EN ISO 20349-2010 en Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test m.pdf

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 20349:2010Personal protective equipment Footwear protecting againstthermal risks and moltenmetal splashes as found infoundries and welding Requirements and test method(

2、ISO 20349:2010)BS EN ISO 20349:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO20349:2010. It supersedes BS 4676:2005 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PH/1, Safety, protective and occupational

3、 footwear.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 58786 3ICS 13.340.50Compliance w

4、ith a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2010.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO

5、20349 December 2010 ICS 13.340.50 English Version Personal protective equipment - Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding - Requirements and test method (ISO 20349:2010)quipement de protection individuelle - Chaussures de protection contr

6、e les risques thermiques et les projections de mtal fondu comme rencontrs dans les fonderies et lors doprations de soudage - Exigences et mthode dessai (ISO 20349:2010) Persnliche Schutzausrstung - Schuhe zum Schutz gegen thermische Risiken und Spritzer geschmolzenen Metalls - Anforderungen und Prfv

7、erfahren (ISO 20349:2010) This European Standard was approved by CEN on 30 October 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis

8、ts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under

9、 the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, G

10、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORM

11、UNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20349:2010: EBS EN ISO 20349:2010EN ISO 20349:2010 (E) 3 Foreword This document (EN ISO 20349:2010) has been prepared

12、 by Technical Committee CEN/TC 161 “Foot and leg protectors“, the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment“. This European Standard shall be given the status of a national standard, either by publica

13、tion of an identical text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at the latest by June 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall no

14、t be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For relationship with EU Directive, see informati

15、ve Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fi

16、nland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 20349:2010 has been approved by CEN as a E

17、N ISO 20349:2010 without any modification. BS EN ISO 20349:2010EN ISO 20349:2010 (E) 4 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal protective equipment This European Standard has been prepared under a mandate g

18、iven to CEN by the European Commission and the European Free Trade Association to provide a means of conforming to Essential Requirements of the New Approach Directive 89/686/EEC Personal protective equipment. Once this standard is cited in the Official Journal of the European Union under that Direc

19、tive and has been implemented as a national standard in at least one Member State, compliance with the clauses of this standard given in table ZA confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding Essential Requirements of that Directive and

20、associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and Directive 89/686/EEC Personal protective equipment Clause(s)/sub-clause(s) of this EN Essential Requirements (ERs) of Directive 89/686/EEC Qualifying remarks/Notes 5.2 1.1.1 Ergonomics 5.2 1.1.2.1 Highest level

21、 of protection possible 5.1 1.2.1 Absence of risks and other inherent nuisance factors 5.2 1.2.1.2 Satisfactory surface condition of all PPE parts in contact with the user 5.2 1.2.1.3 Maximum user impediment 7 1.4 Information supplied by the manufacturer 6 2.12 PPE bearing one or more identification

22、 or recognition marks directly or indirectly relating to health and safety 5.3, 5.4, 5.5, 5.6 and 5.7 3.6 Protection against heat and/or fire This ER should be considered partially verified, at least in regard to molten metal (Fe/Al) splashes. Temperature increase (related to thermal capacity) insid

23、e the footwear is not determined WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. BS EN ISO 20349:2010ISO 20349:2010(E) ISO 2010 All rights reserved iiiContents Page Foreword iv 1 Scope1 2 Normative references1 3 Terms

24、and definitions .2 4 Requirements.2 5 Specific requirements.6 5.1 Footwear design6 5.2 Ergonomic performance and compatibility 6 5.3 Resistance to the effects of molten metal 6 5.4 Small molten metal splash test6 5.5 Resistance of upper to contact heat transmission7 5.6 Burning behaviour of upper ma

25、terial 7 5.7 Heat insulation of sole complex 7 5.8 Surface shrinkage of leather 7 6 Marking.7 7 Information to be supplied by the manufacturer .8 Annex A (normative) Test method for the resistance of footwear to the effects of large quantities of molten metal10 Annex B (normative) Assessment of ergo

26、nomic performance and compatibility of footwear 13 Annex C (normative) Method for determination of burning behaviour of footwear upper .15 Bibliography16 BS EN ISO 20349:2010ISO 20349:2010(E) iv ISO 2010 All rights reservedForeword ISO (the International Organization for Standardization) is a worldw

27、ide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on th

28、at committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in

29、accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard r

30、equires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 20349 was prepared by the

31、European Committee for Standardization (CEN) Technical Committee ISO/TC 161, Foot and leg protectors in equipment, in collaboration with ISO Technical Committee ISO/TC 94 Personal safety Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the Agreement on techni

32、cal cooperation between ISO and CEN (Vienna Agreement). BS EN ISO 20349:2010INTERNATIONAL STANDARD ISO 20349:2010(E) ISO 2010 All rights reserved 1Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test

33、 method WARNING This International Standard calls for the use of substances and/or procedures that may be injurious to health if adequate precautions are not taken. It refers only to technical suitability and does not absolve the user from legal obligations relating to health and safety at any stage

34、. 1 Scope This International Standard specifies requirements and test methods for footwear protecting users against thermal risks and molten iron or aluminium metal splashes such as those encountered in foundries, welding and allied process. Footwear complying with this International Standard also o

