO/TC 216, Footwear in parallel with its approval by the ISO member bodies. Throughout the text of this document, read “.this European Standard.” to mean “.this International Standard.”. EN ISO 17700:2005blank11 Scope1.1 This standard s
25、pecifies two test methods (method A and method B) for assessing the degree of damage(marring) and transfer of a materials surface colour during mild dry or wet abrasion. The methods are applicable toall footwear uppers, linings and insocks irrespective of the material, in order to assess suitability
26、 for end use.1.2 This standard also specifies a method (method C) for determining the likelihood of colour bleeding frommaterials and components such as sewing threads and shoe laces due to the action of water and artificialperspiration solutions, in order to assess suitability for end use.2 Normati
27、ve referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any
28、of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references, the latest edition of thepublication referred to applies (including amendments).EN 12222, Footwear - Standard atmospheres for conditioning and testing of footwear and c
29、omponents forfootwear.EN ISO 105-A01, Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:1994).EN 20105-A02, Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993).EN 20105-A03, Textiles - Tests for colou
30、r fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:1993).EN ISO 3696, Water for analytical laboratory use - Specification and test methods (ISO 3696:1987).ISO 105-F10, Textiles - Tests for colour fastness - Part F10: Specification for adjacent fabric: Multifibre.3 Terms and defini
31、tionsFor the purposes of this European Standard, the following terms and definitions apply.3.1colour fastness to rubbingresistance of a material to damage (marring) and transfer of the materials surface colour during mild dry or wetabrasion3.2perspiration fastnessresistance of a material to colour b
32、leed when exposed to an artificial perspiration solution3.3thick leatherleather with a thickness greater than 2 mmEN ISO 17700:20052 4 Apparatus and materialThe following apparatus and material shall be used:4.1 Method A4.1.1 Test machine with the following:4.1.1.1 Flat horizontal metal platform of
33、minimum dimensions 80 mm 25 mm.4.1.1.2 Means of moving the platform in a direction parallel to its 80 mm edges through distance of 35 mm 2mm and back again at a rate of 40 cycles/min 2 cycles/min.4.1.1.3 Pair of clamps positioned at the ends of the platform at 90 to the 80 mm edges and which aredesi
34、gned to clamp the test specimen against the platform. The clamp faces shall be a minimum distance of 80 mmapart.4.1.1.4 Means of moving the clamps apart so that the test specimen is extended linearly by an amountadjustable up to 20 %.4.1.1.5 Rubbing finger with a flat horizontal lower surface capabl
35、e of holding a square felt pad (4.1.2). Formachines with a platform wider than 25 mm the relative position of the rubbing finger shall be adjustable across thewidth of the platform.4.1.1.6 Means of holding a square felt pad (4.1.2) on the lower surface of the finger.4.1.1.7 Means of applying a downw
36、ard force of 4,9 N 0,1 N and 9,8 N 0,2 N to the rubbing finger.4.1.1.8 Means of counting the number of cycles traversed by the platform.4.1.2 Square pads of scoured pure wool felt with the following requirements:4.1.2.1 Sides of length 15 mm 1 mm.4.1.2.2 Mass per unit area of 1750 g/m2 100 g/m2and t
37、hickness 5,5 mm 0,5 mm when measured using adial gauge exerting a downward pressure of 49 kPa 5 kPa on a measuring foot diameter of 10 mm 1 mm.4.1.2.3 The pH of an aqueous extract, made by shaking 5 g of ground felt in 100 ml of distilled or deionizedwater complying with EN ISO 3696 in a polyethylen
