1、BSI Standards PublicationBS EN ISO 19135-1:2015Geographic information Procedures for itemr e g i s t r a t i o nPart 1: FundamentalsBS EN ISO 19135-1:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 19135-1:2015. It supersedes BS EN ISO 19135:2007 which
2、is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee IST/36, Geographic information.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contr
3、act. Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 75924 6ICS 35.240.70Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the author
4、ity of theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19135-1 November 2015 ICS 35.240.70 Supersedes EN ISO 19135:2007English Version Geographic informat
5、ion - Procedures for item registration - Part 1: Fundamentals (ISO 19135-1:2015) Information gographique - Procdures pour lenregistrement dlments - Partie 1: Principes de base (ISO 19135-1:2015) Geoinformation - Registrierungsverfahren fr geographische Informationseinheiten - Teil 1: Grundstze (ISO
6、19135-1:2015) This European Standard was approved by CEN on 16 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
7、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib
8、ility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republi
9、c of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALIS
10、ATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19135-1:2015 EBS EN ISO 19135-1:2015EN ISO 19135-1:2015 (E) 3 European f
11、oreword This document (EN ISO 19135-1:2015) has been prepared by Technical Committee ISO/TC 211 “Geographic information/Geomatics“ in collaboration with Technical Committee CEN/TC 287 “Geographic Information” the secretariat of which is held by BSI. This European Standard shall be given the status o
12、f a national standard, either by publication of an identical text or by endorsement, at the latest by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of pate
13、nt rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 19135:2007. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
14、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slove
15、nia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19135-1:2015 has been approved by CEN as EN ISO 19135-1:2015 without any modification. BS EN ISO 19135-1:2015ISO 19135-1:2015(E)Foreword vIntroduction vi1 Scope . 12 Conformance . 12.1 General . 12.2 C
16、ore conformance class . 12.3 Extended conformance class . 12.4 Hierarchical register conformance class 23 Normative references 24 Terms, definitions, and abbreviations . 24.1 Terms and definitions . 24.2 Abbreviations . 44.3 Notation 45 Roles and responsibilities in the management of registers 45.1
17、General . 45.2 Register owner 55.3 Register manager 65.3.1 Appointment of a register manager 65.3.2 Responsibilities of a register manager . 65.4 Submitting organizations . 65.5 Control body 75.6 Registry manager 75.7 Register user . 76 Management of registers . 76.1 Establishment of registers 76.2
18、Status of register items 86.3 Change of status of register items 86.3.1 General 86.3.2 Addition . 86.3.3 Clarification 86.3.4 Invalidation . 86.3.5 Retirement. 96.3.6 Supersession 96.4 Submission of proposals . 96.4.1 Process of submitting 96.4.2 Submitting organizations . 96.4.3 Register manager 96
19、.5 Approval process 106.6 State of a register . 106.7 Publication . 106.8 Integrity . 116.9 Registration proposals 117 Register schema .117.1 General 117.2 Register . 127.2.1 Register schema .127.2.2 Object Type: Register 137.3 RegisterStakeholder 147.3.1 RegisterStakeholder schema 147.3.2 Object Ty
20、pe: RegisterStakeholder157.4 ItemClass . 167.4.1 ItemClass schema .16 ISO 2015 All rights reserved iiiContents PageBS EN ISO 19135-1:2015ISO 19135-1:2015(E)7.4.2 Object Type: ItemClass 177.5 RegisterItem . 177.5.1 RegisterItem schema .177.5.2 Object Type: RegisterItem 188 Hierarchical registers .208
21、.1 General 208.2 Management of hierarchical registers . 218.3 Extensions to the register schema 218.4 SubregisterDescription . 218.4.1 SubregisterDescription schema . 218.4.2 Object Type: SubregisterDescription 22Annex A (normative) Abstract test suite .24Annex B (normative) UML model for the extend
22、ed conformance class 26Annex C (informative) Establishment of registers by ISO/TC 211 50Annex D (informative) Processing of proposals 53Annex E (informative) Information to be included in proposals for item registration 58Annex F (informative) Backward compatibility .60Bibliography .62iv ISO 2015 Al
23、l rights reservedBS EN ISO 19135-1:2015ISO 19135-1:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committee
24、s. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Inter
25、national Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the diff
26、erent types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO sha
27、ll not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document
28、is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT
29、) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 211, Geographic information/Geomatics.This first edition of ISO 19135-1 cancels and replaces ISO 19135:2005, which has been technically revised.ISO 19135 consists of the following parts
30、, under the general title Geographic information Procedures for item registration: Part 1: Fundamentals Part 2: XML Schema Implementation ISO 2015 All rights reserved vBS EN ISO 19135-1:2015ISO 19135-1:2015(E)IntroductionThis part of ISO 19135 specifies procedures for the registration of items of ge
31、ographic information. ISO/IEC JTC 1 defines registration as the assignment of an unambiguous name to an object in a way that makes the assignment available to interested parties. Items of geographic information that may be registered are members of object classes specified in technical standards suc
