EN ISO 21007-2-2015 en Gas cylinders - Identification and marking using radio frequency identification technology - Part 2 Numbering schemes for radio frequency identification《气瓶 使.pdf

1、BSI Standards PublicationBS EN ISO 21007-2:2015Gas cylinders Identificationand marking using radiofrequency identificationtechnologyPart 2: Numbering schemes for radiofrequency identificationBS EN ISO 21007-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN

2、ISO21007-2:2015. It supersedes BS EN ISO 21007-2:2013 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PVE/3/7, Gas containers - Gas cylinder (receptacle)operations.A list of organizations represented on this committee can beobtained on request to its sec

3、retary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82555 2ICS 23.020.30Compliance with a British Standard cannot

4、confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2016.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 21007-2 De

5、cember 2015 ICS 23.020.30 Supersedes EN ISO 21007-2:2013English Version Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015) Bouteilles gaz - Identification et marquage laide de la

6、 technologie didentification par radiofrquences - Partie 2: Schmas de numrotage pour identification par radiofrquences (ISO 21007-2:2015) Gasflaschen - Identifizierung und Kennzeichnung mittels Hochfrequenzidentifizierungstechnologie - Teil 2: Nummerierungssysteme fr die Hochfrequenzidentifizierung

7、(ISO 21007-2:2015) This European Standard was approved by CEN on 1 April 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

8、liographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo

9、nsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Rep

10、ublic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMA

11、LISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 21007-2:2015 EBS EN ISO 21007-2:2015EN ISO 21007-2:2015 (E) 3 Europea

12、n foreword This document (EN ISO 21007-2:2015) has been prepared by Technical Committee ISO/TC 58 “Gas cylinders“ in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat of which is held by BSI. This European Standard shall be given the status of a national

13、standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

14、CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 21007-2:2013. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standa

15、rd: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spai

16、n, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 21007-2:2015 has been approved by CEN as EN ISO 21007-2:2015 without any modification. BS EN ISO 21007-2:2015ISO 21007-2:2015(E)Foreword vIntroduction vi1 Scope . 12 Normative references 13 Terms, definitions a

17、nd numerical notations . 13.1 Terms and definitions . 13.2 Numerical notations . 24 Data presentation 34.1 General requirements . 34.2 ASN.1 messages 34.3 Message identification requirements 34.4 Predetermined context and the use of packed encoding rules . 44.5 Sample GC data structure constructs 45

18、 Gas cylinder identification structure (variable) . 45.1 General requirements . 45.2 Data structure construct . 55.2.1 General 55.2.2 Data scheme identifier (DSI) . 55.2.3 Length 55.2.4 Data field . 56 Gas cylinder identification data schemes (variable) 56.1 General requirements . 56.2 Data scheme “

19、01”: numbering (binary) 66.2.1 General 66.2.2 Issuer country code . 76.2.3 Registration body 76.2.4 Issuer identifier 76.2.5 Unique number . 76.2.6 Conclusion . 76.3 Data scheme “02”: numbering (ASCII) . 86.3.1 General 86.3.2 Issuer country code . 86.3.3 Registration body 86.3.4 Issuer identifier 86

20、.3.5 Unique string . 96.3.6 Conclusion . 96.4 Data scheme “10”: cylinder manufacturer information (optional) . 96.4.1 Overview . 96.4.2 General 96.4.3 Manufacturer code . 96.4.4 Manufacturer serial number. 106.5 Data scheme “11”: cylinder approval information (optional) .106.5.1 General. 106.5.2 Cou

21、ntry code 106.6 Data scheme “12”: cylinder package information (optional).106.6.1 General. 106.6.2 Water capacity (l) .116.6.3 Working pressure (bar) 116.6.4 Test pressure (bar)116.6.5 Tare weight (kg) 126.6.6 Last test date 126.7 Data scheme “13”: cylinder content information (optional) 12 ISO 2015

22、 All rights reserved iiiContents PageBS EN ISO 21007-2:2015ISO 21007-2:2015(E)6.7.1 General. 126.7.2 Content code .126.7.3 Fill date 136.8 Data scheme “14”: commercial product information (optional) 136.8.1 General. 136.8.2 Quantity 136.8.3 Quantity unit code .136.8.4 Product ID . 136.9 Data scheme

23、“15”: production lot information (optional) .146.9.1 General. 146.9.2 Expiration date .146.9.3 Lot ID . 146.10 Data scheme “16”: accessories information (optional) 146.11 Data scheme “20”: acetylene specifics (optional) 146.11.1 General. 146.11.2 Porous mass characteristics 157 Gas cylinder identifi

24、cation structure (optimized storage size) 157.1 General 157.2 Data structure construct 157.2.1 General. 157.2.2 DSI (fix) . 167.2.3 Data item attribute 167.2.4 Remarks 168 Air interface specifications .168.1 Technical requirements 168.2 Downlink and uplink 168.3 Standard downlink/uplink parameters .

