EN ISO 20344-2011 en Personal protective equipment - Test methods for footwear《个人防护装备 鞋靴的试验方法》.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 20344:2011Personal protective equipment Test methods for footwear(ISO 20344:2011)BS EN ISO 20344:2011 BRITISH STANDARDNational forewordThis British Standard is the UK i

2、mplementation of EN ISO20344:2011. It supersedes BS EN ISO 20344:2004 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can beobtained on request to i

3、ts secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2012ISBN 978 0 580 67098 5ICS 13.340.50Compliance with a British Standard cannot confer immunity fromlegal obligati

4、ons.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2012.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20344 December 2011 ICS 13.340.50 Supersedes EN ISO 20344:2004Eng

5、lish Version Personal protective equipment - Test methods for footwear (ISO 20344:2011) quipement de protection individuelle - Mthodes dessai pour les chaussures (ISO 20344:2011) Persnliche Schutzausrstung - Prfverfahren fr Schuhe (ISO 20344:2011) This European Standard was approved by CEN on 30 Nov

6、ember 2011. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be o

7、btained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the

8、 CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembou

9、rg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights

10、of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20344:2011: EBS EN ISO 20344:2011EN ISO 20344:2011 (E) 3 Foreword This document (EN ISO 20344:2011) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors”, the secretariat

11、 of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment“. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and

12、conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This doc

13、ument supersedes EN ISO 20344:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informative Annex ZA, which is an integral

14、 part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, H

15、ungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN ISO 20344:2011EN ISO 20344:2011 (E) 4 Annex ZA (informative) Relationship between this European Standard

16、 and the Essential Requirements of EU Directive 89/686/EEC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the EU Directive 89/686/EEC on PPE. Once

17、 this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard, together with the relevant requirements given in the product standards, confers withi

18、n the limits of the scope of those standards, a presumption of conformity with the corresponding Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard.

19、 BS EN ISO 20344:2011ISO 20344:2011(E) ISO 2011 All rights reserved iiiContents PageForeword .v1 Scope 12 Normative references .13 Terms and definitions .24 Sampling and conditioning .24.1 Sampling 24.2 Conditioning .24.3 Prerequisites on the testing procedure .25 Test methods for whole footwear 55.

20、1 Specific ergonomic features 55.2 Determination of upper/outsole and sole interlayer bond strength 65.3 Determination of internal toecap length .115.4 Determination of impact resistance .125.5 Determination of compression resistance .155.6 Behaviour of toecaps and inserts (thermal and chemical) 175

21、.7 Determination of leakproofness 185.8 Determination of the dimensional conformity of inserts and the penetration resistance of the sole 185.9 Determination of the flex resistance of penetration-resistant inserts 225.10 Determination of electrical resistance .225.11 Determination of footwear slip r

22、esistance .235.12 Determination of insulation against heat 265.13 Determination of insulation against cold 285.14 Determination of energy absorption of the seat region 295.15 Determination of resistance to water for whole footwear 315.16 Determination of impact resistance of a metatarsal protective

23、device 365.17 Determination of the shock absorption capacity of ankle protection materials incorporated into the upper 406 Test methods for upper, lining and tongue 426.1 Determination of thickness of upper .426.2 Measurement of the height of the upper .426.3 Determination of tear strength of the up

24、per, lining and/or tongue 436.4 Determination of the tensile properties of the upper material 436.5 Determination of upper flexing resistance .446.6 Determination of water vapour permeability (WVP) .476.7 Determination of water vapour absorption (WVA) 516.8 Determination of water vapour coefficient

25、.546.9 Determination of pH value 546.10 Determination of resistance to hydrolysis of upper 546.11 Determination of chromium VI content .546.12 Determination of abrasion resistance of lining and insock .546.13 Determination of water penetration and water absorption for upper576.14 Determination of re

26、sistance of upper to cutting .597 Test methods for insole and insock .597.1 Determination of insole thickness 597.2 Determination of water absorption and desorption of insole and insock .597.3 Determination of abrasion resistance of insole 628 Test methods for outsole 648.1 Determination of outsole

27、thickness .648.2 Determination of tear strength of outsole 658.3 Determination of outsole abrasion resistance 658.4 Determination of flexing resistance of outsole .65BS EN ISO 20344:2011ISO 20344:2011(E)iv ISO 2011 All rights reserved8.5 Determination of resistance to hydrolysis of outsole .708.6 De

28、termination of resistance to fuel oil 708.7 Determination of resistance to hot contact 71Annex A (normative) Procedure for plasticine calibration 74Annex B (normative) Assessment of footwear by the laboratory during testing of thermal behaviour 76Annex C (informative) Footwear sizes 77Bibliography .