35、ffers other protection as defined in ISO 20345. NOTE Gaiters, over boot and clothing intended to provide protection to the feet and legs against molten metal are addressed by ISO 11611 and ISO 11612. 2 Normative references The following referenced documents are indispensable for the application of t

36、his document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7000:2004, Graphical symbols for use on equipment Index and synopsis ISO 9185:2007, Protective clothing Assessment of resi

37、stance of materials to molten metal splash ISO 15025:2000, Protective clothing Protection against heat and flame Method of test for limited flame spread ISO 17227:2002, Leather Physical and mechanical tests Determination of dry heat resistance of leather ISO 20344:2004/Amd.1:2007, Personal protectiv

38、e equipment Test methods for footwear Amendment 1 ISO 20345:2004/Amd.1:2007, Personal protective equipment Safety footwear Amendment 1 EN 348, Protective clothing Test method: Determination of behaviour of materials on impact of small splashes of molten metal EN 702, Protective clothing Protection a

39、gainst heat and flame Test method: Determination of the contact heat transmission through protective clothing or its materials BS EN ISO 20349:2010ISO 20349:2010(E) 2 ISO 2010 All rights reserved3 Terms and definitions For the purposes of this document the following terms and definitions apply. 3.1

40、large molten metal splash large projections of molten metal such as found in foundries 3.2 small molten metal splash small splashes of molten metal as produced during welding operations and allied processes 4 Requirements Footwear shall be classified in accordance with Table 1. Table 1 Classificatio

41、n of footwear Code designation Classification I Footwear made from leather and other materials, excluding all-rubber or all-polymeric footwear II All-rubber (i.e. entirely vulcanized) or all-polymeric (i.e. entirely moulded) footwear Footwear shall conform to the requirements specified in Table 2. A

42、ssessment and testing shall be carried out on three samples of the footwear, one of the smallest, one of the middle and one of the largest size of the manufactured size range. BS EN ISO 20349:2010ISO 20349:2010(E) ISO 2010 All rights reserved 3Table 2 Performance requirements Standard clause Foundry

43、 footwear Welding footwear Requirements ISO 20345 ISO 20349 Class I Class I Class IIHeight of upper 5.1 X X X Seat region 5.2.2 X X X Design Sole performance: 5.3.1 Construction 5.3.1.1 X X Upper/outsole bond strength 5.3.1.2 X X Toe protection: 5.3.2 General 5.3.2.1 X X X Internal length 5.3.2.2 X

44、X X Impact resistance 5.3.2.3 X X X Compression resistance 5.3.2.4 X X X Behaviour of toecaps 5.3.2.5 X X X Leak-proofness 5.3.3 X Specific ergonomic features 5.2 X 5.3.4 X X Slip resistance Amd.1:2007 Annex A Slip resistance on tile floor ceramic with SLS aSlip resistance on steel floor with glycer

45、ol bWhole footwear Slip resistance on ceramic tile floor with SLS and on steel floor with glycerol cX X X BS EN ISO 20349:2010ISO 20349:2010(E) 4 ISO 2010 All rights reservedTable 2 (continued) Standard clause Foundry footwear Welding footwear Requirements ISO 20345 ISO 20349 Class I Class I Class I

46、IPenetration resistance (P) 6.2.1 * * * Conductive footwear (C) 6.2.2.1 not allowed Antistatic footwear (A) 6.2.2.2 * * * Electrically insulating footwear (I) 6.2.2.3 * * * Cold insulation of sole complex (CI) 6.2.3.2 * * * Energy absorption of seat region (E) 6.2.4 * * * Water resistance (WR) 6.2.5

47、 * * Metatarsal protection (M) 6.2.6 * * * Ankle protection (AN) 6.2.7 * * * Resistance to effects of molten metal (Fe or Al) 5.3 X Molten metal splashes (WG) 5.4 * X X Resistance of upper to contact heat transmission 5.5 X Burning behaviour of upper material 5.6 X X X Whole footwear Heat insulation

48、 of sole complex (HI1 or HI3) 5.7 X * * Design 5.1 X X General 5.4.1 X Thickness 5.4.2 X Tear strength 5.4.3 X X Tensile properties 5.4.4 X Flexing resistance 5.4.5 X Water vapour permeability and coefficient 5.4.6 X X pH value 5.4.7 X X Hydrolysis 5.4.8 X Chromium VI content 5.4.9 X X Water penetra

49、tion and water absorption (WRU) 6.3.1 X X Cut resistance (CR) 6.3.3 * * * Surface shrinkage 5.8 X Upper (all parts) Insole/ insock Table 3 X X O BS EN ISO 20349:2010ISO 20349:2010(E) ISO 2010 All rights reserved 5Table 2 (continued) Standard clause Foundry footwear Welding footwear Requirements ISO 20345 ISO 20349 Class I Class I Class IITear strength 5.5.1 X X O Abrasion resistance 5.5.2 X X O Water vapour permeability and coefficient 5.5.3 X X O pH value 5.5.4 X X O Chromium VI c