32、h as those developed by ISO/TC 211.NOTE In this International Standard, the definition of registration has been changed so that registration is the assignment of linguistically independent identifiers, rather than names, to items of geographic information.Registration of items of geographic informat
33、ion offers several benefits to the geographic information community. Registrationa) supports wider use of registered items both by providing international recognition to the fact that such items conform to an ISO International Standard and by making them publicly available to potential users,b) prov
34、ides both immediate recognition to extensions of an International Standard and a source for updates to that International Standard during the regular maintenance cycle,c) may provide a single mechanism to access information concerning items that are specified in different standards,d) provides a mec
35、hanism for managing temporal change,NOTE Items specified in a standard or in a register may change over time either due to changes in technology or for other reasons. Published standards do not clearly document what changes may have occurred, and do not include information about earlier versions of
36、specified items. Such information can be maintained in a register.e) may be used to make sets of standardized tags available for encoding of registered items in data sets, andf) supports cultural and linguistic adaptability by providing both a means for recording equivalent names of items used in di
37、fferent languages, cultures, application areas and professions and a means for making those equivalent names publicly available.This part of ISO 19135 specifies procedures to be followed in preparing and maintaining registers of items of geographic information. Any organization may choose to establi
38、sh registers of items of geographic information that conform to this part of ISO 19135. Annex C is particularly applicable to registers established under the auspices of ISO/TC 211.A goal of this part of ISO 19135 is to achieve a balance between minimizing the number of registers for items of geogra
39、phic information and minimizing the burden on the registration authorities.Following experience of setting up registers in user communities, there are fewer requirements in this version than previously. Because of this, implementations of the previous edition of ISO 19135 should be conformant to thi
40、s part of ISO 19135. A log of changes from the previous version (ISO 19135:2005) is provided in Annex F.The level of abstraction for the UML model described in ISO 19135-1 is the “Abstract Schema level” according to ISO 19103 requirement 4.vi ISO 2015 All rights reservedBS EN ISO 19135-1:2015Geograp
41、hic information Procedures for item registration Part 1: Fundamentals1 ScopeThis part of ISO 19135 specifies procedures to be followed in establishing, maintaining, and publishing registers of unique, unambiguous, and permanent identifiers and meanings that are assigned to items of geographic inform
42、ation. In order to accomplish this purpose, this part of ISO 19135 specifies elements that are necessary to manage the registration of these items.2 Conformance2.1 GeneralThis part of ISO 19135 defines three conformance classes for registers: Core schema the minimum requirements for establishing, ma
43、intaining, and publishing registers; Extended schema additional requirements to be conformant to the most frequently used model elements in the previous edition (ISO 19135:2005); Hierarchical register.To conform to this part of ISO 19135, a register of items of geographic information shall satisfy a
44、ll of the requirements specified in one of the three conformance levels described in 2.2 to 2.4, with the corresponding abstract test suite given in Annex A.2.2 Core conformance classTable 1 defines the characteristics of the core conformance class.Table 1 Core conformance classConformance class ide
45、ntifier coreStandardization target registersDependency ISO 19103: Conformance classes UML 2, Model documentationISO 19115-1: Clause 2 Conformance require-mentsRequirements All requirements in Clauses 5 to 7Test s All tests in A.12.3 Extended conformance classTable 2 defines the characteristics for t
46、he extended conformance class.INTERNATIONAL STANDARD ISO 19135-1:2015(E) ISO 2015 All rights reserved 1BS EN ISO 19135-1:2015ISO 19135-1:2015(E)Table 2 Extended conformance classConformance class identifier extended-schemaStandardization target registersDependency hierarchicalRequirements All requir
47、ements in Annex BTest s All tests in A.22.4 Hierarchical register conformance classTable 3 defines the characteristics of the conformance class for hierarchical registers.Table 3 Hierarchical register conformance classConformance class identifier hierarchicalStandardization target registersDependenc
48、y coreRequirements All requirements in Clause 8Test s All tests in A.33 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document indispensable for its application. For dated references, only the edition cited applies. For undated references, the l
49、atest edition of the referenced document (including any amendments) applies.ISO 19103:1), Geographic information Conceptual schema languageISO 19115-1:2014, Geographic information Metadata Part 1: Fundamentals4 Terms, definitions, and abbreviations4.1 Terms and definitionsFor the purposes of this document, the following terms and definitions apply.4.1.1clarificationnon-substantive change to a register itemNote 1 to entry: A non-substantive change does not change the semantics or technical meaning of the item. Clarification does n
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1