25、 179 Transponder memory addressing 179.1 General requirements 179.2 Modbus/JBUS implementation 18Annex A (normative) Technical solution .19Annex B (informative) List of codes for registration bodies .20Annex C (informative) Gas quantity units code 21Annex D (informative) Host to interrogator to Modb

26、us communication protocol 22Annex E (informative) Data scheme identifier (DSI) definition for fixed length format .27Bibliography .41iv ISO 2015 All rights reservedBS EN ISO 21007-2:2015ISO 21007-2:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of n

27、ational standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. Inter

28、national organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those inte

29、nded for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www

30、.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document w

31、ill be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expres

32、sions related to conformity assessment, as well as information about ISOs adherence to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 58, Gas cylinders, Subcommittee SC 4, Op

33、erational requirements for gas cylinders.This third edition cancels and replaces the second edition (ISO 21007-2:2013), which has been technically revised with the following changes: a new registration body has been added to Annex B; a new Annex E has been added; the former Annex C, which provided a

34、 list of RFID codes, as well as marks for gas cylinder manufacturers, has been removed from this part of ISO 21007 and will be published in a separate document, ISO/TR 17329.ISO 21007 consists of the following parts, under the general title Gas cylinders Identification and marking using radio freque

35、ncy identification technology: Part 1: Reference architecture and terminology Part 2: Numbering schemes for radio frequency identification ISO 2015 All rights reserved vBS EN ISO 21007-2:2015ISO 21007-2:2015(E)IntroductionCylinders can contain a wide variety of gases, and identification is of paramo

36、unt importance. It could be desirable to identify not only the type of gas or liquid contained in the GC, but also such details as the filling station where the cylinder was filled, the batch of cylinders filled and the date the cylinder was filled.Various methods and technologies such as physical i

37、dentification through indentation; paper, card, metal and plastic labelling; colour code identification; bar coding and, in some circumstances, vision systems are already used to make or assist such identifications.The technology of radio frequency identification (RFID) involves a reader/interrogato

38、r station that transmits a predetermined signal of inductive, radio or microwave energy to one or many transponders located within a read zone. The transponder returns the signal in a modified form to the reader/interrogator and the data are decoded. The data component in a portable gas or liquid cy

39、linder environment provides the basis for unambiguous identification of the transponder and also can provide a medium for a bi-directional interactive exchange of data between the reader/interrogator and transponder. The signal can be modulated or unmodulated according to architecture of the system.

40、Recently, RFID has started using new, higher frequencies called ultra high frequency (UHF). These higher frequencies facilitate a faster reading and writing process and deliver longer reading/writing distances. Therefore, the UHF band frequency has been included in this part of ISO 21007. The aim of

41、 this part of ISO 21007 is to provide the data structure respectively suitable for all frequency bands including UHF.In many cases, it is necessary or desirable to use one air carrier frequency and protocol; however, this will not always be the case. Within a global market, different applications co

42、uld require different solutions for the carrier frequency (e.g. reading distance and velocity) and protocols (e.g. security, company rule).However, there is benefit in using a standard common core data structure that is capable of upwards integration and expandable from the simplest low-cost cylinde

43、r identification system to more complex functions. Such a structure will have to be flexible and enabling rather than prescriptive, thus enabling different systems degrees of interoperability within and between their host systems.The use of Abstract Syntax Notation One (ASN.1, as defined in the ISO/

44、IEC 8824 series) from ISO/IEC 8824-1 as a notation to specify data and its associated Packed Encoding Rules (PER) from ISO/IEC 8825-2 is widely used and gaining popularity. Its usage will provide maximum interoperability and conformance to existing standards and will meet the specifically defined re

45、quirements for a generic standard model for gas cylinder identification in that it enables and uses existing standard coding, is adaptable and expandable, does not include unnecessary information for a specific application, and has a minimum of overhead in storage and transmission.RFID standards oth

46、er than ASN.1, for definition of frequencies and protocols, have been developed within recent years see ISO/IEC 18000 (all parts).ISO 21007-1 provides a framework reference architecture for such systems. This part of ISO 21007 is a supporting part to ISO 21007-1 and provides a standardized yet flexi

47、ble and interoperable framework for numbering schemes. This part of ISO 21007 details individual numbering schemes within the framework for the automatic identification of gas cylinders.Central to the effective use of many of the constructs is a structure to provide unambiguous identification. This

48、part of ISO 21007 provides a standardized data element construct for the automatic identification of gas cylinders.vi ISO 2015 All rights reservedBS EN ISO 21007-2:2015ISO 21007-2:2015(E)The inconvenience of such a flexible concept is that a large storage memory is needed, particularly if a large am

49、ount of information has to be stored and read directly from the RFID tag.The following two alternatives could be used to address this issue: limit the information directly accessible on the RFID tag and obtain the additional information from the host (ERP system); use a fixed data structure and length as shown in Annex E, as this can minimize the storage demand.This part of ISO 21007 is intended to be used under a variety of national regulatory regimes, but has been written so that it is suitable for the application of the UN Model Regulati