EN ISO 19901-5-2016 en Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5 Weight control during engineering and construction《石油和天然气工业的海洋结.pdf

1、BS EN ISO 19901-5:2016Petroleum and naturalgas industries Specificr e q u i r e m e n t s f o r o f f s h o r estructuresPart 5: Weight control during engineering and construction (ISO 19901-5:2016)BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06BS EN ISO 19901-5:201

2、6 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO19901-5:2016. It supersedes BS EN ISO 19901-5:2003 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee B/525/12, Design of offshore structures.A list of organizations

3、represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0

4、580 84453 9ICS 75.180.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEURO

5、PEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 19901-5 March 2016 ICS 75.180.10 Supersedes EN ISO 19901-5:2003English Version Petroleum and natural gas industries - Specific requirements for offshore structures - Part 5: Weight control during engineering and construction (ISO 19901-5:2016) Ind

6、ustries du ptrole et du gaz naturel - Exigences spcifiques relatives aux structures en mer - Partie 5: Contrle des poids durant la conception et la fabrication (ISO 19901-5:2016) Erdl- und Erdgasindustrie - Besondere Anforderungen an Offshore-Bauwerke - Teil 5: Gewichtskontrolle whrend der Auslegung

7、 und Konstruktion (ISO 19901-5:2016) This European Standard was approved by CEN on 30 January 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-

8、to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by transl

9、ation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland

10、, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION C

11、OMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 19901-5:2016 EBS EN ISO 19901-5:2016EN ISO 19901

12、-5:2016 (E) 3 European foreword This document (EN ISO 19901-5:2016) has been prepared by Technical Committee ISO/TC 67 “Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries“ in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and

13、offshore structures for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2016, and conflictin

14、g national standards shall be withdrawn at the latest by September 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document

15、 supersedes EN ISO 19901-5:2003. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav R

16、epublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 19901-5:2016 has be

17、en approved by CEN as EN ISO 19901-5:2016 without any modification. BS EN ISO 19901-5:2016ISO 19901-5:2016(E)Foreword v0 Introduction .vi1 Scope . 12 Normative references 13 Terms and definitions . 24 Abbreviated terms 85 Weight control classes 85.1 General . 85.2 Class A: High definition of weight

18、and CoG 85.3 Class B: Medium definition of weight and CoG 85.4 Class C: Low definition of weight and CoG 95.5 Selection of class of weight control . 96 Weight and load budget (WLB).106.1 General 106.2 Requirements 116.3 Content 116.3.1 General. 116.3.2 Weight reserves .126.3.3 Future weights and loa

19、ds 136.3.4 Loading conditions and parameters 136.3.5 Formats and levels.146.3.6 CoG envelopes .147 Weight control procedure 158 Weight reporting .168.1 General 168.2 Weight report requirements 179 Requirements for suppliers weight data and weighing of equipment and bulks 209.1 General 209.2 Provisio

20、n of weight information . 209.3 Weighing requirements 209.4 Weighing equipment . 219.5 Weighing procedure 219.6 Notification and witnessing of weighing . 229.7 Calibration of weighing equipment 229.8 Weighing operation 229.9 Temporaries during weighing . 239.10 Items not installed during weighing .

21、2310 Requirements for weighing of major assemblies 2310.1 Weighing procedure 2310.2 Environmental conditions 2310.2.1 Light .2310.2.2 Wind 2410.2.3 Temperature and humidity 2410.3 Weighing 2510.3.1 Number and timing of weighing 2510.3.2 Weighing procedure .2510.3.3 Notification and witnessing of wei

22、ghings .2610.3.4 Preparation of the weighing 2610.3.5 Weighing equipment .2710.3.6 Calibration of weighing system 30 ISO 2016 All rights reserved iiiContents PageBS EN ISO 19901-5:2016ISO 19901-5:2016(E)10.3.7 Weighing foundation and supports 3010.3.8 Structural integrity .3110.3.9 Weighing operatio

23、n 3110.3.10 CoG calculations 3210.3.11 Weighing certificate3310.3.12 Weighing report .3311 Requirements for “as-built” weight documentation 34Annex A (informative) Weight data sheets Tagged equipment .35Annex B (informative) Weighing certificates 37Annex C (informative) Weight and load budget (WLB)

24、formats and levels .41Annex D (informative) Major elements of the weight displacement 42Annex E (informative) Supplier weighing procedure.43Annex F (informative) Guidelines for displacement measurement of floaters .45Annex G (informative) Requirements for weight control during operations 49Annex H (

25、informative) Requirements for topside weight estimation New builds/gree n field .65Annex I (informative) Executive summary description .70Annex J (informative) Weighing result uncertainty .72Annex K (informative) Weight control database structure 73Bibliography .75iv ISO 2016 All rights reservedBS E