38、e bottle and leaving for 2 h, between 6 and 7.4.1.3 Grey scales for assessing change in colour and staining with half step ratings conforming to EN 20105-A02and EN 20105-A034.1.4 Assessment cabinet with artificial lighting as specified in EN ISO 105-A01. Alternatively, the assessmentcan be carried o
39、ut in daylight from the north, when the test is carried out in the northern hemisphere, or daylightfrom the south when testing in the southern hemisphere.4.1.5 Distilled or de-mineralized water complying with grade 3 of EN ISO 3696.4.1.6 Synthetic perspiration solution containing per litre of soluti
40、on;- Sodium chloride, 5,0 g per litre of solution.- Ammonia solution, density 0,880 g/cm3, 6,0 cm3.4.1.7 White spirit, general purpose reagent grade.EN ISO 17700:200534.2 Method B4.2.1 Test machine with the following:4.2.1.1 Rigid horizontal platform (preferably metal) capable of clamping the test s
41、pecimen.4.2.1.2 Vertical rotating spindle capable of holding the circular felt pad.4.2.1.3 Means of rotating the felt pad at a speed of 15,6 rad/s 0,5 rad/s1).4.2.1.4 Means of loading the rotating felt pad with a force of either 24,5 N 0,5 N and 7,1 N 0,2 N.4.2.1.5 Means of counting the number of re
42、volutions of the felt pad.4.2.2 Circular pads of scoured pure wool felt with central holes, with the following requirements:a) Outside diameter 25 mm 1 mm, bore diameter 3 mm 0,5 mm.b) Thickness, to be measured by one of the following methods:Thickness Downward pressure/presser foot size Specimen6,5
43、 0,5 49 kPa 5 kPa/10 mm 1 mm Cut pads or uncut sheet material5,0 0,5 2,0 kPa 0,2 kPa/19 mm 10 mm Cut padsc) Density 190 kg/m3 20 kg/m3.4.2.3 Grey scales for assessing the change in colour and degree of staining complying with EN 20105-A02 andEN 20105-A03 respectively.4.2.4 Metal plate approximately
44、75 mm 65 mm and thickness 5 mm with a hole diameter 25 mm through itscentre for use in the wetting from the back with organic solvents test described in 6.2.2.6.4.2.5 Polished aluminium disc (diameter approximately 50 mm and thickness approximately 12 mm) to help coolthe test specimen in dry rub tes
45、ts.4.2.6 Balance, capable of weighing masses up to 5 g to an accuracy of 10 mg.4.2.7 Assessment cabinet with artificial lighting as specified in EN ISO 105-A01. Alternatively, the assessmentcan be carried out in daylight from the north, when the test is carried out in the northern hemisphere, or day
46、lightfrom the south when testing in the southern hemisphere.4.2.8 Distilled or deionised water complying with grade 3 of EN ISO 3696 for the wet rub test described in6.2.2.3.4.2.9 Synthetic perspiration solution, for the perspiration rub test described in 6.2.2.4, consisting of:- Sodium chloride, 5
47、g per litre of solution.- Ammonia solution, density 0,880 g/cm3, 6,0 cm3.4.2.10 White spirit for the spirit rub test described in 6.2.2.5.4.2.11 Organic solvents (as used for solvent activated stiffeners) for the wetting from the back with organicsolvents test described in 6.2.2.6.1) 1 rad 0,16 rev.
48、EN ISO 17700:20054 4.3 Method C4.3.1 Petri dish large enough to accommodate a glass plate (4.3.2) for each test specimen assembly.4.3.2 Glass plate of length at least 110 mm and width at least 55 mm with a mass of 100 g 2 g for each testspecimen assembly.4.3.3 Rectangular pieces of multifibre fabric
49、 type DW as specified in ISO 105-F10 of dimensions 100 mm 5 mm50 mm 2 mm.4.3.4 Oven maintained at a temperature of 37 C 2 C.4.3.5 Grey scales for assessing change in colour and staining with half steps as described in EN 20105-A02 andEN 20105-A03.4.3.6 Assessment cabinet with artificial lighting as specified in EN ISO 105-A01. Alternatively, the assessmentcan be carried out in daylight from the north, when the test is carried out in the northern hemisphere, or daylightfrom the south when testing in the souther
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1