EN ISO 19956-2004 en Footwear - Test methods for heels - Fatigue resistance《鞋靴 鞋跟的试验方法 抗疲劳 ISO 19956-2004》.pdf

1、BRITISH STANDARD BS EN ISO 19956:2004 Footwear Test m e t h o d s f o r h e e l s Fatigue resistance The European Standard EN ISO 19956:2004 has the status of a British Standard ICS 61.060 BS EN ISO 19956:2004 This British Standard was published under the authority of the Standards Policy and Strate

2、gy Committee on 24 September 2004 BSI 24 September 2004 ISBN 0 580 44502 X National foreword This British Standard is the official English language version of EN ISO 19956:2004. It is identical with ISO 19956:2004. It supersedes BS 5131-4.9:1991 which is withdrawn. The UK participation in its prepar

3、ation was entrusted to Technical Committee TCI/69, Footwear and leather, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications r

4、eferred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary pr

5、ovisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretati

6、on, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 7 and a back cover. The BSI copyrig

7、ht notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM ENISO19956 September2004 ICS61.060 Englishversion FootwearTestmethodsforheelsFatigueresistance(ISO 19956:2004) Ch

8、aussuresMthodesdessairelativesauxtalons Rsistancelafatigue(ISO19956:2004) SchuhePrfverfahrenfrAbstze Ermdungswiderstand(ISO19956:2004) ThisEuropeanStandardwasapprovedbyCENon2March2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an St

9、andardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadeb

10、ytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latv

11、ia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationina

12、nyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.ENISO19956:2004:EEN ISO 19956:2004 (E) 2 C o n t e n t s page Foreword3 1 Scope 4 2 Terms and definitions .4 3 Apparatus and material.4 4 Sampling and conditioning.6 5 Test method6 6 Expression of results 7 7 Test report 7 EN ISO 199

13、56:2004 (E) 3 Foreword This document (EN ISO 19956:2004) has been prepared by Technical Committee CEN /TC 309 “Footwear“, the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 “Footwear“. This European Standard shall be given the status of a national standar

14、d, either by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by March 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are boun

15、d to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and Unite

16、d Kingdom. EN ISO 19956:2004 (E) 4 1 Scope This European Standard specifies a test method for determining the ability of heels of ladies shoes to withstand the repeated small impacts imposed by normal walking. Although intended primarily for plastics heels, the procedure is also usable for testing s

17、teel heel dowels on their own. NOTE While the test method is applicable to all types of high heels of any construction, it is particularly useful for injection- moulded plastics heels which incorporate a steel dowel reinforcement. The shape of some heels is such that they have a high fatigue resista

18、nce. It is usually considered unnecessary to test such heels for fatigue resistance. 2 Terms and definitions For the purposes of this European Standard, the following term and definition apply. fatigue resistance resistance of a heel, under specified conditions, to repeated loading cycles. 3 Apparat

19、us and material 3.1 The following apparatus and material shall be used: 3.2 Heel fatigue-testing apparatus, incorporating a motor-driven pendulum which can deliver blows to a test specimen assembly, each blow having an energy of 0,68 J, at the rate of one blow per second. The apparatus is clamped ei

20、ther on to a solid built-in bench, or on to a rigid free-standing frame anchored to the floor (see NOTE). An example of a suitable apparatus is shown in Figure 1. NOTE If the apparatus is not firmly mounted, there is a partial loss of energy on impact, thereby producing false results. The apparatus

21、shall include the following: 3.2.1 Pendulum, consisting of a circular steel bob of diameter 57 mm 1 mm and thickness 20 mm 1 mm, which is fixed by a circular shaft of diameter 12,5 mm 1,0 mm to a hub on the bearing axle. The distance from the centre of the bob to the centre of the hub is 152 mm 2 mm

22、. The moment of the pendulum when is held horizontally is 0,68 Nm 0,02 Nm. 3.2.2 Striker head, consisting of a strip of metal 6,0 mm 0,5 mm thick, 20 mm 1 mm wide and 35 mm 2 mm long with the striking edge rounded to a radius of 3,0 mm 0,5 mm. The head is fixed rigidly to the pendulum bob so that th

23、e striker tip and centre of the bob lie on the same circle of swing of the pendulum and are 63,5 mm 2 mm apart. 3.2.3 Rebound damper, for the pendulum. 3.2.4 Base clamp, for holding the metal mounting tray (3.3) and for adjusting it vertically and horizontally to achieve correct alignment of the hee