26、N ISO 19901-5:2016ISO 19901-5:2016(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body i

27、nterested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechn

28、ical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO do

29、cuments should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held respons

30、ible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given fo

31、r the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL

32、: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 67, Materials,equipment and offshore structures for petroleum, petrochemical and natural gas industries, Subcommittee SC 7, Offshore structures.This second edition cancels and replaces the first edition (ISO

33、19901-5:2003), which has been technically revised.ISO 19901 consists of the following parts, under the general title Petroleum and natural gas industries Specific requirements for offshore structures: Part 1: Metocean design and operating considerations Part 2: Seismic design procedures and criteria

34、 Part 3: Topsides structure Part 4: Geotechnical and foundation design considerations Part 5: Weight control during engineering and construction Part 6: Marine operations Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units Part 8: Marine soil investigationsThe f

35、ollowing parts are under preparation: Part 9: Structural integrity management ISO 2016 All rights reserved vBS EN ISO 19901-5:2016ISO 19901-5:2016(E)0 Introduction0.1 GeneralThe International Standards ISO 19900 to ISO 19906 relating to offshore structures constitute a common basis covering those as

36、pects that address design requirements and assessments of all offshore structures used by the petroleum and natural gas industries worldwide. Through their application the intention is to achieve reliability levels appropriate for manned and unmanned offshore structures, whatever the type of structu

37、re and the nature of the materials used.It is important to recognize that structural integrity is an overall concept comprising models for describing actions, structural analyses, design rules, safety elements, workmanship, quality control procedures and national requirements, all of which are mutua

38、lly dependent. The modification of one aspect of design in isolation can disturb the balance of reliability inherent in the overall concept or structural system. The implications involved in modifications, therefore, need to be considered in relation to the overall reliability of all offshore struct

39、ural systems.ISO 19900 to ISO 19906 relating to offshore structures are intended to provide a wide latitude in the choice of structural configurations, materials and techniques without hindering innovation. Sound engineering judgement is therefore necessary in the use of these International Standard

40、s.0.2 PrefaceIt is proposed to canvass the TC 67/SC 7 member countries to widen the scope of this part of ISO 19901 for the third edition. As a consequence, the title might change. It is proposed to expand and re-structure this part of ISO 19901 to more comprehensively address topsides weight engine

41、ering principles, roles, responsibilities and objectives for a complete platform life cycle. It is proposed to re-format into a more traditional ISO document layout. The use of weight class A, B and C tables will be reviewed. There will be an outline of how to control topside weight, and of the aims

42、 and expectations of a Weight Review Panel (or similar). A common topside operating philosophy will be included with a matrix of coincident drilling loads, operating loads, and laydown / storage loads to be included in topside weight databases. It is proposed to give guidance on applied design contr

43、actor allowances during detailed design, plus the use of client operational and management reserves. The weight and CoG accuracy expected from weighings will be addressed. Separate clauses will be added to give clarity to specific requirements of floating structures and jackets The contents and term

44、inology will be coordinated to interface with ISO 19902, Design of offshore structures, and the forthcoming ISO19901-9, Structural integrity management (due to be published in 2017).It is proposed to give more guidance on a range of topics encountered during the phases of a platform life cycle, typi

45、cally:a) Weight control principlesOverview of principles, aims and objectivesRoles and responsibilitiesCompetencyvi ISO 2016 All rights reservedBS EN ISO 19901-5:2016ISO 19901-5:2016(E)Software selectionDeliverables for each project phaseWeight report contentsb) Floating structures and jacketsSpecif

46、ic requirements for floating structuresc) Concept and feasibility phaseUse of historical volumetric weight norms Use of area based weight calculationsUse of footprint ratiosd) Front end engineering design phaseDesign parameters to be fixed prior to setting Not-to-Exceed weightse) Detailed design pha

47、seControl of weight using a Weight Review Panel or similarUse of contractor allowances Use of client reservesDiscipline reporting responsibilitiesCoincident operating loadsCoincident drilling loadsCoincident laydown and storage loadsLaydown and storage drawings and area signageVendor weighing requir

48、ementsf) Fabrication phaseFabricator responsibilitiesReporting of site run materialsWeighing requirementsPreparations for weighingExpected weight and CoG accuracy from weighingsPredictions and witnessing of weighingsPost-weighing reconciliation and weighing correctionsg) Installation and hook-up pha

49、seReporting of hook-up weightsh) Operational phaseControl of weight and CoG for topside modifications ISO 2016 All rights reserved viiBS EN ISO 19901-5:2016ISO 19901-5:2016(E)Interfaces with ISO 19901-9 and ISO 19902i) Decommissioning phasePreparations for decommissioningSome of the above proposed changes are outlined in Annex G of this document (informative). It is proposed that preparation of the third edition of this part of ISO 19901 will begin immediately after the issue of this edition with a target publication date of 2017.v