29、78BS EN ISO 20344:2011ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a

30、subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission

31、 (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical commi

32、ttees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be

33、 held responsible for identifying any or all such patent rights.ISO 20344 was prepared by the European Committee for Standardization (CEN) Technical Committee CEN/TC 161, Foot and leg protectors, in collaboration with ISO Technical Committee ISO/TC 94, Personal safety Protective clothing and equipme

34、nt, Subcommittee SC 3, Foot protection, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).This second edition cancels and replaces the first edition (ISO 20344:2004), which has been technically revised. It also incorporates the Technical Corrigendum ISO

35、 20344:2004/Cor.1:2005 and the Amendment ISO 20344:2004/Amd.1:2007. The main differences between this edition and the 2004 edition are: Annex A, inclusion of a new procedure for plasticine calibration; Annex C, inclusion of a new table for footwear sizing; 4.1, Table 1, clarification of the method f

36、or sampling; 5.1, clarification on testing of ergonomic features; 5.4 and 5.5, inclusion of a reference to EN 12568:2010; 5.8.3, different test methods for anti-penetration insoles; 5.15.2, inclusion of a new test method for water resistance; 6.4.2 and 6.5.2, inclusion of test methods (due to the wi

37、thdrawal of ISO 2023); 6.11, replacement of the method for determination of chromium VI by a reference to ISO 17075; withdrawal of 5.11, “Determination of the electrical insulation”.ISO 20344:2011(E) ISO 2011 All rights reserved vBS EN ISO 20344:2011BS EN ISO 20344:2011INTERNATIONAL STANDARD ISO 203

38、44:2011(E)Personal protective equipment Test methods for footwear1 ScopeThis International Standard specifies methods for testing footwear designed as personal protective equipment.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For da

39、ted references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 34-1:2010, Rubber, vulcanised or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test piecesISO 868, Plastics

40、and ebonite Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)ISO 1817:2011, Rubber, vulcanised Determination of the effect of liquidsISO 3290-1, Rolling bearings Balls Dimensions and tolerancesISO 3376, Leather Physical and mechanical tests Determination o

41、f tensile strength and percentage extensionISO 3377-2, Leather Physical and mechanical tests Determination of tear load Part 2: Double edge tearISO 4045, Leather Determination of pHISO 4643:1992, Moulded plastic footwear Lined or unlined poly (vinyl chloride) boots for general industrial use Specifi

42、cationISO 4649:2010, Rubber, vulcanized or thermoplastic Determination of abrasion resistance using a rotating cylindrical drum deviceISO 4674-1:2003, Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methodsISO 5423:1992, Moulded plastic footwear Line

43、d or unlined polyurethane boots for general industrial use SpecificationISO 13287, Personal protective equipment Footwear Test method for slip resistanceISO 17075, Leather Chemical analysis Determination of chromium VIISO 20345:2011, Personal protective equipment Safety footwearISO 20347, Personal p

44、rotective equipment Occupational footwearISO 23529:2010, Rubber General procedures for preparing and conditioning test pieces for physical test methodsEN 388:2003, Protective gloves against mechanical risksEN 12568:2010, Foot and leg protectors Requirements and test methods for toecaps and penetrati

45、on-resistant inserts ISO 2011 All rights reserved 1BS EN ISO 20344:20113 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 20345 and ISO 20347 apply.4 Sampling and conditioning4.1 SamplingThe minimum number of samples to be tested in order to check compli

46、ance with the requirements specified in ISO 20345, ISO 20347 and any specific job-related footwear standards (e.g. ISO 17249, Safety footwear with resistance to chain saw cutting), together with the minimum number of test pieces taken from each sample, shall be in accordance with Table 1.Wherever po

47、ssible and necessary to ensure the essential safety requirements, test pieces shall be taken from the whole footwear. This paragraph is applicable to all of Table 1.NOTE 1 If it is not possible to obtain a large enough test piece from the footwear, then a sample of the material from which the compon

48、ent has been manufactured may be used instead. This should be noted in the test report.NOTE 2 Footwear sizes are defined in Annex C.Where samples are required from each of three sizes, these shall comprise the smallest, middle and largest size of the footwear under test indicated as (SML) in Table 1

49、.4.2 ConditioningAll test pieces shall be conditioned in a standard atmosphere of (23 2) C and (50 5) % RH for a minimum of 48 h before testing, unless otherwise stated in the test method.The maximum time which shall elapse between removal from the conditioning atmosphere and the start of testing shall not be greater than 10 min, unless otherwise stated in the test method.4.3 Prerequisites on the testing procedureWhen several test pieces are tested, at least the worst results per size