24、l tip. 3.2.5 Counter, for recording the number of blows. 3.2.6 Overshoot cut-out device, which operates when the pendulum overshoots a broken heel stem at complete failure. EN ISO 19956:2004 (E) 5 Key 1 Pendulum 2 Pendulum bob 3 Striker head 4 Hub 5 Power supply switch 6 Counter 7 Test specimen asse

25、mbly 8 Vertical locking plate 9 Sighting plate for aligning the heel 10 Base clamp for rotation orientation 11 Clamp for vertical orientation 12 Device for locking 10 and 11 against 8 13 Horizontal locking device 14 Rebound damper, for the pendulum Figure 1 Heel fatigue-testing apparatus 3.3 Metal m

26、ounting trays. An example of a suitable apparatus is shown in Figure 2. Each to contain a heel set in low melting point metal alloy (3.4). EN ISO 19956:2004 (E) 6 Figure 2 Metal mounting tray with heel in position before addition of molten metal alloy 3.4 Metal alloy, melting point between 100 C and

27、 150 C. 4 Sampling and conditioning 4.1 Take three heels and set each heel in a dry metal mounting tray (3.3), using the procedure described in 4.2, to obtain a test specimen assembly. 4.2 Place the heel centrally in the tray so that the seat breast edge is against a flat end of the tray and heel ti

28、p points upwards (see Figure 2). Heat the metal alloy (3.4) until it is at the lowest temperature at which it will flow into all parts of the tray. Pour it into the tray filling the space around the heel to within 3 mm from the top of the tray. Allow the metal alloy to cool and set, thereby providin

29、g a rigid mounting for the heel. 5 Test method 5.1 Principle A heel is subjected to blows, each of specified energy, delivered by a pendulum once a second. Testing continues until failure of the heel takes place, or until satisfactory fatigue resistance is obvious. 5.2 Procedure 5.2.1 With the pendu

30、lum in the rest position, insert the test specimen assembly in the inclined part of the base clamp (3.2.4) of the heel fatigue-testing apparatus (3.2) with the back of the heel facing the pendulum. Set the test specimen assembly at suitable angle to the horizontal so that the blow will be applied ap

31、proximately at right angles to the heel stem. Adjust the position of the test specimen assembly in the base clamp until the striker (3.2.2) barely contacts the heel 6 mm below the heel tip. Set the counter (3.2.5) to “zero” (or note the riding), and start the machine ensuring that the overshoot cut-

32、out device is activated. 5.2.2 At intervals of 60 min check weather any damage has developed that still allows the pendulum to continue in motion. If it has, record the number of blows shown by the machine counter and describe the type of damage. EN ISO 19956:2004 (E) 7 5.2.3 If damage develops and

33、becomes so severe that the overshoot cut-out device stops the machine (termed “complete failure”), record the number of blows and describe the type of damage. 5.2.4 If a complete failure is not occurred after 20 000 blows (approximately 5 h 30 min) discontinue the test and describe any damage that h

34、as developed. 5.2.5 Damage involving fracture or cracking of the heel at the point of impact of the striker is regarded as invalid in this test, since it is due to the effect of the striker acting as a chisel rather than fracture of the heel due to impact at the heel as in wear. If such damage occur

35、s, report it together with this explanation. 5.2.6 Repeat the test with the other two test specimen assemblies by following the same procedure. 6 Expression of results Express the result for each test specimen assembly in one or more of the following ways, as appropriate: a) the number of blows at w

36、hich damage was first detected, as described in 5.2.2; b) the number of blows at which complete failure occurred, as described in 5.2.3; c) the fact that no complete failure occurred within 20 000 blows, as described in 5.2.4; d) the fact that damage involving fracture or cracking of the heel at the

37、 point of impact occurred, as described in 5.2.5. 7 Test report The test report shall include the following information: a) the result for each heel, expressed in accordance with clause 6; b) description of the damage or completely failure corresponding to test results expressed according to 6 a), 6

38、 b), 6 c) and/or 6 d), as applicable; c) a full description of the samples tested, including commercial styles codes, colours, nature, etc.; d) reference of this method of test; e) date of testing; f) any deviation from this test method. BS EN ISO 19956:2004 BSI 389 Chiswick High Road London W4 4AL

39、BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Us

40、ers of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secre

41、tary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of sta

42、ndards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders fo

43、r international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and

44、 its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to

45、 date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British

46、 Standards via British Standards Online can be found at http:/www.bsi- Further information about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardizat

47、ion bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude t

48、he free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.